Make sure this part fits

GM 20857697
Mirror Inside, Passenger Side

1998-2011 GM

Customer Questions & Expert Answers (21)
GM 20857697 Mirror Inside, Passenger Side
GM 20857697 Mirror Inside, Passenger Side
  • Part Description
    Handle, Door Outside Handle; Exterior Door Handle
  • Position
    Passenger Side
  • Replaces
    25843395, 25749402, 25705397, 25749396
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2007 Cadillac CTSBase, Luxury, Luxury Sport, V6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
    2006-2011 Cadillac DTSBase, Livery, Luxury, Platinum, Premium8 Cyl 4.6 L GAS
    2000-2005 Cadillac DeVilleBase, DHS, DTS, Protection Series8 Cyl 4.6 L GAS
    1998-2004 Cadillac SevilleSLS, STS8 Cyl 4.6 L GAS
    2002 Saturn L100Base4 Cyl 2.2 L GAS
    2002 Saturn L200Base4 Cyl 2.2 L GAS
    2002 Saturn L300Base6 Cyl 3.0 L GAS
    2002 Saturn LW200Base4 Cyl 2.2 L GAS
    2002 Saturn LW300Base6 Cyl 3.0 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 20857697 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 20857697 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step in the process for the 2004 Cadillac CTS? Posted by Customer
    A:
    Reinstall the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step in the installation process for the 2001 Cadillac DeVille? Posted by Customer
    A:
    Attach the rod to the outside door handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the torque specification for securing the outside door handle fasteners for the 2003 Cadillac DeVille? Posted by Customer
    A:
    7 N.m (62 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you disconnect the lock cylinder rod for the 2007 Cadillac CTS? Posted by Customer
    A:
    Disconnect it from the door latch and the outside door handle rod by opening the retainer at the door latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the next step after disconnecting the rods and connectors for the 2005 Cadillac DeVille? Posted by Customer
    A:
    Remove the outside door handle fasteners through the access holes.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be removed to access the outside door handle for the 2003 Cadillac CTS? Posted by Customer
    A:
    Remove the door trim panel and pull back the water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the final step in the replacement process for the 2001 Cadillac DeVille? Posted by Customer
    A:
    Reinstall the water deflector, door module, and door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be removed to access the outside door handle for the 2006 Cadillac CTS? Posted by Customer
    A:
    Remove the door trim panel and pull the rear of the water deflector away from the door panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the front side door inside handle for the 2004 Cadillac CTS? Posted by Customer
    A:
    Remove the front door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the installation process for the new door handle for the 2002 Cadillac DeVille? Posted by Customer
    A:
    Insert the rods through the cutout, rotate the handle into position, and apply upward and inward pressure until the retaining tabs engage the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the front outside door handle for the 2003 Cadillac CTS? Posted by Customer
    A:
    Place the window in the full up position and remove the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be removed after ensuring the window is up for the 2001 Cadillac Seville? Posted by Customer
    A:
    Remove the door trim panel and the water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you detach the door handle assembly for the 2000 Cadillac DeVille? Posted by Customer
    A:
    Push upward on the two lower retaining tabs and lift the handle, latch rod, and lock cylinder out.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the final step in the process for the 2003 Cadillac Seville? Posted by Customer
    A:
    Secure the two fasteners in the door handle and finally, reinstall the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you disconnect the outside door handle rod for the 2004 Cadillac DeVille? Posted by Customer
    A:
    Access the inner panel's rear hole to disconnect it from the door latch retainer clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after disconnecting the lock cylinder rod for the 2001 Cadillac Seville? Posted by Customer
    A:
    Disconnect the outside door handle rod from the door latch retainer clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should you do to engage the assembly properly for the 2005 Cadillac CTS? Posted by Customer
    A:
    Slide the assembly towards the rear to engage the three tabs.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the rear side door outside handle for the 2000 Cadillac Seville? Posted by Customer
    A:
    Ensure the window is fully up.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after removing the door trim panel for the 2002 Cadillac Seville? Posted by Customer
    A:
    Take out the water deflector and disconnect the power window switch to prevent injury from the Express Down Feature.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you connect the outside door handle rod to the latch for the 2004 Cadillac Seville? Posted by Customer
    A:
    Insert the rod into the retainer clip on the door latch assembly and close the clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Mirror Inside, Passenger Side 20857697 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 20857697 Mirror Inside, Passenger Side is available in the market under the name GM Door Handle. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 20857697 Mirror Inside, Passenger Side fits certain Cadillac CTS, DTS, DeVille models, as well as Saturn L200, L300, L100 models.
The original GM component designated by manufacturer part number 20857697 maintains top performance when functioning as the Handle, Door Outside Handle; Exterior Door Handle unit at its Passenger Side. The component 20857697 is constructed from durable material and its dimensions span 4.9 x 4.8 x 11.8 inches while weighing 0.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Handle, Outside. The part 20857697 has available replacement options 25843395, 25749402, 25705397, 25749396. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.