Make sure this part fits

GM 12553836
Intake Manifold

1996-2000 GM

Customer Questions & Expert Answers (10)
GM 12553836 Intake Manifold
  • Part Description
    Manifold, Engine Fuel Intake Manifold
  • Position
    Upper
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number12553836
    Part DescriptionManifold, Engine Fuel Intake Manifold
    Other NamesManifold
    Item Dimensions25.5 x 17.3 x 9.9 inches
    Item Weight18.60 Pounds
    PositionUpper
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU12553836
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1996-2000 Chevrolet C2500Base, Cheyenne, LS, Silverado, WT8 Cyl 7.4 L GAS
    1996-1999 Chevrolet C2500 SuburbanBase, LS, LT8 Cyl 7.4 L GAS
    1996-2000 Chevrolet C3500Base, Cheyenne, LS, Silverado8 Cyl 7.4 L GAS
    1996-2000 Chevrolet Express 3500Base, LS8 Cyl 7.4 L GAS
    1996-2000 Chevrolet K2500Base, Cheyenne, LS, Silverado, WT8 Cyl 7.4 L GAS
    1996-1999 Chevrolet K2500 SuburbanBase, LS, LT8 Cyl 7.4 L GAS
    1996-2000 Chevrolet K3500Base, Cheyenne, LS, Silverado8 Cyl 7.4 L GAS
    1996-2000 GMC C2500Sierra SL, Sierra SLE, Sierra SLT8 Cyl 7.4 L GAS
    1996-1999 GMC C2500 SuburbanBase, SLE, SLT8 Cyl 7.4 L GAS
    1996-2000 GMC C3500Sierra SL, Sierra SLE, Sierra SLT8 Cyl 7.4 L GAS
    View More
  • Customer Questions & Expert Answers

    Q:
    Is this 12553836 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12553836 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be reattached to the throttle shaft for the 2000 Chevrolet Express 3500? Posted by Customer
    A:
    Reattach the accelerator control cable and cruise control cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What final components need to be attached to the engine block for the 2000 Chevrolet K3500? Posted by Customer
    A:
    Attach the thermostat housing, MAP sensor, radiator hose, and distributor to the engine block.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What components need to be removed from the throttle body for the 2000 Chevrolet K3500? Posted by Customer
    A:
    The intake air resonator and the air cleaner intake duct.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be done with the PCV valve for the 2000 GMC C3500? Posted by Customer
    A:
    Remove the PCV valve.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What is the torque specification for the intake manifold bolts on the first pass for the 2000 GMC C2500? Posted by Customer
    A:
    Tighten them to 5 Nm (44 inch lbs.) on the first pass.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What is the next component to remove for the 2000 GMC C2500? Posted by Customer
    A:
    Take out the Evaporative Emission (EVAP) solenoid, including its bolt and isolator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    How can warpage be measured on the intake manifold for the 2000 GMC C2500? Posted by Customer
    A:
    Use a straight edge across the intake manifold cylinder head deck surface, positioning it over at least two runner port openings, and insert a feeler gauge.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What cables need to be removed from the throttle shaft for the 2000 GMC Savana 3500? Posted by Customer
    A:
    Remove the EVAP canister purge solenoid valve, the accelerator control cable, and the cruise control cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    Which components should be installed at the intake manifold for the 2000 GMC Savana 3500? Posted by Customer
    A:
    Install the fuel pipes, distributor, and PCV tube.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 12553836, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 12553836 Intake Manifold. It is sometimes referred to as GM Intake Manifold. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 12553836 Intake Manifold. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery