Make sure this part fits

GM 25830971
Weatherstrip

2002-2009 GM

Customer Questions & Expert Answers (23)
GM 25830971 Weatherstrip
  • Part Description
    Weatherstrip Assembly-Lift Gate Window
  • Replaces
    15079567, 15159194, 15181271, 15194242, 15917733
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 Chevrolet TrailblazerBase, LS, LT, LTZ, North Face, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25830971 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25830971 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step in the process for the 2004 Buick Rainier? Posted by Customer
    A:
    Close the moveable roof and the end gate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new weatherstrip for the 2007 Buick Rainier? Posted by Customer
    A:
    Carefully place the new weatherstrip onto the perimeter of the sunroof window, ensuring it is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the process for pressing the weatherstrip into place for the 2004 Buick Rainier? Posted by Customer
    A:
    Press the weatherstrip into the mid gate window channel starting at the alignment locations and working around.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you align the weatherstrip during installation for the 2005 Buick Rainier? Posted by Customer
    A:
    Align the paint dots on the weatherstrip with the sheet metal joints of the window channel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you ensure the new sealing strip is properly installed for the 2006 Buick Rainier? Posted by Customer
    A:
    Ensure it is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after removing the sunroof window for the 2008 Chevrolet Trailblazer? Posted by Customer
    A:
    Carefully take off the sunroof window weatherstrip from the perimeter of the sunroof window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be ensured during the installation of the weatherstrip for the 2003 Chevrolet Trailblazer? Posted by Customer
    A:
    Ensure not to stretch the weatherstrip during installation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What tool can be used to ensure full engagement of the weatherstrip for the 2006 GMC Envoy? Posted by Customer
    A:
    Use a rubber mallet to ensure full engagement of the weatherstrip to the pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after installing the new seal for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Close the hood.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after aligning the weatherstrip for the 2004 GMC Envoy? Posted by Customer
    A:
    Firmly seat the weatherstrip into the front door window channel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after installing the new seal for the 2004 Chevrolet Trailblazer? Posted by Customer
    A:
    Close the hood.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after removing the sill plate for the 2005 Chevrolet Trailblazer? Posted by Customer
    A:
    Take off the weatherstrip from the pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step in the installation process for the 2002 GMC Envoy? Posted by Customer
    A:
    Reinstall the screw to secure the sealing strip to the door, tightening it to 1.2 N.m (10 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    Where should the butt joint seam be installed for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Install the butt joint seam at the center of the bottom pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step in the process for the 2003 GMC Envoy? Posted by Customer
    A:
    Reinstall the push pin retainers to the front door sealing weatherstrip at the base of the pillar and close the doors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What do you do after removing the push pin retainers for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Pull back the weatherstrip to expose the weatherstrip side retainer screws.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you secure the weatherstrip during installation for the 2005 GMC Envoy? Posted by Customer
    A:
    Secure the weatherstrip to the endgate opening flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What do you do with the weatherstrip side retainer screws for the 2008 GMC Envoy? Posted by Customer
    A:
    Remove these screws and take out the weatherstrip side retainer from the windshield pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the weatherstrip be aligned during installation for the 2007 GMC Envoy? Posted by Customer
    A:
    Align the weatherstrip to the door opening, ensuring the 2 dots are positioned on the upper right and left sides, and the bond joint is at the lower center of the door opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    Is there anything else that may be necessary to complete the installation for the 2009 GMC Envoy? Posted by Customer
    A:
    Yes, spooning of the weatherstrip may be necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the upper molded detail from the front of the side access door for the 2004 GMC Envoy? Posted by Customer
    A:
    Insert the Door Trim Pad Clip Remover (J 38778) under the weatherstrip mold and release the three integral retaining pins on the mold to the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What needs to be done with the weatherstrip side retainer screws for the 2006 Chevrolet Trailblazer? Posted by Customer
    A:
    Remove these screws and take out the weatherstrip side retainer from the windshield pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Weatherstrip 25830971 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25830971 Weatherstrip is available in the market under the name GM Weather Strip. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25830971 Weatherstrip fits certain Chevrolet Trailblazer models, as well as GMC Envoy. Additionally, it is compatible with Buick Rainier and Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 25830971 maintains top performance when functioning as the Weatherstrip Assembly-Lift Gate Window unit. The component 25830971 is constructed from durable material and its dimensions span 4.8 x 18.3 x 17.5 inches while weighing 2.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Weatherstrip, Upper End Gate. The part 25830971 has available replacement options 15079567, 15159194, 15181271, 15194242, 15917733. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.