OEM 2001 Chevrolet Malibu Air Bag Clockspring

2001 Chevrolet Malibu Air Bag Clockspring Parts and Q&A

• Q: How to replace the Air Bag Clockspring in the Steering Wheel on 2001 Chevrolet Malibu?

  A: To replace the inflatable restraint Steering Wheel module air bag clock spring, first there is a need to disable the sir system and remove the Steering Wheel assembly, as well as tilt lever and the instrument panel carrier. Unplug the sir wiring harness from the back of the fuse panel and pull off the multi-function lever. Next, remove retaining clip of the air bag clock spring assembly and clip the plastic zip tie to separate the sir coil wiring harness from the air bag clock spring assembly. For installation; when installing an air bag clock spring assembly previously removed, start by centering it to the steering column an alignment with the horn tower to the cancelling cam assembly inner ring and then the projections on the outer ring. Assemble the pre-centered air bag clock spring assembly to the steering column, remove and throw away the centering tab, and install the air bag clock spring assembly retaining ring on the air bag clock spring assembly, ensuring it is seated in the groove on the shaft. Grasping the lower air bag clock spring assembly wire gently in your hand, remove any kinks on it, as they can impair the shaft lock mechanism. Route the sir coil wiring harness and install new plastic zip ties, and then air bag clock spring assembly retaining clip. Unplug the sir harness from the back of the fuse panel, and reinstall the instrument panel carrier, tilt lever, and Steering Wheel assembly before turning on the sir system.