Make sure this part fits

GM 26053318
Axle Shaft, Front Driver Side

1995-2005 GM

Customer Questions & Expert Answers (11)
GM 26053318 Axle Shaft, Front Driver Side
  • Part Description
    Shaft, Front Axle
  • Position
    Front Driver Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number26053318
    Part DescriptionShaft, Front Axle
    Other NamesAxle Shafts; Shaft
    Item Dimensions16.1 x 3.7 x 3.4 inches
    Item Weight4.30 Pounds
    PositionFront Driver Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU26053318
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1995-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    1997-2004 Chevrolet S10Base, LS, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1995-2001 GMC JimmyBase, Diamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    1997-2004 GMC SonomaSL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1996-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26053318 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 26053318 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you disengage the wheel drive shaft from the hub for the 2005 Chevrolet Blazer? Posted by Customer
    A:
    Use a brass drift against the outer end of the drive axle, striking it sharply with a hammer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the next step after inserting the drift for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Remove the axle nut and washer, then take out the drift from the brake rotor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the torque specification for tightening the frame bracket nuts for the 2003 Chevrolet S10? Posted by Customer
    A:
    Tighten the frame bracket nuts to 98 Nm (72 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What safety precautions should be taken during this process for the 2002 Chevrolet S10? Posted by Customer
    A:
    Do not allow the vehicle's weight to load the front wheels or operate the vehicle when the wheel drive shafts or nuts are removed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the first step to replace the rear axle shaft for the 2003 Chevrolet S10? Posted by Customer
    A:
    Raise the vehicle and remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you detach the axle shaft for the 2000 GMC Jimmy? Posted by Customer
    A:
    Detach the C-lock from the button end of the axle shaft and push the axle shaft toward the center of the vehicle, marking it as left or right.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done with the axle shaft during removal for the 2002 Chevrolet S10? Posted by Customer
    A:
    Push the flange of the axle shaft toward the differential and remove the C-lock from the button end of the axle shaft. Important: Do not rotate the axle shaft during removal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How should the inner axle shaft housing be attached to the differential carrier assembly for the 2001 GMC Jimmy? Posted by Customer
    A:
    Attach the inner axle shaft housing to the differential carrier assembly, tightening the bolt at the 1 o'clock position finger tight before pulling the housing down to install the bolt at the 11 o'clock position, also finger tight.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you align the lock with the thrust block for the 2001 GMC Jimmy? Posted by Customer
    A:
    Use a screwdriver or similar tool to rotate the lock until it aligns with the thrust block.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done to protect the outer tie rod and ABS wire for the 2004 GMC Sonoma? Posted by Customer
    A:
    Support the steering knuckle assembly with wire.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 26053318, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 26053318 Axle Shaft, Front Driver Side. It is sometimes referred to as GM Axle Shaft. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 26053318 Axle Shaft, Front Driver Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery