Make sure this part fits

GM 15047057
Upper Seal

2002-2009 GM

Customer Questions & Expert Answers (23)
GM 15047057 Upper Seal
  • Part Description
    Seal, Windshield
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 Chevrolet TrailblazerBase, LS, LT, LTZ, North Face, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Trailblazer EXTLS, LT, North Face6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2006 GMC Envoy XLDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004-2005 GMC Envoy XUVSLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15047057 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15047057 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step for installation of the new mid gate weatherstrip for the 2004 Buick Rainier? Posted by Customer
    A:
    Position the new mid gate weatherstrip onto the vehicle and secure it by installing the pushpins to the body.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new midgate weatherstrip for the 2005 Buick Rainier? Posted by Customer
    A:
    Position the new midgate weatherstrip onto the vehicle and install the midgate weatherstrip mold by inserting the push-pins.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the sealing strip for the 2006 Buick Rainier? Posted by Customer
    A:
    Lift upward on the rear edge of the sealing strip and remove it from the pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the sunroof window weatherstrip for the 2007 Buick Rainier? Posted by Customer
    A:
    First, remove the sunroof window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after detaching the lower molds for the 2004 Buick Rainier? Posted by Customer
    A:
    Detach the weatherstrip from the end gate opening flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    Is there any additional step that may be necessary to complete the installation for the 2003 Chevrolet Trailblazer? Posted by Customer
    A:
    Yes, spooning of the weatherstrip may be necessary to complete the installation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    Where should the butt joint seam be installed for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Install the butt joint seam at the center of the bottom pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the auxiliary front door weatherstrip for the 2006 Chevrolet Trailblazer? Posted by Customer
    A:
    Open the side doors on either the right or left side.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after removing the rear hood seal for the 2004 Chevrolet Trailblazer? Posted by Customer
    A:
    Take the seal off the air inlet grille panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step in the process for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Reinstall the push pin retainers to the front door sealing weatherstrip at the base of the pillar and close the doors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be removed from the front door sealing weatherstrip for the 2003 GMC Envoy? Posted by Customer
    A:
    Remove the push pin retainers from the front door sealing weatherstrip at the base of the pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after removing the old seal for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Position the new seal onto the inlet grille panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after aligning the weatherstrip for the 2005 Chevrolet Trailblazer? Posted by Customer
    A:
    Install the weatherstrip onto the pinch-weld flange, ensuring it is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new endgate weatherstrip for the 2005 GMC Envoy? Posted by Customer
    A:
    First, attach the endgate weatherstrip upper molds to the roof module using the integral push-pins.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step in the installation process for the 2002 GMC Envoy? Posted by Customer
    A:
    Reinstall the screw to secure the sealing strip to the door, tightening it to 1.2 N.m (10 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the front door window glass weatherstrip for the 2004 GMC Envoy? Posted by Customer
    A:
    Begin by removing the front door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after removing the front door sill plate for the 2007 GMC Envoy? Posted by Customer
    A:
    Take off the weatherstrip from the pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after removing the push pin retainers for the 2008 GMC Envoy? Posted by Customer
    A:
    Pull back the front door sealing weatherstrip to expose the weatherstrip side retainer screws.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    Is there anything else that may be necessary to complete the installation for the 2006 GMC Envoy? Posted by Customer
    A:
    Spooning of the weatherstrip may be necessary to complete the installation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new liftgate weatherstrip for the 2009 GMC Envoy? Posted by Customer
    A:
    Start at the top center of the liftgate opening, position it to the pinch-weld flange, and work down both the right and left sides towards the bottom center, ensuring not to stretch the weatherstrip during installation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the upper molded detail for the 2004 GMC Envoy? Posted by Customer
    A:
    Install it to the front of the rear side access door using the integral retaining pins.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after removing the sunroof window for the 2008 Chevrolet Trailblazer? Posted by Customer
    A:
    Carefully take off the sunroof window weatherstrip from the perimeter of the sunroof window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Upper Seal 15047057 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15047057 Upper Seal is available in the market under the name GM Weather Strip. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15047057 Upper Seal fits certain Chevrolet Trailblazer, Trailblazer EXT models, as well as GMC Envoy, Envoy XL, Envoy XUV. Additionally, it is compatible with Buick Rainier and Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 15047057 maintains top performance when functioning as the Seal, Windshield unit. The component 15047057 is constructed from durable material and its dimensions span 59.0 x 6.9 x 1.2 inches while weighing 2.10 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Seal. The part 15047057 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.