Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 12450166
Switch, Driver Side

1999-2007 GM

Customer Questions & Expert Answers (22)
GM 12450166 Switch, Driver Side
GM 12450166 Switch, Driver Side
GM 12450166 Switch, Driver Side
GM 12450166 Switch, Driver Side
  • Part Description
    Switch, Seat Adjuster/Recliner; Power Seat Switch
  • Position
    Driver Side
  • Manufacturer
    General Motors
Make sure this part fits
$157.03 MSRP: $234.71
You Save: $77.68 (34%)
Ships in 1-3 Business Days
1
ADD TO CART
  • 2005 Hummer H2 Switch, Driver Side Diagram for 12450166
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 12450166

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    1999-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    1999-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 12450166 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12450166 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to perform a Seat Switch replacement for the lumbar on Chevrolet Avalanche 2500? Posted by Customer
    A:
    One must first remove the power seat switch bezel from the seat before unscrewing the lumbar switch from its bezel to take out the switch. Insert the new lumbar switch onto the power seat switch bezel while observing the Fastener Notice in Service Precautions and fasten it using screws tightened to 2 N.m (18 lb in). Position the power seat switch bezel back onto the seat as the last step.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to perform a Seat Switch replacement for the lumbar in a power seat on Chevrolet Avalanche 1500? Posted by Customer
    A:
    The initial step to replace the lumbar switch requires a removal of the power seat switch bezel from the seat position. Start by removing the lumbar switch screws from the power seat switch bezel and after that put off the lumbar switch. Place the lumbar switch on the power seat switch bezel and use screws to fix it in place by tighting them to 2 N.m (18 lb in). The last step involves properly putting back the power seat switch bezel on the seat.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to perform a Seat Switch replacement for the Driver Seat Adjuster Memory on Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Starting the replacement of the Driver Seat Adjuster Memory Switch requires removal of the front door trim panel first. Begin with disconnecting the electrical connector after which you must release the retaining clips of the front seat memory switch assembly. The front seat memory switch assembly requires pressing into the front trim panel until it reaches complete seating before reconnecting its electrical connector and reinstalling the front trim panel.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the memory seat switch on Chevrolet Silverado 3500? Posted by Customer
    A:
    The replacement process for the memory seat switch starts with front door trim panel detachment while disconnecting its electrical connector. The process starts by unfastening the clips securing the front seat memory switch assembly and proceeding to remove the switch after taking out the front seat memory switch assembly. The installation process should begin with pressing the front seat memory switch assembly into the front trim panel until complete seating occurs followed by electrical connector connection to the assembly then finishing installation with the front trim panel.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the power seat switch on Chevrolet Silverado 1500? Posted by Customer
    A:
    The replacement begins by taking out the power seat switch bezel from the seat then proceeding to unfasten the screws connecting the power seat switch to the bezel. The new power seat switch installation begins by attaching it with screws while achieving 2 N.m (18 lb in) torque followed by reinstalling the power seat switch bezel onto the seat.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to perform a Seat Switch replacement for the lumbar in a power seat on GMC Sierra 1500 Classic? Posted by Customer
    A:
    The replacement process for the lumbar switch begins with the removal of the power seat switch bezel that contains both the lumbar switch and its bezel from the seat. Unscrew all lumbar switch screws that secure the power seat switch bezel before separating it from the seat. Mount the lumbar switch to the power seat switch bezel before securing its screws by tightening them to 2 N.m (18 lb in). The last step involves placing the power seat switch bezel back onto the seat.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to perform a Seat Switch replacement for the lumbar in a power seat on GMC Yukon XL 2500? Posted by Customer
    A:
    The lumbar switch replacement process begins by taking out the power seat switch bezel component from the seat. Start by removing the lumbar switch screws that exist in the bezel before finally removing the lumbar switch. Installation of a lumbar switch requires the operation to be done by placing the switch onto the power seat switch bezel while strictly following the Fastener Notice in Service Precautions. Affix the lumbar switch through screws while tightening them to 2 N.m (18 lb in). Then integrate the power seat switch bezel back onto the seat.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the memory seat switch for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Begin by removing the front door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What is the next step after removing the switch for the 2005 Cadillac Escalade EXT? Posted by Customer
    A:
    Take out the front seat memory switch assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What is the next step after removing the switch for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Take out the front seat memory switch assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What should be done after removing the bezel for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Remove the screws securing the power seat switch to the bezel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What should be done after securing the power seat switch for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Attach the power seat switch bezel back to the seat.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What do you do after removing the front door trim panel for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Release the retaining clips of the front seat memory switch assembly to remove the switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    How much torque should be applied to the screws during installation for the 2003 Chevrolet Suburban 1500? Posted by Customer
    A:
    Tighten them to 2 N.m (18 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    How much should the screws be tightened for the 2002 Chevrolet Tahoe? Posted by Customer
    A:
    Tighten them to 2 N.m (18 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What is the next step after removing the power seat switch for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Install the power seat switch to bezel screws, tightening them to 2 N.m (18 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    How do you install the new lumbar switch for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Place the lumbar switch back into the power seat switch bezel, ensuring to follow the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What is the first step to replace the lumbar switch for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    First, remove the power seat switch bezel from the seat.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    How do you secure the lumbar switch for the 2004 GMC Yukon? Posted by Customer
    A:
    Secure the lumbar switch with screws, tightening them to 2 N.m (18 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What is the first step to replace the memory seat switch for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Remove the front door trim panel and disconnect the electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What is the next step after removing the switch for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Take out the front seat memory switch assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Switch, Driver Side 12450166 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12450166 Switch, Driver Side is available in the market under the name GM Seat Switch. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12450166 Switch, Driver Side fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT and Hummer H2 models.
The original GM component designated by manufacturer part number 12450166 maintains top performance when functioning as the Switch, Seat Adjuster/Recliner; Power Seat Switch unit at its Driver Side. The component 12450166 is constructed from durable material and its dimensions span 6.0 x 3.7 x 2.3 inches while weighing 0.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 12450166 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.