Make sure this part fits

GM 19120097
Hinge, Driver Side

1996-2024 GM

Customer Questions & Expert Answers (31)
GM 19120097 Hinge, Driver Side
  • Part Description
    Hinge Kit, Door Hinge
  • Position
    Driver Side
  • Replaces
    15993243
  • Manufacturer
    General Motors
Make sure this part fits
$120.75 MSRP: $172.78
You Save: $52.03 (31%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    1996-2014 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
    1996-2024 Chevrolet Express 2500Base, LS, LT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
    1996-2024 Chevrolet Express 3500Base, LS, LT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
    1996-1999 Chevrolet P30Base6 Cyl 4.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1996-2014 GMC Savana 1500Base, LS, LT, SLE, SLT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
    1996-2024 GMC Savana 2500Base, LS, LT, SLE, SLT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
    1996-2024 GMC Savana 3500Base, LS, LT, SLE, SLT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19120097 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19120097 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done to prepare for installation for the 2010 Chevrolet Express 2500? Posted by Customer
    A:
    Deburr the holes on the inside of the hinge pillar or door to ensure proper seating of the hinge and backing plate, and inspect the hinge seating zone for flatness.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you remove the upper and lower hinge pin bushings for the 2003 Chevrolet Express 3500? Posted by Customer
    A:
    Use a suitable tool to remove the upper hinge pin bushings from the door and the lower hinge pin bushings from the body.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What size hole should be drilled next for the 2011 Chevrolet Express 1500? Posted by Customer
    A:
    Drill a 13 mm (1/2 in) hole through the hinge base and the body pillar or door using the smaller hole as a pilot.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the initial torque specification for the bolts for the 2002 Chevrolet Express 2500? Posted by Customer
    A:
    Tighten the bolts to a preliminary torque of 5 N.m (44 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the required torque for tightening the screws for the 2007 Chevrolet Express 2500? Posted by Customer
    A:
    10 N.m (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What size holes should be drilled through the pillar for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Drill 13 mm (33/64 in) holes through the pillar using the pilot holes as a guide.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done for the forward most intermediate door (60 door) for the 2000 Chevrolet Express 3500? Posted by Customer
    A:
    Move the front seat forward to clear the B-pillar, then remove the door requiring hinge replacement.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after positioning the hinge for the 2005 Chevrolet Express 2500? Posted by Customer
    A:
    Loosely install the screws.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What size hole should be drilled next for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Drill a 13 mm (1/2 in) hole through the hinge base and the body pillar or door using the smaller hole as a pilot.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done before installing the new hinges for the 2008 Chevrolet Express 3500? Posted by Customer
    A:
    Paint the inner and outer surfaces of the hinge pillar or door at the hinge mounting zone, then coat the mating surface of the hinge with a medium-bodied sealer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    Who should assist in removing the screws and hinge for the 2006 Chevrolet Express 1500? Posted by Customer
    A:
    An assistant should help with removing the screws and taking off the hinge.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the final tightening torque for the door for the 2011 Chevrolet Express 2500? Posted by Customer
    A:
    Tighten to 25 Nm (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What size pilot hole should be drilled through the spot welds for the 2000 Chevrolet Express 3500? Posted by Customer
    A:
    Drill a 3 mm (1/8 in) pilot hole completely through the spot welds at each center punch mark.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you remove the lower hinge pin for the 2009 GMC Savana 1500? Posted by Customer
    A:
    Grasp the lower hinge pin with locking pliers and use a soft-faced hammer to drive it out.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you mark the hinge for removal for the 2010 GMC Savana 1500? Posted by Customer
    A:
    Mark the approximate centers of the mig welds on the hinge base.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the final torque specification for the bolts for the 2001 GMC Savana 3500? Posted by Customer
    A:
    Tighten the bolts to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be ensured during the reinstallation of the door for the 2000 GMC Savana 3500? Posted by Customer
    A:
    Ensure to follow the appropriate replacement procedures for either the left or right rear door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the next step after painting for the 2009 GMC Savana 2500? Posted by Customer
    A:
    Install the service hinge and backing plate, tightening to 23 Nm (17 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done to the bare surface of the pillar hinge mounting area for the 2011 GMC Savana 1500? Posted by Customer
    A:
    Paint it according to GM refinish specification GM 4901M-D-2000.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the rear door hinge for the 2003 GMC Savana 3500? Posted by Customer
    A:
    Ensure that both hinges on the same panel are replaced one at a time.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you drill the holes for the hinge for the 2004 GMC Savana 3500? Posted by Customer
    A:
    Drill a 3 mm (1/8 in) pilot hole completely through the spot welds at each center punch mark, then drill a 13 mm (1/2 in) hole through the hinge base and the body pillar or door using the smaller hole as a pilot.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done to the hinge mounting zone before installation for the 2005 GMC Savana 2500? Posted by Customer
    A:
    Paint the inner and outer surfaces of the hinge pillar or door at the hinge mounting zone, and coat the mating surface of the hinge with a medium-bodied sealer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you install the new hinge for the 2001 GMC Savana 2500? Posted by Customer
    A:
    Install the hinge to the body pillar or door using the bolts and tapping plate supplied with the service replacement kit.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How should the screws be installed during the hinge installation for the 2002 GMC Savana 3500? Posted by Customer
    A:
    Install the screws, tightening them to 10 N.m (89 In lb).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you prepare to remove the hinges for the 2006 GMC Savana 3500? Posted by Customer
    A:
    Drill a 3 mm (1/8 in) pilot hole completely through the spot welds at each center punch mark, then drill a 13 mm (1/2 in) hole through the hinge base and the body pillar or door using the smaller hole as a pilot.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done to prepare for installation for the 2007 GMC Savana 3500? Posted by Customer
    A:
    Deburr the holes on the inside of the hinge pillar or door and inspect the hinge seating zone for flatness.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should you do after installing the hinge for the 2004 GMC Savana 1500? Posted by Customer
    A:
    Install the door to the body, aligning it as required, and do not close the door completely until visually checking that the lock will correctly engage the striker.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you mark the hinge for removal for the 2003 GMC Savana 2500? Posted by Customer
    A:
    Mark the approximate centers of the mig welds on the hinge base.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after tightening the door for the 2009 GMC Savana 2500? Posted by Customer
    A:
    Apply sealer around the hinges and paint the hinge assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you drill holes through the pillar for the 2010 GMC Savana 3500? Posted by Customer
    A:
    Drill 13 mm (33/64 in) holes through the pillar using the pilot holes as a guide.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Hinge, Driver Side 19120097 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19120097 Hinge, Driver Side is available in the market under the name GM Door Hinge. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19120097 Hinge, Driver Side fits certain Chevrolet Express 1500, Express 2500, Express 3500 models, as well as GMC Savana 2500, Savana 3500, Savana 1500 models.
The original GM component designated by manufacturer part number 19120097 maintains top performance when functioning as the Hinge Kit, Door Hinge unit at its Driver Side. The component 19120097 is constructed from durable material and its dimensions span 9.1 x 5.0 x 3.1 inches while weighing 2.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Door Hinge. The part 19120097 has available replacement options 15993243. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.