How to replace the front outside door handle on 2002 Cadillac DeVille?

The replacement process of the front outside Door Handle begins by fully elevating the window pane. The first step requires removing the door trim panel followed by extracting both the door module and water deflector. The pathway through the rear access hole of the inner panel enables technicians to disconnect the outside Door Handle rod from the door latch retainer clip followed by separating both the outside lock rod from the door latch and the lock cylinder harness electrical connector from the door harness (driver door exclusive). Use the access holes to remove the outside Door Handle fasteners before separating the Door Handle assembly by lifting up the handle and its attached components while removing them through the holes. Place the rods into the cutout before rotating the handle into position then push the handle while pulling inward to engage the retaining tabs into the door. Reconnect the lock cylinder harness electrical connector and through the rear access hole connect the outside lock rod to the door latch prior to tightening the outside Door Handle fasteners to 7 n.m (62 lb in). Proceed by inserting the outer Door Handle rod into the retainer clip before closing the clip to join it with the door latch. The final assembly step includes putting back the water deflector followed by door module and door trim panel.

OEM 2002 Cadillac DeVille Door Handle

Inside Door Handle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Door Handles found

View related parts
2002 Cadillac DeVille Handle, Outside, Driver Side
Part Number: 20857749
$31.79 MSRP: $47.31
You Save: $15.52 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle, Door Outside Handle; Exterior Door Handle
- Position: Driver Side
- Replaces: 25749397, 25843393, 25749403, 25705398
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.8 x 4.8 x 11.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20857749
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Cadillac DeVille Submodels:
- Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS
View related parts
2002 Cadillac DeVille Handle, Inside, Front Passenger Side
Part Number: 25705254
$22.37 MSRP: $64.85
You Save: $42.48 (66%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Assembly-Front Side Door Inside; Interior Door Handle; Handle, Door Lock Inside Handle
- Position: Front Passenger Side
- Item Weight: 1.00 Pounds
- Item Dimensions: 9.7 x 3.4 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25705254
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Cadillac DeVille Submodels:
- Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS
View related parts
2002 Cadillac DeVille Mirror Inside, Passenger Side
Part Number: 20857697
Product Specifications
- Other Name: Handle, Door Outside Handle; Exterior Door Handle; Handle, Outside
- Position: Passenger Side
- Replaces: 25843395, 25749402, 25705397, 25749396
- Item Weight: 0.80 Pounds
- Item Dimensions: 4.9 x 4.8 x 11.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20857697
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Cadillac DeVille Submodels:
- Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS
View related parts
2002 Cadillac DeVille Handle, Inside, Front Driver Side
Part Number: 25705255
Product Specifications
- Other Name: Handle Assembly-Front Side Door Inside; Interior Door Handle; Handle, Door Lock Inside Handle
- Position: Front Driver Side
- Item Weight: 1.00 Pounds
- Item Dimensions: 10.2 x 3.8 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25705255
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Cadillac DeVille Submodels:
- Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS
View related parts
2002 Cadillac DeVille Handle, Outside, Driver Side
Part Number: 20857696
Product Specifications
- Other Name: Handle, Door Outside Handle; Exterior Door Handle
- Position: Driver Side
- Replaces: 25749399, 25749406, 25843394
- Item Weight: 0.80 Pounds
- Item Dimensions: 11.8 x 5.3 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20857696
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Cadillac DeVille Submodels:
- Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS

2002 Cadillac DeVille Door Handle

With a comprehensive array of OEM 2002 Cadillac DeVille Door Handle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Cadillac DeVille Door Handle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Cadillac DeVille Parts Questions & Experts Answers

Q: How to replace the front outside door handle on 2002 Cadillac DeVille?
A: The replacement process of the front outside Door Handle begins by fully elevating the window pane. The first step requires removing the door trim panel followed by extracting both the door module and water deflector. The pathway through the rear access hole of the inner panel enables technicians to disconnect the outside Door Handle rod from the door latch retainer clip followed by separating both the outside lock rod from the door latch and the lock cylinder harness electrical connector from the door harness (driver door exclusive). Use the access holes to remove the outside Door Handle fasteners before separating the Door Handle assembly by lifting up the handle and its attached components while removing them through the holes. Place the rods into the cutout before rotating the handle into position then push the handle while pulling inward to engage the retaining tabs into the door. Reconnect the lock cylinder harness electrical connector and through the rear access hole connect the outside lock rod to the door latch prior to tightening the outside Door Handle fasteners to 7 n.m (62 lb in). Proceed by inserting the outer Door Handle rod into the retainer clip before closing the clip to join it with the door latch. The final assembly step includes putting back the water deflector followed by door module and door trim panel.