Make sure this part fits

GM 15993231
Hinge, Driver Side

1996-2024 GM

Customer Questions & Expert Answers (31)
GM 15993231 Hinge, Driver Side
  • Part Description
    Hinge Kit, Door Hinge
  • Position
    Driver Side
  • Manufacturer
    General Motors
Make sure this part fits
$128.34 MSRP: $191.87
You Save: $63.53 (34%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    1996-2014 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
    1996-2024 Chevrolet Express 2500Base, LS, LT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
    1996-2024 Chevrolet Express 3500Base, LS, LT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
    1996-1999 Chevrolet P30Base6 Cyl 4.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1996-2014 GMC Savana 1500Base, LS, LT, SLE, SLT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
    1996-2024 GMC Savana 2500Base, LS, LT, SLE, SLT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
    1996-2024 GMC Savana 3500Base, LS, LT, SLE, SLT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15993231 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15993231 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is important to do before tightening the screws for the 2005 Chevrolet Express 2500? Posted by Customer
    A:
    Align the door properly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you mark the hinge for removal for the 2011 Chevrolet Express 1500? Posted by Customer
    A:
    Mark the approximate centers of the mig welds on the hinge base.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done before installing the new hinges for the 2002 Chevrolet Express 2500? Posted by Customer
    A:
    Paint the inner and outer surfaces of the hinge pillar or door at the hinge mounting zone, then coat the mating surface of the hinge with a medium-bodied sealer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be adjusted after installing the door for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Adjust the adjacent front side door striker as necessary to achieve flushness between the two doors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after tightening the door for the 2010 Chevrolet Express 2500? Posted by Customer
    A:
    Apply sealer around the hinges and paint the hinge assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the front door hinge for the 2000 Chevrolet Express 3500? Posted by Customer
    A:
    Remove the sealer surrounding the hinge and scribe the location of the existing hinges on the body pillar or door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done if any weld remains for the 2008 Chevrolet Express 3500? Posted by Customer
    A:
    Use a chisel to separate the hinge from the body pillar or door, then remove the hinges.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done to the hinge mounting zone before installation for the 2011 Chevrolet Express 2500? Posted by Customer
    A:
    Paint the inner and outer surfaces of the hinge pillar or door at the hinge mounting zone, and coat the mating surface of the hinge with a medium-bodied sealer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the final tightening torque for the bolts for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Tighten the bolts to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you align the door during installation for the 2007 Chevrolet Express 2500? Posted by Customer
    A:
    Align the door and then tighten the screws.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is important to do before tightening the screws for the 2006 Chevrolet Express 1500? Posted by Customer
    A:
    Align the door properly before tightening the screws.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the next step after drilling pilot holes for the 2000 Chevrolet Express 3500? Posted by Customer
    A:
    Lightly sand the body side hinge surface to locate the 3 production welds, center punch them, and use a 19 mm (3/4 inch) rota-broach to drill out the remainder of the production hinge.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you reinstall the door for the 2003 Chevrolet Express 3500? Posted by Customer
    A:
    With assistance, reinstall the door and secure it temporarily with a bolt through the lower hinges.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the front door hinge for the 2007 GMC Savana 3500? Posted by Customer
    A:
    Remove the sealer surrounding the hinge and scribe the location of the existing hinges on the body pillar or door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you position the new hinges for the 2004 GMC Savana 1500? Posted by Customer
    A:
    Position the bolt-on service replacement hinges within the scribe marks made during removal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the next step after removing the door requiring hinge replacement for the 2011 GMC Savana 1500? Posted by Customer
    A:
    Remove the interior trim at the pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after installing the hinges for the 2003 GMC Savana 2500? Posted by Customer
    A:
    Install the door to the body, aligning it as necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What are the last steps after securing the door for the 2010 GMC Savana 1500? Posted by Customer
    A:
    Apply sealer around the hinges, paint the hinge assembly, and finally, install the door to the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you remove the hinge pin bushings for the 2009 GMC Savana 1500? Posted by Customer
    A:
    Use a suitable tool to remove the upper hinge pin bushings from the door and the lower hinge pin bushings from the body.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you locate the production welds on the body side hinge surface for the 2009 GMC Savana 2500? Posted by Customer
    A:
    Lightly sand the body side hinge surface to locate the 3 production welds, then center punch these welds for drilling.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after installing the door for the 2009 GMC Savana 2500? Posted by Customer
    A:
    Align the door as necessary and do not close it completely until visually checking that the lock will correctly engage the striker.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the procedure for marking the hinge location for the 2010 GMC Savana 3500? Posted by Customer
    A:
    Tape around the periphery of the body side hinge, move the backing plate rearward 4 mm (0.16 in), then mark the 3-hole pattern.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step in the installation process for the 2006 GMC Savana 3500? Posted by Customer
    A:
    Deburr the holes on the inside of the hinge pillar or door to ensure proper seating of the hinge and backing plate, inspecting the hinge seating zone for flatness.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after drilling the pilot holes for the 2001 GMC Savana 3500? Posted by Customer
    A:
    Drill a 13 mm (1/2 in) hole through the hinge base and the body pillar or door using the smaller hole as a pilot.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How should the screws be installed during the hinge installation for the 2002 GMC Savana 3500? Posted by Customer
    A:
    Install the screws, tightening them to 10 N.m (89 In lb).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What size hole should be drilled next for the 2001 GMC Savana 2500? Posted by Customer
    A:
    Drill a 13 mm (1/2 in) hole through the hinge base and the body pillar or door using the smaller hole as a pilot.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    Who should assist in removing the hinge for the 2003 GMC Savana 3500? Posted by Customer
    A:
    An assistant should help in removing the hinge.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the recommended preliminary torque for the bolts for the 2004 GMC Savana 3500? Posted by Customer
    A:
    Tighten the bolts to the recommended preliminary torque of 5 N.m (44 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the next step after marking the welds for the 2005 GMC Savana 2500? Posted by Customer
    A:
    Drill a 3 mm (1/8 in) pilot hole completely through the spot welds at each center punch mark.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the rear side door hinge for the 2000 GMC Savana 3500? Posted by Customer
    A:
    First, remove the door from the vehicle by following the procedures for Rear Door Replacement - Left Side or Rear Door Replacement - Right Side.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Hinge, Driver Side 15993231 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15993231 Hinge, Driver Side is available in the market under the name GM Door Hinge. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15993231 Hinge, Driver Side fits certain Chevrolet Express 1500, Express 2500, Express 3500 models, as well as GMC Savana 2500, Savana 3500, Savana 1500 models.
The original GM component designated by manufacturer part number 15993231 maintains top performance when functioning as the Hinge Kit, Door Hinge unit at its Driver Side. The component 15993231 is constructed from durable material and its dimensions span 7.0 x 4.4 x 4.4 inches while weighing 1.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Door Hinge. The part 15993231 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.