Make sure this part fits

GM 12478697
Seat Back Pad, Driver Side

2000-2003 GM

Customer Questions & Expert Answers (13)
GM 12478697 Seat Back Pad, Driver Side
  • Part Description
    Pad, Driver Seat Back Cushion
  • Position
    Driver Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2003 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2000-2002 Chevrolet Suburban 1500Base, LS, LT, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2000-2002 Chevrolet Suburban 2500Base, LS, LT8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    2000-2003 Chevrolet TahoeBase, LS, LT, Z718 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2000-2003 GMC YukonDenali, SLE, SLT8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2000-2002 GMC Yukon XL 1500Denali, SLE, SLT8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2000-2002 GMC Yukon XL 2500SLE, SLT8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12478697 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12478697 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What can be used to facilitate the removal of the seat back cover for the 2002 Cadillac Escalade? Posted by Customer
    A:
    Insert a piece of cardboard between the seat back cover and the foam pad.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What should be removed after the seat for the 2003 Cadillac Escalade? Posted by Customer
    A:
    The headrests should be removed next.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the final step in the installation process for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Reconnect the electrical connectors and install the front nuts onto the studs on the underside of the cushion, tightening them to 21 N.m (15 lb ft), then install the front seat trim panel and re-zero the Inflatable Restraint Passenger Presence System.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What should be done after reattaching the seat back for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Install the rear passenger seat risers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the first step to replace the front seat back cushion cover and cushion pad for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Disable the air bag module if equipped with side air bags.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What needs to be removed to access the seat belt tower cover for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    Disengage the panel fasteners to remove the rear cardboard panel and unclip the head restraint retainers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the first step to replace the seat cushion trim cover and pad for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Begin by removing the seat trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the first step in the installation process for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Place the seat cushion back in position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the first step to replace the rear seat back cushion cover and pad in an Extended Cab for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    First, remove the rear seat from the vehicle and take out the headrests.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    How do you secure the front of the seat risers for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Push the seat forward in the rail to lock the front of the seat risers onto the pins inside the floor rail.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What should be done after installing the seat cushion cover for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Reconnect the rear heater connector if applicable, reinstall all J-clips, and finally, put the seat latch cover back in place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    How can you facilitate the removal of the seat back cover for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Insert a piece of cardboard between the seat back cover and the foam pad, then carefully lift the seat back cover from the foam pad, working from side to side.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Seat Back Pad, Driver Side 12478697 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12478697 Seat Back Pad, Driver Side is available in the market under the name GM Seat Cushion Pad. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12478697 Seat Back Pad, Driver Side fits certain Chevrolet Tahoe, Suburban 1500, Suburban 2500 models, as well as GMC Yukon, Yukon XL 1500, Yukon XL 2500. Additionally, it is compatible with Cadillac Escalade models.
The original GM component designated by manufacturer part number 12478697 maintains top performance when functioning as the Pad, Driver Seat Back Cushion unit at its Driver Side. The component 12478697 is constructed from durable material while weighing 1.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Pad, Ae7 - Front Split Bench (Except "D" Trim); Pad, Ae7 - Front Split Bench ("D" Trim). The part 12478697 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.