How to Replace a Rear Parking Brake Cable for Drum Brakes on 2001 Chevrolet Venture?

Start by raising the vehicle then supporting it with stands and remove the tire and wheel from the rear wheel position. Widen the equalizer by easing tension on its cable and separate the rear cable from its connection to the front cable. The right rear cable requires cable removal from its clip while the left rear cable demands full removal of the equalizer nut from the equalizer stud connected to it. You must begin by taking out the rear Brake Drum followed by removing the park brake cable from the park brake lever. The Parking Brake Cable release tool (J37043) should be used for backing plate rear park brake cable removal from the backing plate before cable extraction from the vehicle. You should start by putting the rear park brake cable into the backing plate and following up with connecting to the park brake lever before moving to the front cable. To install the right rear cable secure it to the clip section while the left rear cable requires attachment of the equalizer stud to the equalizer nut component. The installation sequence involves adjusting the park brake followed by associating the rear Brake Drum and setting the rear tire and wheel before lowering the vehicle.

OEM 2001 Chevrolet Venture Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Parking Brake Cables found

View related parts
2001 Chevrolet Venture Rear Cable
Part Number: 10308436
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
- Replaces: 10251768, 10410822
- Item Weight: 1.00 Pounds
- Item Dimensions: 13.3 x 13.5 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10308436
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2001 Chevrolet Venture Front Cable
Part Number: 10306505
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Front
- Replaces: 10405683
- Item Weight: 3.10 Pounds
- Item Dimensions: 14.3 x 14.0 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10306505
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2001 Chevrolet Venture Front Cable
Part Number: 10306506
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Front
- Item Weight: 2.90 Pounds
- Item Dimensions: 14.1 x 13.1 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10306506
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2001 Chevrolet Venture Rear Cable
Part Number: 10308435
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
- Item Weight: 1.20 Pounds
- Item Dimensions: 13.9 x 13.5 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10308435
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

2001 Chevrolet Venture Parking Brake Cable

With a comprehensive array of OEM 2001 Chevrolet Venture Parking Brake Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Venture Parking Brake Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Venture Parking Brake Cable Parts Questions & Experts Answers

Q: How to Replace a Rear Parking Brake Cable for Drum Brakes on 2001 Chevrolet Venture?
A: Start by raising the vehicle then supporting it with stands and remove the tire and wheel from the rear wheel position. Widen the equalizer by easing tension on its cable and separate the rear cable from its connection to the front cable. The right rear cable requires cable removal from its clip while the left rear cable demands full removal of the equalizer nut from the equalizer stud connected to it. You must begin by taking out the rear Brake Drum followed by removing the park brake cable from the park brake lever. The Parking Brake Cable release tool (J37043) should be used for backing plate rear park brake cable removal from the backing plate before cable extraction from the vehicle. You should start by putting the rear park brake cable into the backing plate and following up with connecting to the park brake lever before moving to the front cable. To install the right rear cable secure it to the clip section while the left rear cable requires attachment of the equalizer stud to the equalizer nut component. The installation sequence involves adjusting the park brake followed by associating the rear Brake Drum and setting the rear tire and wheel before lowering the vehicle.