ChevyParts
My Garage
My Account
Cart
OEM 2000 Chevrolet Tracker Brake Proportioning Valve
Proportioning Valve- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Brake Proportioning Valves found
2000 Chevrolet Tracker Pressure Valve Part Number: 91175539
$64.01 MSRP: $1028.59You Save: $964.58 (94%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Valve, Brake Pressure Mode; ABS Control Module; Modulator Valve; Valve, Electronic Brake Control
- Item Weight: 5.60 Pounds
- Item Dimensions: 12.5 x 12.5 x 13.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 91175539
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2000 Chevrolet Tracker Pressure Metering Valve Part Number: 30021018
Product Specifications- Other Name: Valve, Brake Master Cylinder Proportioning; Brake Proportioning Valve
- Item Weight: 2.20 Pounds
- Item Dimensions: 8.4 x 5.6 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 30021018
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2000 Chevrolet Tracker Modulator Valve Part Number: 30021032
Product Specifications- Other Name: Valve, Electronic Brake Control; Modulator
- Item Weight: 14.10 Pounds
- Item Dimensions: 12.9 x 12.8 x 12.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 30021032
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2000 Chevrolet Tracker Pressure Metering Valve Part Number: 30021985
Product Specifications- Other Name: Valve, Brake Master Cylinder Proportioning; Brake Proportioning Valve
- Item Weight: 1.20 Pounds
- Item Dimensions: 8.2 x 6.6 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 30021985
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2000 Chevrolet Tracker Pressure Metering Valve Part Number: 30021019
Product Specifications- Other Name: Valve, Brake Master Cylinder Proportioning; Brake Proportioning Valve
- Item Weight: 0.70 Pounds
- Item Dimensions: 6.4 x 4.4 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 30021019
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2000 Chevrolet Tracker Brake Proportioning Valve
With a comprehensive array of OEM 2000 Chevrolet Tracker Brake Proportioning Valve, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Tracker Brake Proportioning Valve are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2000 Chevrolet Tracker Brake Proportioning Valve Parts Questions & Experts Answers
- Q: How to Replace a Brake Proportioning Valve on 2000 Chevrolet Tracker?A: Start by preparing the reservoir cap area and drawing out the fluid with a syringe before starting lspv replacement. Put the vehicle on stands and remove the brake hoses (3,4) from their connections at the lspv. Remove two bolts to split the lspv from the frame and disconnect the single bolt that holds the lspv assembly with spring and stay in place. Untether the lspv spring and lspv stay from their attachment on the lever . Insert multipurpose grease on the upper and lower pivot areas of the spring before placing the lspv spring and lspv stay onto the lever of the lspv assembly. Install the lspv assembly on the vehicle body and set its bolts to 23 nm tightness (17.0 ft. Lbs.). Fasten the lspv stay bolt using torque of 23 nm (17.0 ft. Lbs.). Connect the brake lines to lspv while tightening flare nuts (3,4) to 16 nm (11.5 ft. Lbs.) and reservoir plug to 7.5 nm (66.4 inch lbs.). Place the vehicle on the ground and complete the brake system fluid reservoir before bleeding air from the brakes. Set the vehicle on a smooth surface to check if the vehicle height matches its specifications. Pull up the lspv lever until resistance stops and take the coil spring measurement at its free ends which should show 103 mm (4.06 inch). Adjust the spring position through the stay component then secure the stay bolt at 23 nm (17.0 ft. Lbs.). Check the body and pipe connections of the lspv while looking for brake fluid leaks and measuring the brake pedal movement.