Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 23345376
Lower Weatherstrip, Driver Side

2003-2014 GM

Customer Questions & Expert Answers (45)
GM 23345376 Lower Weatherstrip, Driver Side
  • Part Description
    Weatherstrip, Door Weatherstrip; Door Seal
  • Position
    Driver Side
  • Replaces
    15752763
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 23345376 Lower Weatherstrip, Driver Side is Ref No. 8 in the diagram below

    2008 Chevy Express 1500 Lower Weatherstrip, Driver Side Diagram for 23345376
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 23345376

  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2014 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2014 Chevrolet Express 2500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2003-2014 Chevrolet Express 3500Base, LS, LT8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2003-2014 GMC Savana 1500Base, LS, LT, SLE6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2014 GMC Savana 2500Base, LS, LT, SLE6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2003-2014 GMC Savana 3500Base, LS, LT, SLE8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 23345376 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 23345376 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the cargo door seal for the 2003 Chevrolet Express 3500? Posted by Customer
    A:
    Open the cargo door and pull the seal from the cargo door opening pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Seal
    Q:
    What should be noted when installing a new cargo door seal for the 2005 Chevrolet Express 2500? Posted by Customer
    A:
    A mastic sealer glue is included, so do not use weatherstrip adhesive; however, if reusing the seal, apply weatherstrip adhesive.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Seal
    Q:
    How do you install the new side door opening weatherstrip for the 2005 Chevrolet Express 2500? Posted by Customer
    A:
    Apply weatherstrip adhesive into the channel on the new side door opening weatherstrip using GM P/N 12345097 (Canadian P/N 10953479) or an equivalent.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the front door opening weatherstrip for the 2011 Chevrolet Express 1500? Posted by Customer
    A:
    Remove the hinge pillar trim panel, front door upper pillar garnish molding, front door lower pillar garnish molding, and front door stepwell mat.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the flange be prepared before installing a new seal for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    Clean all adhesive from the flange using GM P/N 8984 adhesive remover or an equivalent product.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Seal
    Q:
    What should be done after pressing the weatherstrip into place for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    Install the retainers at the ends into the door opening holes.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What adhesive should be used if reusing the old weatherstrip for the 2011 Chevrolet Express 2500? Posted by Customer
    A:
    Use GM Weatherstrip Adhesive GM P/N 12345097 (Canadian P/N 10953479) or an equivalent to secure the top of the weatherstrip to the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step in the installation process for the 2009 Chevrolet Express 2500? Posted by Customer
    A:
    Reinstall the rear door opening frame garnish molding, rear floor trim plate, passenger side rear corner trim panel, driver side body side rear trim panel, and finally the rear corner garnish molding.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after removing the old weatherstrip for the 2004 Chevrolet Express 3500? Posted by Customer
    A:
    Install the new weatherstrip onto the sliding side door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after seating the top pins for the 2006 Chevrolet Express 1500? Posted by Customer
    A:
    Insert the pin located on the pocket into the door sheet metal until fully seated, again checking for gaps.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after installing the cargo door seal for the 2006 Chevrolet Express 2500? Posted by Customer
    A:
    Close the cargo door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the rear door opening weatherstrip for the 2007 Chevrolet Express 2500? Posted by Customer
    A:
    Remove the rear corner garnish molding, driver side body side rear trim panel, passenger side rear corner trim panel, rear floor trim plate, and rear door opening frame garnish molding.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the side rear door lower weatherstrip for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    First, remove the weatherstrip from the door and take out the retainers from the holes in the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What adhesive should be used for the new weatherstrip for the 2009 Chevrolet Express 2500? Posted by Customer
    A:
    Apply GM P/N 12345097 (Canadian P/N 10953479) or an equivalent adhesive into the channel on the new weatherstrip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step for installation after removing the old weatherstrip for the 2005 Chevrolet Express 3500? Posted by Customer
    A:
    Place the weatherstrip into the roof rail.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the process for installing the new side door window weatherstrip for the 2009 Chevrolet Express 3500? Posted by Customer
    A:
    Place the side door window weatherstrip onto the window opening pinch-weld flange and press it into position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new weatherstrip for the 2011 Chevrolet Express 3500? Posted by Customer
    A:
    Place the weatherstrip into the roof rail, then press the retainers into the weatherstrip and into the holes in the roof rail.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be applied to the new weatherstrip before installation for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Apply GM P/N 12345097 (Canadian P/N 10953479) or an equivalent into the channel on the new weatherstrip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the sealing strip on the front door upper for the 2003 Chevrolet Express 3500? Posted by Customer
    A:
    Gently pull on the weatherstrip to remove it from the door pillar, then take out the weatherstrip retainers from the holes in the door pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the front door opening weatherstrip for the 2010 Chevrolet Express 2500? Posted by Customer
    A:
    Remove the hinge pillar trim panel, the front door upper pillar garnish molding, the front door lower pillar garnish molding, and the front door stepwell mat.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the front door upper weatherstrip for the 2006 Chevrolet Express 3500? Posted by Customer
    A:
    Gently pull the weatherstrip away from the door pillar to remove it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you replace the front or rear side door lower weatherstrip for the 2011 GMC Savana 2500? Posted by Customer
    A:
    First, remove the weatherstrip from the door, followed by the weatherstrip retainers from the holes in the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new left side rear door upper weatherstrip for the 2006 GMC Savana 2500? Posted by Customer
    A:
    Position the new weatherstrip onto the door and firmly press the retainers into the holes to secure it in place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the sliding door weatherstrip for the 2008 Chevrolet Express 3500? Posted by Customer
    A:
    Remove the weatherstrip from the sliding side door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the flange be prepared before installing a new seal for the 2004 GMC Savana 1500? Posted by Customer
    A:
    Clean all adhesive from the flange using GM P/N 8984 adhesive remover or an equivalent product.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Seal
    Q:
    How do you complete the installation of the weatherstrip for the 2003 GMC Savana 2500? Posted by Customer
    A:
    Attach the weatherstrip to the bottom of the door, and finally press the retainers in the side front door weatherstrip into the holes in the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after removing the weatherstrip for the 2011 GMC Savana 1500? Posted by Customer
    A:
    Take out the weatherstrip retainers from the holes in the door pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after seating the top pins for the 2009 GMC Savana 2500? Posted by Customer
    A:
    Insert the pin located on the pocket into the door sheet metal until fully seated, again checking for gaps.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step in the installation process for the 2005 GMC Savana 2500? Posted by Customer
    A:
    Press the retainers into the holes in the door until they are fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What components need to be reinstalled after the weatherstrip installation for the 2003 GMC Savana 3500? Posted by Customer
    A:
    Reinstall the rear door opening frame garnish molding, the rear floor trim plate, the passenger side rear corner trim panel, the driver side body side rear trim panel, and finally the rear corner garnish molding.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be removed after the hinge pillar trim panel for the 2004 GMC Savana 1500? Posted by Customer
    A:
    The front door upper and lower pillar garnish moldings.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you ensure while pressing the weatherstrip onto the flange for the 2005 GMC Savana 3500? Posted by Customer
    A:
    It does not pull away at the corners.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after securing the weatherstrip for the 2009 GMC Savana 3500? Posted by Customer
    A:
    Reinstall the body side window, addressing both stationary and swing-out types as required.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be noted when installing a new cargo door seal for the 2003 GMC Savana 2500? Posted by Customer
    A:
    A mastic sealer glue is included, so do not use weatherstrip adhesive; however, if reusing the seal, apply weatherstrip adhesive.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Seal
    Q:
    What should be done for clearance around body structure reinforcements for the 2003 GMC Savana 3500? Posted by Customer
    A:
    Cut slots as necessary for clearance around body structure reinforcements.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Seal
    Q:
    What should be applied for the installation of the weatherstrip for the 2004 GMC Savana 1500? Posted by Customer
    A:
    Apply weatherstrip adhesive into the channel on the rear door opening weatherstrip using GM P/N 12345097 (Canadian P/N 10953479) or an equivalent.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the sliding door weatherstrip for the 2011 GMC Savana 3500? Posted by Customer
    A:
    Remove the weatherstrip from the sliding side door and take out the weatherstrip retainers from the holes in the sliding side door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the side door opening weatherstrip for the 2009 GMC Savana 2500? Posted by Customer
    A:
    First, remove the hinge pillar upper garnish, hinge pillar lower garnish molding, passenger side front corner garnish molding, passenger side body side trim panel, and the side door stepwell mat.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new weatherstrip for the 2007 GMC Savana 3500? Posted by Customer
    A:
    Position the weatherstrip onto the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the weatherstrip be aligned during installation for the 2006 GMC Savana 3500? Posted by Customer
    A:
    Start at the corners to align the weatherstrip with the door opening pinch-weld flange, ensuring it does not pull away at the corners while pressing it onto the flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the rear hood seal for the 2010 GMC Savana 2500? Posted by Customer
    A:
    Align the slot in the rear hood seal with the cowl pinch-weld flange and press the rear hood seal into place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the sliding door weatherstrip for the 2010 GMC Savana 1500? Posted by Customer
    A:
    First, remove the weatherstrip from the sliding side door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after removing the upper trim panel for the 2009 GMC Savana 1500? Posted by Customer
    A:
    Take out the hinged body side window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after removing the upper trim panel for the 2004 GMC Savana 3500? Posted by Customer
    A:
    Next, take out the hinged body side window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lower Weatherstrip, Driver Side 23345376 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 23345376 Lower Weatherstrip, Driver Side is available in the market under the name GM Weather Strip, Door Seal. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 23345376 Lower Weatherstrip, Driver Side fits certain Chevrolet Express 1500, Express 2500, Express 3500 models, as well as GMC Savana 2500, Savana 3500, Savana 1500 models.
The original GM component designated by manufacturer part number 23345376 maintains top performance when functioning as the Weatherstrip, Door Weatherstrip; Door Seal unit at its Driver Side. The component 23345376 is constructed from durable material and its dimensions span 20.4 x 1.5 x 1.3 inches. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Weatherstrip, Side Door Opening; Weatherstrip. The part 23345376 has available replacement options 15752763. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.