Make sure this part fits

GM 89043444
Seat Cushion Pad

2005-2009 GM

Customer Questions & Expert Answers (13)
GM 89043444 Seat Cushion Pad
  • Part Description
    Pad, Seat Cushion
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2005-2009 Chevrolet TrailblazerBase, LS, LT, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 89043444 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 89043444 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you access the rear seat mounting nuts for the 2007 Buick Rainier? Posted by Customer
    A:
    Position the seat cushion assembly to access the 2 rear seat mounting nuts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the first step in the installation process for the 2007 Buick Rainier? Posted by Customer
    A:
    Attach the cover to the cushion.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    How do you secure the seat module if equipped for the 2006 Buick Rainier? Posted by Customer
    A:
    Install the seat module and secure it with the retaining screw, tightening it to 5 N.m (44 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the first step to replace the rear No. 1 seat cushion for the 2005 Buick Rainier? Posted by Customer
    A:
    Remove the rear seat bracket trim cover and the hydraulic jack from the jack stowage area on the left side only.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    How do you finish the installation for the 2005 Chevrolet Trailblazer? Posted by Customer
    A:
    Attach the rear seat cushion assembly to the seat latch rod using the two bolts and tighten them to 11 N.m (97 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    How many push-pins need to be removed from the seat back for the 2009 GMC Envoy? Posted by Customer
    A:
    Remove 6 push-pins from the seat back.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What should be done after securing the seat cushion assembly for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Reinstall the hydraulic jack into the jack stowage area on the left side only.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    How do you remove the seat cover from the pad for the 2008 Chevrolet Trailblazer? Posted by Customer
    A:
    Release 3 hog-rings from the reinforcement bar and remove the seat cover from the pad.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the final step in the process for the 2008 GMC Envoy? Posted by Customer
    A:
    Adjust the seat cushion assembly to the latched position and install the rear mount trim cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the next step after removing the cover from the cushion for the 2005 GMC Envoy? Posted by Customer
    A:
    Detach the cushion and cover assembly from the seat pan and release the reinforcement bar from the hog-rings.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What needs to be done with the reinforcement bar for the 2009 GMC Envoy? Posted by Customer
    A:
    Release the reinforcement bar from the hog-rings and remove the cover from the cushion.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What should be done after installing the seat cover for the 2007 GMC Envoy? Posted by Customer
    A:
    Install the screw retaining the rear seat back release latch bezel, tightening it to 3 N.m (26 lb in), followed by the 3 push-pins at the bottom of the rear seat back.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Seat Cushion Pad 89043444 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 89043444 Seat Cushion Pad is available in the market under the name GM Seat Cushion Pad. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 89043444 Seat Cushion Pad fits certain Chevrolet Trailblazer models, as well as GMC Envoy. Additionally, it is compatible with Buick Rainier models.
The original GM component designated by manufacturer part number 89043444 maintains top performance when functioning as the Pad, Seat Cushion unit at its Rear. The component 89043444 is constructed from durable material while weighing 2.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Seat Cushion. The part 89043444 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.