Make sure this part fits

GM 12473914
Seat Cushion Pad, Driver Side

2000-2003 GM

Customer Questions & Expert Answers (13)
GM 12473914 Seat Cushion Pad, Driver Side
GM 12473914 Seat Cushion Pad, Driver Side
  • Part Description
    Pad, Driver Seat Cushion
  • Position
    Driver Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2003 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2000-2002 Chevrolet Suburban 1500Base, LS, LT, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2000-2002 Chevrolet Suburban 2500Base, LS, LT8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    2000-2003 Chevrolet TahoeBase, LS, LT, Z718 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2000-2003 GMC YukonDenali, SLE, SLT8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2000-2002 GMC Yukon XL 1500Denali, SLE, SLT8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2000-2002 GMC Yukon XL 2500SLE, SLT8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12473914 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12473914 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after the head restraint retainers for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Insert the plastic pushpin into the side seat belt guide and connect the J-clips to the trim.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What follows the installation of the seat cushion heater element for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Install the Inflatable Restraint Passenger Presence System.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    How do you secure the seat back cover during installation for the 2002 Cadillac Escalade? Posted by Customer
    A:
    Engage the hook and loop strips that retain the seat back cover and the J-clips that secure it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the final step in the installation process for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    Install the seat trim panel, head restraints, and push on the seat cover to ensure it is retained by the velcro in the seat cushion. Finally, connect the J-strip at the bottom of the seat and enable the air bag module if equipped.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the procedure for fitting the seat cover for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Fit the seat cover around the air bag cover, pull the seat belt down through the cushion, and install the outboard seat belt anchor nut, tightening it to 53 N.m (39 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What should be done if the seat cushion has a heater element for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    If equipped, take out the seat cushion heater element.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the next step after securing the seat cushion cover for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Reattach the seat back to the seat cushion.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    How do you remove the seat for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Pull up on the handle at the rear of the seat, roll the seat forward, and lift it up and out of the floor rails.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the final step in the installation process for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Secure the 6-way power seat switch panel with screws and reinstall the seat into the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    How should the side bolts be installed for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Install the side bolts and tighten them to 35 N.m (26 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What should be done if it is equipped with a rear heater for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Disconnect the rear heater connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What should be done after removing the armrest and head restraints for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Next, release the bottom edge of the seat back cover and detach the hook and loop strips that hold the seat back cover to the seat back foam pad.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Seat Cushion Pad, Driver Side 12473914 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12473914 Seat Cushion Pad, Driver Side is available in the market under the name GM Seat Cushion Pad. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12473914 Seat Cushion Pad, Driver Side fits certain Chevrolet Tahoe, Suburban 1500, Suburban 2500 models, as well as GMC Yukon, Yukon XL 1500, Yukon XL 2500. Additionally, it is compatible with Cadillac Escalade models.
The original GM component designated by manufacturer part number 12473914 maintains top performance when functioning as the Pad, Driver Seat Cushion unit at its Driver Side. The component 12473914 is constructed from durable material and its dimensions span 26.9 x 23.4 x 8.9 inches while weighing 2.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Pad, Seat Cushion; Seat Cushion. The part 12473914 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.