Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 22833941
Front Crossmember

1999-2020 GM

Customer Questions & Expert Answers (9)
GM 22833941 Front Crossmember
  • Part Description
    Crossmember
  • Position
    Front
  • Replaces
    15201007, 15716565
  • Manufacturer
    General Motors
Make sure this part fits
$186.99 MSRP: $279.56
You Save: $92.57 (34%)
Ships in 1-3 Business Days
1
ADD TO CART

  • 22833941 Front Crossmember is Ref No. 5 in the diagram below

    2015 Cadillac Escalade Front Crossmember Diagram for 22833941
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 22833941

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2020 Cadillac EscaladeBase, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium, Premium Luxury8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2003-2020 Cadillac Escalade ESVBase, Luxury, Platinum, Premium, Premium Luxury8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2002-2013 Cadillac Escalade EXTBase, Luxury, Premium8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2013 Chevrolet AvalancheBlack Diamond LS, Black Diamond LT, Black Diamond LTZ, LS, LT, LTZ8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002 Chevrolet Avalanche 2500Base8 Cyl 8.1 L GAS
    1999-2019 Chevrolet Silverado 1500Base, Custom, Custom Trail Boss, High Country, Hybrid, LS, LT, LT Trail Boss, LTZ, RST, SS, SSV, WT, XFE, Z71 Off-Road6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 22833941 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 22833941 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Front Cross-Member for the Engine (4WD) on Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    After supporting the raised vehicle it is possible to replace the Engine Front Crossmember (4WD). Begin by removing the differential carrier shield and frame bolts of the crossmember before extracting it from the vehicle. Before installing bolts into the crossmember ensure complete removal of all residual adhesive material from its original placement position. Clean the bolts' threads using denatured alcohol before they dry completely. Put GM P/N 12345493 Threadlocker (Canadian P/N 10953488) onto each bolt. Use a torque wrench to tighten the bolts which secure the crossmember to the frame until they reach 120 N.m (88 lb ft). Reinstall the differential carrier shield afterward lowering the vehicle back down.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Front Cross-Member on a 4WD on Chevrolet Silverado 1500? Posted by Customer
    A:
    A 4WD vehicle requires a method for raising and supporting it during front engine crossmember replacement. Begin by pulling out both the differential carrier shield and crossmember frame bolts and afterward extract the crossmember from the vehicle. Follow these steps during installation: put the crossmember back into position on the vehicle as you re-install the framing bolts with a 120 N.m (88 lb ft) torque value. Reinstallation of the differential carrier shield must follow while performing the vehicle descent.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Front Cross-Member for the Engine (4WD) on Chevrolet Suburban 1500? Posted by Customer
    A:
    Replacing the Engine Front Crossmember (4WD) begins by properly raising and supporting the vehicle. First cut off the differential carrier shield before loosening the frame bolts securing the crossmember. After that, extract the crossmember from the vehicle. After correctly positioning the crossmember place the bolts for installation but verify complete removal of original adhesive residue first. By using denatured alcohol or its equivalent to clean the bolt threads let them dry before installation. Utilize Threadlocker GM P/N 12345493 (Canadian P/N 10953488) on these bolts. Tighten frame securing bolts to 120 N.m (88 lb ft) torque while installing the crossmember. After completing the repair reinstall the differential carrier shield while lowering the vehicle back down to the ground.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Front Cross-Member for the Engine (4WD) on Chevrolet Tahoe? Posted by Customer
    A:
    Replacing the Engine Front Crossmember (4WD) begins by properly raising and supporting the vehicle. First cut off the differential carrier shield before loosening the frame bolts securing the crossmember. After that, extract the crossmember from the vehicle. After correctly positioning the crossmember place the bolts for installation but verify complete removal of original adhesive residue first. By using denatured alcohol or its equivalent to clean the bolt threads let them dry before installation. Utilize Threadlocker GM P/N 12345493 (Canadian P/N 10953488) on these bolts. Tighten frame securing bolts to 120 N.m (88 lb ft) torque while installing the crossmember. After completing the repair reinstall the differential carrier shield while lowering the vehicle back down to the ground.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Front Cross-Member on a 4WD on GMC Yukon? Posted by Customer
    A:
    A 4WD vehicle requires a method for raising and supporting it during front engine crossmember replacement. Begin by pulling out both the differential carrier shield and crossmember frame bolts and afterward extract the crossmember from the vehicle. Follow these steps during installation: put the crossmember back into position on the vehicle as you re-install the framing bolts with a 120 N.m (88 lb ft) torque value. Reinstallation of the differential carrier shield must follow while performing the vehicle descent.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front cross-member for the engine (2WD) on GMC Sierra 1500 Classic? Posted by Customer
    A:
    Vehicle elevation is necessary before starting an engine front crossmember (2WD) replacement task. Start by breaking free the engine crossmember bolts and then pull out the engine crossmember using a proper procedure. The installation procedure starts with positioning the engine crossmember properly. Before inserting the bolts you must remove all residue from the original adhesive patch and use alcohol or an equivalent to clean and dry the threads of the bolts. Use threadlocker GM P/N 12345493 (Canadian P/N 10953488) when applying the bolts. After installing the engine crossmember bolts tighten them to 120 N.m (88 lb ft). Finally, lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front cross-member on a 2WD on GMC Yukon XL 1500? Posted by Customer
    A:
    Vehicle elevation is the first step before starting the process of replacing the engine front crossmember for 2WD vehicles. First remove the bolts from the engine crossmember before removing the crossmember itself. Position the engine crossmember before bolt installation but eliminate all remnants of original adhesive patch from the installation area. To prepare for bolt installation soak their threads with denatured alcohol or a similar substance while they dry. Use Threadlocker GM P/N 12345493 (Canadian P/N 10953488) to apply to the bolts. Secure engine crossmember bolts at 120 N.m using 88 lb ft of torque. Finally, lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Front Cross-Member on a 4WD on GMC Sierra 1500? Posted by Customer
    A:
    A 4WD vehicle requires a method for raising and supporting it during front engine crossmember replacement. Begin by pulling out both the differential carrier shield and crossmember frame bolts and afterward extract the crossmember from the vehicle. Follow these steps during installation: put the crossmember back into position on the vehicle as you re-install the framing bolts with a 120 N.m (88 lb ft) torque value. Reinstallation of the differential carrier shield must follow while performing the vehicle descent.
    Posted by ChevyPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Front Crossmember 22833941 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 22833941 Front Crossmember is available in the market under the name GM Front Cross-Member. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 22833941 Front Crossmember fits certain Chevrolet Tahoe, Avalanche, Silverado 1500 models, as well as GMC Sierra 1500, Yukon, Yukon XL. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 22833941 maintains top performance when functioning as the Crossmember unit at its Front. The component 22833941 is constructed from durable material and its dimensions span 38.0 x 2.4 x 2.5 inches while weighing 7.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Crossmember, Front Frame Cross Member. The part 22833941 has available replacement options 15201007, 15716565. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.