Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 89043622
Seat Cushion Pad

2005-2009 GM

Customer Questions & Expert Answers (13)
GM 89043622 Seat Cushion Pad
GM 89043622 Seat Cushion Pad
GM 89043622 Seat Cushion Pad
  • Part Description
    Pad Assembly, Driver Seat Cushion
  • Position
    Driver Side
  • Manufacturer
    General Motors
Make sure this part fits
$188.79 MSRP: $282.20
You Save: $93.41 (34%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • 89043622 Seat Cushion Pad is Ref No. 8 in the diagram below

    2007 Buick Rainier Seat Cushion Pad Diagram for 89043622
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 89043622

  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2005-2009 Chevrolet TrailblazerBase, LS, LT, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006 Chevrolet Trailblazer EXTLS, LT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2005-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2005-2006 GMC Envoy XLDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2005 GMC Envoy XUVSLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is 89043622 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 89043622 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the rear Seat Cushion Pad on Buick Rainier? Posted by Customer
    A:
    The first step to install the rear seat cushion in TrailBlazer, Envoy or Rainier involves removing two parts. Start with the removal of the rear seat bracket trim cover along with the hydraulic jack from the left-side jack stowage area. Above the 2 rear seat mounting nuts, position the seat cushion assembly so you can remove these nuts before taking out the seat cushion assembly from the vehicle. Pull the seat cushion assembly into the vehicle before attaching the 2 nuts to the floor panel while tightening them to 45 N.m (33 lb ft). Begin by putting the hydraulic jack back into the jack storage area of the left side while also applying the seat cushion to its latched position before placing on the rear mount trim cover.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Replace the Rear No. 1 Seat Cushion Pad and Cover on GMC Envoy? Posted by Customer
    A:
    The repair of rear seat cushion cover and pad for Trailblazer EXT and Envoy XL and Envoy XUV requires the J 36796 (Clip Removal Tool). Use J-strips to remove the seat cover from its fixture on the seat pan and carefully press the foam before slowly extracting the cover from the pan without pulling the adhesive strip off the pad. Start by disconnecting retaining strips which enables the cover removal from the cushion. The next step includes removing the cushion and cover assembly from the seat pan and opening the reinforcement bar from hog-rings. When installing the new cover begin by attaching it to the cushion followed by fastening the reinforcement bar to the hog-rings before added the retaining strips to secure the cover position. The installment process ends with the seat pan placement onto the cushion and cover assembly followed by foam compression then the seat cover and cushion reattachment to the seat pan before connecting the J-strips that maintain the cover positioning on the seat pan.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Replace a Rear Seat Cushion Pad and Cover on GMC Envoy? Posted by Customer
    A:
    First remove the vehicle seat cushion before removing the seat cushion bracket to change the rear seat cushion pad and cover. Before proceeding move on to remove the seat latch bezels while using the Clip Removal Tool (J 36796) to disconnect push pins beneath the seat bottom and begin the seat cushion extraction. You must expose the J-strips on the carpeted section to unfasten the seat cover from its seat pan position. The foam can be compressed beginning from any forward corner to partially disengage the seat cover assembly from the seat pan but you should avoid pulling adhesive-backed strip from the seat pad when separating seat cover retaining strips. You should separate the retaining strips to remove the cover followed by extracting the cushion and cover assembly off the seat pan. Once the reinforcement bar has been released from its hog-ring position you can detach the cover from both the cushion and the bar itself. Security begins by connecting the cover to the cushion before refitting the reinforcement bar to its place on the hog-rings and lastly applying the retaining strips which secure the cover to the cushion. Install the seat cushion to the seat pan by setting the seat pan over the cushion and cover assembly while slightly compressing the foam until you attach and position the seat cover and cushion on the seat pan. Plug in the J-strips which attach the cover to the seat pan and reinstall the push pins located underneath the seat bottom before installing the latch bezels. Reattach the seat cushion bracket before returning the upholstery to its appropriate position in the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you access the rear seat mounting nuts for the 2005 Buick Rainier? Posted by Customer
    A:
    Position the seat cushion assembly to access the 2 rear seat mounting nuts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What should be done after attaching the cover to the cushion for the 2007 Buick Rainier? Posted by Customer
    A:
    Attach the reinforcement bar to the hog-rings and secure the retaining strips.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    How many hog rings need to be removed from the seat cover for the 2006 Buick Rainier? Posted by Customer
    A:
    Remove 1 hog ring from the bottom rear side of the cover and 11 hog rings from the top side.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What needs to be engaged at the bottom of the seat back for the 2008 Chevrolet Trailblazer? Posted by Customer
    A:
    Engage the hook and loop retaining strips and the J-strips.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the final step regarding the head restraints for the 2009 GMC Envoy? Posted by Customer
    A:
    Reinstall the head restraints.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    How do you attach the cover flaps for the 2005 Chevrolet Trailblazer? Posted by Customer
    A:
    Attach the cover flaps to the pad using hog rings.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the first step to replace the rear seat cushion for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Remove the rear seat bracket trim cover and the hydraulic jack from the jack stowage area on the left side only.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    How do you complete the installation of the seat cover for the 2007 GMC Envoy? Posted by Customer
    A:
    Partially install the seat cover, then attach the 3 hog-rings to the reinforcement bar and complete the installation, engaging it with the hook and loop retaining strips.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    How do you access the rear seat mounting nuts for the 2008 GMC Envoy? Posted by Customer
    A:
    Position the seat cushion assembly to access the 2 rear seat mounting nuts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Seat Cushion Pad 89043622 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 89043622 Seat Cushion Pad is available in the market under the name GM Seat Cushion Pad. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 89043622 Seat Cushion Pad fits certain Chevrolet Trailblazer, Trailblazer EXT models, as well as GMC Envoy, Envoy XL, Envoy XUV. Additionally, it is compatible with Buick Rainier models.
The original GM component designated by manufacturer part number 89043622 maintains top performance when functioning as the Pad Assembly, Driver Seat Cushion unit at its Driver Side. The component 89043622 is constructed from durable material and its dimensions span 24.2 x 23.2 x 8.2 inches while weighing 21.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Pad, Seat Cushion; Seat Cushion. The part 89043622 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.