Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 24235619
Master Cylinder

2003-2007 GM

Customer Questions & Expert Answers (9)
GM 24235619 Master Cylinder
GM 24235619 Master Cylinder
GM 24235619 Master Cylinder
GM 24235619 Master Cylinder
GM 24235619 Master Cylinder
  • Part Description
    Cylinder Assembly-Clutch Master; Clutch Master Cylinder
  • Replaces
    24232433, 12572804
  • Manufacturer
    General Motors
Make sure this part fits
$141.77 MSRP: $223.08
You Save: $81.31 (37%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2003-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2003-2006 Chevrolet Silverado 1500Base, Hybrid, LS, LT, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2003-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 24235619 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 24235619 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Clutch Master Cylinder on Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Start by disconnecting the clutch pedal position switch electrical connector when replacing the Clutch Master Cylinder. You must push the clutch pedal in then crimp the pushrod bushing tabs together to extract the pushrod bushing from the clutch pedal. Motorcycles with nv 3500 or nv 4500 transmission must disconnect the clutch actuator cylinder from its quick connect fitting to the Clutch Master Cylinder while zf s6-650 transmission models require the same disconnection procedure. First remove the Clutch Master Cylinder clip which attaches to the brake pressure module valve pipe then turn the Clutch Master Cylinder clockwise 45 degrees to unlock it before you can remove the cylinder. When installing the Clutch Master Cylinder users must first install the zf s6-650 transmission then follow with the nv 3500 or nv 4500 transmission as needed. To lock the Clutch Master Cylinder rotate the device 45 degrees counterclockwise. Reinstall the clutch actuator cylinder to Clutch Master Cylinder quick connect fitting for both transmission models before attaching the Clutch Master Cylinder clip onto the brake pressure module valve pipe. Fluctuate the clutch pedal using gentle pressure to unite the pushrod socket with the clutch pedal before reconnecting the clutch pedal position switch electrical connector . Afterward, proceed to pump the pedal three times to verify proper connection before engine start.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Clutch Master Cylinder on Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Start by disconnecting the clutch pedal position switch electrical connector when replacing the Clutch Master Cylinder. You must push the clutch pedal in then crimp the pushrod bushing tabs together to extract the pushrod bushing from the clutch pedal. Motorcycles with nv 3500 or nv 4500 transmission must disconnect the clutch actuator cylinder from its quick connect fitting to the Clutch Master Cylinder while zf s6-650 transmission models require the same disconnection procedure. First remove the Clutch Master Cylinder clip which attaches to the brake pressure module valve pipe then turn the Clutch Master Cylinder clockwise 45 degrees to unlock it before you can remove the cylinder. When installing the Clutch Master Cylinder users must first install the zf s6-650 transmission then follow with the nv 3500 or nv 4500 transmission as needed. To lock the Clutch Master Cylinder rotate the device 45 degrees counterclockwise. Reinstall the clutch actuator cylinder to Clutch Master Cylinder quick connect fitting for both transmission models before attaching the Clutch Master Cylinder clip onto the brake pressure module valve pipe. Fluctuate the clutch pedal using gentle pressure to unite the pushrod socket with the clutch pedal before reconnecting the clutch pedal position switch electrical connector . Afterward, proceed to pump the pedal three times to verify proper connection before engine start.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Clutch Master Cylinder on GMC Sierra 1500 Classic? Posted by Customer
    A:
    Start by disconnecting the clutch pedal position switch electrical connector when replacing the Clutch Master Cylinder. You must push the clutch pedal in then crimp the pushrod bushing tabs together to extract the pushrod bushing from the clutch pedal. Motorcycles with nv 3500 or nv 4500 transmission must disconnect the clutch actuator cylinder from its quick connect fitting to the Clutch Master Cylinder while zf s6-650 transmission models require the same disconnection procedure. First remove the Clutch Master Cylinder clip which attaches to the brake pressure module valve pipe then turn the Clutch Master Cylinder clockwise 45 degrees to unlock it before you can remove the cylinder. When installing the Clutch Master Cylinder users must first install the zf s6-650 transmission then follow with the nv 3500 or nv 4500 transmission as needed. To lock the Clutch Master Cylinder rotate the device 45 degrees counterclockwise. Reinstall the clutch actuator cylinder to Clutch Master Cylinder quick connect fitting for both transmission models before attaching the Clutch Master Cylinder clip onto the brake pressure module valve pipe. Fluctuate the clutch pedal using gentle pressure to unite the pushrod socket with the clutch pedal before reconnecting the clutch pedal position switch electrical connector . Afterward, proceed to pump the pedal three times to verify proper connection before engine start.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the installation process for the clutch master cylinder for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    If equipped with a ZF S6-650 transmission, install the clutch master cylinder, followed by the NV 3500 or NV 4500 transmission if applicable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Clutch Master Cylinder
    Q:
    What should be done with the clutch pedal during the replacement for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Push the clutch pedal in and squeeze the pushrod bushing tabs to release the pushrod bushing from the clutch pedal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Clutch Master Cylinder
    Q:
    What is the installation process for the clutch master cylinder for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    If equipped with a ZF S6-650 transmission, install the clutch master cylinder, followed by the NV 3500 or NV 4500 transmission if applicable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Clutch Master Cylinder
    Q:
    What is the first step to replace the Clutch Master Cylinder for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    First, disconnect the clutch pedal position switch electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Clutch Master Cylinder
    Q:
    What final steps should be taken before starting for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Apply light pressure to the clutch pedal to couple the pushrod socket to the clutch pedal, reconnect the clutch pedal position switch electrical connector, and pump the clutch pedal three times prior to starting the vehicle to ensure the connection is complete.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Clutch Master Cylinder
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Master Cylinder 24235619 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 24235619 Master Cylinder is available in the market under the name GM Clutch Master Cylinder. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 24235619 Master Cylinder fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 24235619 maintains top performance when functioning as the Cylinder Assembly-Clutch Master; Clutch Master Cylinder unit. The component 24235619 is constructed from durable material and its dimensions span 16.9 x 6.4 x 3.3 inches while weighing 1.10 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Cylinder, Hydraulic Clutch Main Cylinder. The part 24235619 has available replacement options 24232433, 12572804. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.