Make sure this part fits

GM 26090950
Power Steering Pressure Hose

2003-2009 GM

Customer Questions & Expert Answers (11)
GM 26090950 Power Steering Pressure Hose
GM 26090950 Power Steering Pressure Hose
  • Part Description
    Hose, Steering Gear Oil Pressure; Power Steering Hose
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus8 Cyl 5.3 L GAS
    2003-2006 Chevrolet SSRBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2006-2009 Chevrolet TrailblazerBase, LS, LT, SS8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Chevrolet Trailblazer EXTLS, LT, North Face8 Cyl 5.3 L GAS
    2005-2009 GMC EnvoyDenali8 Cyl 5.3 L GAS
    2003-2006 GMC Envoy XLDenali, SLE, SLT8 Cyl 5.3 L GAS
    2004-2005 GMC Envoy XUVSLE, SLT8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26090950 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 26090950 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What are the steps for reinstalling the power steering hose assembly for the 2006 Buick Rainier? Posted by Customer
    A:
    Lower the vehicle and install the power steering hose assembly, tightening the frame brackets retaining bolts to 10 Nm (89 inch lbs.). Reinstall the hose assembly bracket and its retaining bolt, ensuring proper positioning of connectors in the lower fuse block before reassembling the upper fuse block and tightening its bolts to 6 Nm (53 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after raising it again for the power steering hoses for the 2007 Buick Rainier? Posted by Customer
    A:
    Install the power steering cooler hose and power steering pressure hose to the power steering pump, tightening the bolt to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the torque specification for tightening the frame brackets retaining bolts for the 2005 Buick Rainier? Posted by Customer
    A:
    Tighten to 10 Nm (89 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How should the hydraulic line be secured during installation for the 2005 Chevrolet SSR? Posted by Customer
    A:
    Secure it with the line clip and reinstall the wheelhouse liner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hydraulic Hose
    Q:
    What should be done after installing the power steering pressure hose retaining clip for the 2003 Chevrolet SSR? Posted by Customer
    A:
    Install the front bracket mounting bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the process for extracting the power steering hose assembly for the 2005 Chevrolet SSR? Posted by Customer
    A:
    Extract the power steering hose assembly from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done with the ECM after connecting the hoses for the 2008 Chevrolet Trailblazer? Posted by Customer
    A:
    Reinstall the ECM to the ECM mounting bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after removing the wheelhouse liner for the 2006 Chevrolet SSR? Posted by Customer
    A:
    Remove the line clip and the hydraulic line from the clutch concentric actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hydraulic Hose
    Q:
    What should be done to the power steering gear inlet and outlet ports for the 2008 GMC Envoy? Posted by Customer
    A:
    Clean them thoroughly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the torque specification for tightening the upper fuse block bolts for the 2009 GMC Envoy? Posted by Customer
    A:
    Tighten the upper fuse block bolts to 6 Nm (53 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Power Steering Pressure Hose 26090950 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 26090950 Power Steering Pressure Hose is available in the market under the name GM Hydraulic Hose, Power Steering Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 26090950 Power Steering Pressure Hose fits certain Chevrolet SSR, Trailblazer, Trailblazer EXT models, as well as GMC Envoy, Envoy XL, Envoy XUV. Additionally, it is compatible with Buick Rainier models.
The original GM component designated by manufacturer part number 26090950 maintains top performance when functioning as the Hose, Steering Gear Oil Pressure; Power Steering Hose unit. The component 26090950 is constructed from durable material and its dimensions span 31.7 x 17.0 x 3.2 inches while weighing 1.10 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Pressure Hose; Return Line; Hose, Steering Gear Oil Return. The part 26090950 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.