Make sure this part fits

GM 15136069
Belt Weatherstrip, Rear Outer Driver Side

2000-2007 GM

Customer Questions & Expert Answers (30)
GM 15136069 Belt Weatherstrip, Rear Outer Driver Side
GM 15136069 Belt Weatherstrip, Rear Outer Driver Side
  • Part Description
    Sealing Strip Assembly-Rear Side Door Window Outer; Door Moldings; Weatherstrip
  • Position
    Rear Outer Driver Side
  • Replaces
    15761645, 15752301, 15104012, 15705601
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2001-2007 Chevrolet Silverado 1500Base, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicLS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2001-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2001-2007 Chevrolet Silverado 2500 HDBase, LS, LT, LTZ, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15136069 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15136069 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How should the existing weatherstrip be removed for the 2006 Cadillac Escalade EXT? Posted by Customer
    A:
    Start from one end and remove the existing weatherstrip from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the new weatherstrip be installed for the 2005 Cadillac Escalade EXT? Posted by Customer
    A:
    Begin installing the weatherstrip from one end, ensuring the corners are fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after removing the necessary components for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Peel the weatherstrip from the rear side door opening away from the channel, pulling it from the pinchweld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done before installing the new weatherstrip for the 2005 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Ensure the area is clean and free of foreign material.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you ensure before installing the new weatherstrip for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    The area should be clean and free of foreign material.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What temperature should the weatherstrip be at before installation for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    A minimum of 21°C (70°F).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the temperature requirement for the new weatherstrip during installation for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    It should be at a minimum of 21°C (70°F).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step in the process for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Close the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after removing the water deflector for the 2005 Chevrolet Silverado 1500? Posted by Customer
    A:
    Take out the window and remove the screws.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new weatherstrip for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Place the new weatherstrip in the same locations: the front of the glass run channel, the top of the window frame flange, and the rear of the glass run channel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the rear door weatherstrip for the 2003 Chevrolet Suburban 1500? Posted by Customer
    A:
    Open the door and use the Door Trim Pad Clip Remover (J 38778) to remove the weatherstrip from the mounting surface.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the new weatherstrip be aligned during installation for the 2007 Chevrolet Silverado 1500? Posted by Customer
    A:
    Align the new weatherstrip to the door opening, ensuring the two dots are positioned on the upper right and left sides, and the bond joint is at the lower center of the door opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step in the installation of the new sealing strip for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Hook the rear end of the new sealing strip into the window run channel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be removed after the sill plate for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    The hinge pillar trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after removing the trim pieces for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    Take out the weatherstrip from the rear side door opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step in the process for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Close the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you begin removing the weatherstrip for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Start removing the weatherstrip from one end of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after installing the new weatherstrip for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Close the endgate and inspect for any interference.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be removed after the door trim panel for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Remove the water deflector and the window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after removing the old rear hood seal for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Next, align the slot in the rear hood seal with the cowl pinch-weld flange and press it into place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    Where should the new weatherstrip be placed during installation for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Place the new weatherstrip in the same locations: the front of the glass run channel, the top of the window frame flange, and the rear of the glass run channel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after installing the weatherstrip for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Reinstall the sunroof window to the sunroof module assembly and verify that there are no air or water leaks.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after removing the old weatherstrip for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Position the new weatherstrip into the rear side door opening, ensuring it is fully seated in the pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What are the final steps after installing the weatherstrip for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Reinstall the window, the water deflector, and the door trim panel, and finally, inspect the operation of the window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step in the process for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Reinstall the front door sill plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    Where should the bond joint be positioned during installation for the 2007 GMC Sierra 1500? Posted by Customer
    A:
    The bond joint should be at the lower center of the door opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you start replacing the rear hood seal for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    First, pull up on the rear hood seal and remove it from the cowl pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after removing the trim panels for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Take out the weatherstrip from the door opening flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be reinstalled after the new weatherstrip is in place for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Reinstall the windshield pillar molding, hinge pillar trim panel, and sill plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Belt Weatherstrip, Rear Outer Driver Side 15136069 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15136069 Belt Weatherstrip, Rear Outer Driver Side is available in the market under the name GM Weather Strip. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15136069 Belt Weatherstrip, Rear Outer Driver Side fits certain Chevrolet Silverado 1500, Silverado 2500 HD, Silverado 2500 models, as well as GMC Sierra 1500, Sierra 2500 HD, Sierra 2500. Additionally, it is compatible with Cadillac Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 15136069 maintains top performance when functioning as the Sealing Strip Assembly-Rear Side Door Window Outer; Door Moldings; Weatherstrip unit at its Rear Outer Driver Side. The component 15136069 is constructed from durable material and its dimensions span 33.8 x 4.2 x 0.7 inches while weighing 0.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Sealing Strip, Side Door Window Glass. The part 15136069 has available replacement options 15761645, 15752301, 15104012, 15705601. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.