Make sure this part fits

GM 19133714
Reservoir

2004-2011 GM

Customer Questions & Expert Answers (10)
GM 19133714 Reservoir
GM 19133714 Reservoir
  • Part Description
    Reservoir, Steering Pump; Power Steering Reservoir
  • Replaces
    88964535, 88957185
  • Manufacturer
    General Motors
Make sure this part fits
$87.90 MSRP: $137.68
You Save: $49.78 (37%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number19133714
    Part DescriptionReservoir, Steering Pump; Power Steering Reservoir
    Item Dimensions9.1 x 8.9 x 7.1 inches
    Item Weight3.30 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces88964535, 88957185
    ManufacturerGeneral Motors
    SKU19133714
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2009 Cadillac SRXBase6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
    2005-2011 Cadillac STSBase, Platinum, V6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 19133714 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19133714 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Replace the Power Steering Reservoir (LH2) on Cadillac STS? Posted by Customer
    A:
    The first step to change the Remote Power Steering Reservoir (LH2) requires uninstalling the air cleaner intake duct and front air deflector before placing a drain pan under the vehicle. First disconnect both the power steering cooler hose along with the outlet hose from the power steering reservoir before removing the retaining nuts to take out the reservoir. The installation process begins by placing the new power steering reservoir correctly before securing it with retaining nuts which need to be tightened to 9 Nm (80 inch lbs.) according to Service Precautions Fastener Notice. You must first install the power steering reservoir by connecting outlet and cooler hoses to its openings then take away the drain pan and reinstall the air cleaner intake duct before bleeding power steering and securing the front air deflector.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Replace the Power Steering Reservoir (LY7) on Cadillac SRX? Posted by Customer
    A:
    The first step to replace Remote Power Steering Reservoir (LY7) involves un-mounting the air cleaner intake duct along with the front air deflector before positioning a drain pan beneath the vehicle. To remove the power steering reservoir from the vehicle first disconnect both the power steering cooler hose and power steering reservoir outlet hose from the reservoir then remove retaining bolts to extract the reservoir from its location. Place the power steering reservoir into its vehicle position while installing the retaining bolts at 9 Nm (80 inch lbs.). Afterward connect the reservoir to the power steering outlet hose along with the power steering cooler hose and remove the drain pan. The air cleaner intake duct must be installed followed by power steering system bleeding then completion with the front air deflector.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Replace the Power Steering Reservoir (LH2) on Cadillac SRX? Posted by Customer
    A:
    A proper replacement of the Remote Power Steering Reservoir (LH2) begins by emptying the existing fluid from the reservoir. The first step involves removing the front air deflector then placing a drain pan below the vehicle. The first step involves disconnecting both the power steering cooler hose along with the outlet hose from the power steering reservoir before removing the retaining nuts to extract the reservoir out of the vehicle. Place the new power steering reservoir into position before installing its retaining nuts while tightening them to 9 N.m (80 lb in). After reattaching the outlet hose and the cooler hose to the reservoir you should remove the drain pan to clean away any spilled fluids. To finish the replacement process you should install the air cleaner intake duct followed by bleaching the power steering system before returning the front air deflector.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the Remote Power Steering Fluid Reservoir (LY7) for the 2007 Cadillac STS? Posted by Customer
    A:
    First, remove the fuel injector sight shield and the front air deflector, then place a drain pan under the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Reservoir
    Q:
    What should be done last in the process for the 2009 Cadillac STS? Posted by Customer
    A:
    Finally, reinstall the front air deflector and the fuel injector sight shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Reservoir
    Q:
    What is the first step to replace the power steering fluid reservoir on a V6 engine for the 2010 Cadillac STS? Posted by Customer
    A:
    First, remove the fuel injector sight shield and the front air deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Reservoir
    Q:
    What is the final step after reconnecting the hoses for the 2008 Cadillac STS? Posted by Customer
    A:
    Bleed the power steering system and reinstall the front air deflector and the fuel injector sight shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Reservoir
    Q:
    What is the next step after disconnecting the hoses for the 2008 Cadillac SRX? Posted by Customer
    A:
    Remove the bolts securing the reservoir and take it out of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Reservoir
    Q:
    What is the next step after disconnecting the hoses for the 2009 Cadillac SRX? Posted by Customer
    A:
    Remove the bolts securing the reservoir and take it out of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Reservoir
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 19133714, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 19133714 Reservoir. It is sometimes referred to as GM Power Steering Reservoir. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 19133714 Reservoir. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Cadillac parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery