Make sure this part fits

GM 88963639
Fuel Gauge Sending Unit

2001-2005 GM

Customer Questions & Expert Answers (17)
GM 88963639 Fuel Gauge Sending Unit
  • Part Description
    Sensor Kit, Fuel Tank Meter/Pump; Fuel Level Sensor; Fuel Sending Unit
  • Replaces
    25326326
  • Manufacturer
    General Motors
Make sure this part fits
$192.97 MSRP: $346.14
You Save: $153.17 (45%)
Ships in 1 Business Day
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2001-2005 Buick LeSabreCustom, Limited6 Cyl 3.8 L GAS
    2001-2005 Buick Park AvenueBase, Ultra6 Cyl 3.8 L GAS
    2001-2005 Cadillac DeVilleBase, DHS, DTS, Protection Series8 Cyl 4.6 L GAS
    2001-2004 Cadillac SevilleSLS, STS8 Cyl 4.6 L GAS
    2001-2002 Oldsmobile AuroraBase6 Cyl 3.5 L GAS, 8 Cyl 4.0 L GAS
    2001-2005 Pontiac BonnevilleGXP, SE, SLE, SSEi6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 88963639 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88963639 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the fuel level sensor on Cadillac DeVille? Posted by Customer
    A:
    The first step to replace a fuel level sensor includes disconnecting both the fuel sender assembly and electrical connector for the fuel pump. Unfasten the retaining clip which holds the fuel level sensor electrical connector in place before disconnecting the connector that is underneath the fuel sender cover. Next remove the fuel level sensor retaining clip after compressing the locking tangs before pulling out the sensor. Start by putting in the fuel level sensor along with its retaining clip while you next join the fuel level sensor electrical connector before tightening it with the retaining clip. Reinstall the fuel sender assembly followed by connecting the fuel pump electrical connector as the final step. The work area requires forced air ventilation to reduce fuel vapor hazard while you must fill up all fuel system openings and instantly clean spills along with preventing sparks and clearly showing warning signs to staff.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done before positioning the new fuel sender seal for the 2005 Buick Park Avenue? Posted by Customer
    A:
    Clean and inspect the fuel sender sealing surfaces.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    Q:
    What is the first step to service the fuel gauge sender for the 2002 Buick LeSabre? Posted by Customer
    A:
    Remove the fuel sender assembly and disconnect the fuel pump electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    Q:
    What is the first step in the installation process for the 2004 Buick LeSabre? Posted by Customer
    A:
    Begin by placing the fuel level sensor back in position and securing it with the retaining clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    Q:
    What should be done after installing the new fuel level sensor for the 2001 Buick LeSabre? Posted by Customer
    A:
    Connect the fuel level sensor electrical connector and secure it with the retaining clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    Q:
    What should you do after securing the new fuel level sensor for the 2001 Buick Park Avenue? Posted by Customer
    A:
    Connect the fuel level sensor electrical connector and install its retaining clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    Q:
    What is the first step to replace the fuel level sensor for the 2005 Buick LeSabre? Posted by Customer
    A:
    First, remove the fuel sender assembly and disconnect the fuel pump electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    Q:
    What is the first step in the installation process for the 2002 Buick Park Avenue? Posted by Customer
    A:
    Place the fuel level sensor back in position and secure it with the retaining clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    Q:
    How do you remove the fuel level sensor for the 2003 Buick Park Avenue? Posted by Customer
    A:
    Remove the fuel level sensor retaining clip, then squeeze the locking tangs to extract the fuel level sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    Q:
    How do you remove the fuel level sensor for the 2001 Cadillac DeVille? Posted by Customer
    A:
    Remove the fuel level sensor retaining clip, squeeze the locking tangs, and extract the fuel level sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    Q:
    What tool is used to remove the fuel sender retaining ring for the 2005 Cadillac DeVille? Posted by Customer
    A:
    The fuel sender lock nut wrench.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    Q:
    What is the final step in the replacement process for the 2004 Cadillac DeVille? Posted by Customer
    A:
    Reconnect the fuel pump electrical connector and reinstall the fuel sender assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    Q:
    What should be done after securing the fuel level sensor for the 2002 Cadillac DeVille? Posted by Customer
    A:
    Connect the fuel level sensor electrical connector and install its retaining clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    Q:
    What do you do after installing the fuel level sensor for the 2004 Cadillac Seville? Posted by Customer
    A:
    Connect the fuel level sensor electrical connector and secure it with the retaining clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    Q:
    What is the final step in the process for the 2002 Cadillac Seville? Posted by Customer
    A:
    Connect the fuel pump electrical connector and reinstall the fuel sender assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    Q:
    What is the first step to service the fuel gauge sender for the 2003 Cadillac DeVille? Posted by Customer
    A:
    Begin by removing the fuel sender assembly and disconnecting the fuel pump electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Fuel Gauge Sending Unit 88963639 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 88963639 Fuel Gauge Sending Unit is available in the market under the name GM Fuel Tank Sending Unit, Fuel Level Sensor. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 88963639 Fuel Gauge Sending Unit fits certain Cadillac DeVille, Seville models, as well as Buick LeSabre, Park Avenue. Additionally, it is compatible with Pontiac Bonneville and Oldsmobile Aurora models.
The original GM component designated by manufacturer part number 88963639 maintains top performance when functioning as the Sensor Kit, Fuel Tank Meter/Pump; Fuel Level Sensor; Fuel Sending Unit unit. The component 88963639 is constructed from durable material and its dimensions span 7.8 x 5.8 x 5.6 inches while weighing 0.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Level Sensor; Sensor. The part 88963639 has available replacement options 25326326. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.