Make sure this part fits

GM 89047824
Brake Pads

2001-2007 GM

Customer Questions & Expert Answers (11)
GM 89047824 Brake Pads
GM 89047824 Brake Pads
  • Part Description
    Pad Kit, Front Disc Brake; Disc Brake Hardware Kit
  • Position
    Front
  • Replaces
    10434258
  • Manufacturer
    General Motors
Make sure this part fits
$28.67 MSRP: $78.53
You Save: $49.86 (64%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number89047824
    Part DescriptionPad Kit, Front Disc Brake; Disc Brake Hardware Kit
    Other NamesFront Pads; Pad Kit, Brake
    Item Dimensions7.7 x 4.4 x 4.3 inches
    Item Weight5.30 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces10434258
    ManufacturerGeneral Motors
    SKU89047824
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2007 Buick RendezvousCX, CX Plus, CXL, CXL Plus, Ultra6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
    2002-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    2002-2004 Oldsmobile SilhouetteGL, GLS, Premiere6 Cyl 3.4 L GAS
    2001-2005 Pontiac AztekBase, GT, Rally6 Cyl 3.4 L GAS
    2002-2005 Pontiac MontanaBase6 Cyl 3.4 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is 89047824 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 89047824 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the brake pads for the 2007 Buick Rendezvous? Posted by Customer
    A:
    Use a C-clamp to compress the piston completely into the bore, then remove the C-clamp.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be done after using the C-clamp for the 2006 Buick Rendezvous? Posted by Customer
    A:
    Remove the C-clamp, then take out the lower brake caliper bolt and rotate the caliper upward to access the brake pads.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be done before moving for the 2002 Buick Rendezvous? Posted by Customer
    A:
    Ensure a firm brake pedal is obtained by pumping the brake pedal as needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be inspected during the process for the 2007 Buick Rendezvous? Posted by Customer
    A:
    Inspect the disc brake mounting and hardware, as well as the caliper dust boot for any damage, and replace any damaged parts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What is the correct positioning for the wear sensor when installing new pads for the 2003 Buick Rendezvous? Posted by Customer
    A:
    Ensure the wear sensor is positioned at the leading edge of the inner pad.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What is the final step in the process for the 2005 Buick Rendezvous? Posted by Customer
    A:
    Fill the brake master cylinder reservoir to the proper level and burnish the pads and rotors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    Why is burnishing the brake pads and rotors important for the 2002 Chevrolet Venture? Posted by Customer
    A:
    It is essential to ensure the braking surfaces are properly prepared after servicing the disc brake system, especially when the rotors have been refinished or replaced, or when the brake pads have been replaced.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be done to prevent damage when pushing the piston back for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Insert a block of wood or the old brake pad between the C-clamp and the brake caliper piston.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What are the final steps after securing the caliper for the 2004 Chevrolet Venture? Posted by Customer
    A:
    Remove the wheel nuts, install the tire and wheel, lower the vehicle, and fill the master cylinder with clean brake fluid.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    How do you secure the caliper after installing the new brake pads for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Swing the caliper upward and support it with heavy gauge wire, then lubricate the bolt and install the upper caliper bolt, tightening it to 45 Nm (33 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 89047824, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 89047824 Brake Pads. It is sometimes referred to as GM Brake Pad. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 89047824 Brake Pads. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery