Make sure this part fits

GM 15001401
Splash Shield, Passenger Side

2002-2009 GM

Customer Questions & Expert Answers (7)
GM 15001401 Splash Shield, Passenger Side
GM 15001401 Splash Shield, Passenger Side
  • Part Description
    Shield, Brake Flange Plate; Brake Dust Shield
  • Position
    Passenger Side
  • Manufacturer
    General Motors
Make sure this part fits
$105.40 MSRP: $198.01
You Save: $92.61 (47%)
Ships in 1 Business Day
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number15001401
    Part DescriptionShield, Brake Flange Plate; Brake Dust Shield
    Other NamesDust Shield
    Item Dimensions9.5 x 13.3 x 1.0 inches
    Item Weight1.30 Pounds
    PositionPassenger Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU15001401
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS
    2002-2009 Chevrolet TrailblazerBase, LS, LT, LTZ, North Face6 Cyl 4.2 L GAS
    2002-2009 GMC EnvoySLE, SLT6 Cyl 4.2 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 15001401 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15001401 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front disc brake dust shields on Buick Rainier? Posted by Customer
    A:
    Start the replacement process by lifting the vehicle and taking out the wheel combo. First you should take out the hub and bearing assembly before removing the retaining bolts from the dust shields then removing the shields themselves. Install the replacement dust shields by positioning them correctly then fastening them with the retaining bolts in the same manner as you tightened the wheel hub and bearing. Put back the front hub and bearing assembly then connect the tire and wheel elements before lowering the vehicle. Keep safety standards during brake dust handling during these tasks.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the drum brake backing plate on GMC Envoy? Posted by Customer
    A:
    To install to replace the drum Brake Backing Plate, raise the vehicle and remove the park brake cable; for the left cable, it is park brake cable replacement - front, and for the right, park brake cable replacement - left rear. Remove the Wheel Cylinder and the rear Axle Shaft, as well as the backing plate mounting bolts to pull off the backing plate. Install the backing plate mounting bolts to the rear axle housing and follow the fastener notice in service precautions. Position the backing plate on the rear axle housing. Apply 135 nm (100 ft. Lbs.) of torque to the mounting bolts and attach the backing plate retaining bolts. Install the Wheel Cylinder and the park brake cables once more, with the relevant replacements for the left and the right cables. Finally install rear Axle Shaft and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after removing the rear drive axle for the 2005 Buick Rainier? Posted by Customer
    A:
    Remove the retaining nuts from the backing plate and then take the backing plate off the rear axle housing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    How should the backing plate be secured for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Secure it with the backing plate nuts, tightening them to 135 Nm (100 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What is the next step after removing the front hub and bearing assembly for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Remove the retaining bolts for the splash shield, and then remove the splash shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    Q:
    What should be done after removing the tire and wheel assembly for the 2006 GMC Envoy? Posted by Customer
    A:
    Take out the front hub and bearing assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 15001401, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 15001401 Splash Shield, Passenger Side. It is sometimes referred to as GM Brake Backing Plate, GM Brake Dust Shields. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 15001401 Splash Shield, Passenger Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery