Make sure this part fits

GM 12473558
Switch

1999-2007 GM

Customer Questions & Expert Answers (22)
GM 12473558 Switch
GM 12473558 Switch
  • Part Description
    Switch, Seat Adjuster/Recliner; Power Seat Switch
  • Position
    Driver Side
  • Manufacturer
    General Motors
Make sure this part fits
$112.55 MSRP: $168.23
You Save: $55.68 (34%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    1999-2007 Chevrolet Silverado 1500Base, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicLS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    1999-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12473558 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12473558 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the front door trim panel for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Disconnect the electrical connector and release the retaining clips of the front seat memory switch assembly to remove the switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What do you do after removing the front door trim panel for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Next, release the retaining clips of the front seat memory switch assembly to remove the switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What should you do after seating the memory switch assembly for the 2005 Cadillac Escalade EXT? Posted by Customer
    A:
    Connect the electrical connector to the assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What should be done after removing the bezel for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Take out the screws securing the lumbar switch to the bezel and remove the lumbar switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What is the next step after removing the power seat switch for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Tighten the screws to 2 N.m (18 lb in) to secure the power seat switch to the bezel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What is the final step if the lumbar knob was removed for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Reinstall the lumbar knob.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What is the final step after installing the lumbar switch for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Reinstall the power seat switch bezel onto the seat.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What is the next step after removing the screws for the 2003 Chevrolet Suburban 1500? Posted by Customer
    A:
    Take out the power seat switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What should you do after seating the memory switch assembly for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Connect the electrical connector to the assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What should you do after seating the memory switch assembly for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Connect the electrical connector to the assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    How do you install the new driver seat adjuster memory switch for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Press the front seat memory switch assembly into the front trim panel until it is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What is the next step after removing the power seat switch for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Install the power seat switch to bezel screws, tightening them to 2 N.m (18 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What should be done after removing the bezel for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Take out the screws securing the lumbar switch from the bezel and remove the switch itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What should be done after removing the bezel for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Remove the screws securing the power seat switch to the bezel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What should be done after removing the power seat switch bezel for the 2004 GMC Yukon? Posted by Customer
    A:
    Take out the lumbar switch screws from the bezel and then remove the lumbar switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What should be done if the lumbar knob was removed for the 2002 Chevrolet Tahoe? Posted by Customer
    A:
    Reinstall the lumbar knob.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    How do you install the new lumbar switch for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Place the lumbar switch back into the power seat switch bezel, ensuring to follow the Fastener Notice.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    How do you install the new memory seat switch for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Press the front seat memory switch assembly into the front trim panel until it is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What is the final step in the installation process for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Install the front trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    How do you secure the lumbar switch for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Secure the lumbar switch with screws, tightening them to 2 N.m (18 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What should be done after removing the bezel for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Next, take out the lumbar switch screws from the power seat switch bezel and then remove the lumbar switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Switch 12473558 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12473558 Switch is available in the market under the name GM Seat Switch. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12473558 Switch fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT and Hummer H2 models.
The original GM component designated by manufacturer part number 12473558 maintains top performance when functioning as the Switch, Seat Adjuster/Recliner; Power Seat Switch unit at its Driver Side. The component 12473558 is constructed from durable material and its dimensions span 3.3 x 2.2 x 2.8 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 12473558 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.