How to replace the control arm bushing on 2002 Chevrolet Venture?

When replacing the Control Arm bushing start by elevating your vehicle before using a utility stand to stabilize the Control Arm in front of the coil spring. Pull out the Control Arm bolts from the rear axle and let the rear axle descend enough for the Control Arm bushing to become accessible. To remove the Control Arm bushing use the j 28685 (J 28685) rear suspension bushing remover/installer together with the j 9519-e (J 9519-E) ball joint remover/installer kit on the lower Control Arm while marking its initial orientation. When installing new bushings position the flat side toward the mark on the Control Arm for a 45-degree installation using j 28685 (J 28685) and j 9519-e (J 9519-E). Use the j 28685 (J 28685) tool to check that the bushing sticks out 9.8 mm (0.39 inch) from the Control Arm while making sure the bushing end reaches the indicator line on j 28685 (J 28685). Start by raising the rear axle with a utility stand, reattach the Control Arm bolt to the rear axle, then remove the stand before lowering the vehicle entirely.

OEM 2002 Chevrolet Venture Control Arm Bushing

Suspension Arm Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Control Arm Bushings found

View related parts
2002 Chevrolet Venture Axle Beam Bushing, Rear
Part Number: 15829134
$16.65 MSRP: $26.09
You Save: $9.44 (37%)
ADD TO CART
Product Specifications
- Other Name: Bushing, Rear Axle Control Arm; Axle Support Bushing; Crossmember Bushing; Axle Pivot Bushing; Bushing, Rear Axle Support And Control Arm
- Position: Rear
- Replaces: 10239185, 10341351, 15219518
- Item Weight: 1.20 Pounds
- Item Dimensions: 3.2 x 3.2 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15829134
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2002 Chevrolet Venture Lower Control Arm Front Bushing
Part Number: 10412124
$24.09 MSRP: $37.72
You Save: $13.63 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing Assembly-Front Lower Control Arm; Suspension Control Arm Bushing; Control Arm Bushing; Axle Pivot Bushing; Bushings; Bushing, Steering Knuckle Lower Control Arm
- Position: Front Lower
- Replaces: 10393215, 10255029
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.2 x 3.1 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10412124
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2002 Chevrolet Venture Lower Control Arm Bushing, Front
Part Number: 10260991
Product Specifications
- Other Name: Bushing Assembly-Front Lower Control Arm; Suspension Control Arm Bushing; Control Arm Bushing; Axle Pivot Bushing; Lower Control Arm Rear Bushing; Bushings; Bushing, Steering Knuckle Lower Control Arm
- Position: Front Lower
- Replaces: 10264395
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.0 x 2.6 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10260991
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2002 Chevrolet Venture Lower Control Arm Bushing
Part Number: 10412924
Product Specifications
- Other Name: Bushing; Axle Support Bushing; Control Arm Bushing; Crossmember Bushing; Axle Pivot Bushing; Axle Beam Mount; Suspension Crossmember Bushing; Bushings; Bushing, Rear Axle Support And Control Arm; Bushing, Rear Axle Control Arm
- Position: Rear Lower
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.6 x 3.0 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10412924
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

2002 Chevrolet Venture Control Arm Bushing

With a comprehensive array of OEM 2002 Chevrolet Venture Control Arm Bushing, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Venture Control Arm Bushing are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Venture Control Arm Bushing Parts Questions & Experts Answers

Q: How to replace the control arm bushing on 2002 Chevrolet Venture?
A: When replacing the Control Arm bushing start by elevating your vehicle before using a utility stand to stabilize the Control Arm in front of the coil spring. Pull out the Control Arm bolts from the rear axle and let the rear axle descend enough for the Control Arm bushing to become accessible. To remove the Control Arm bushing use the j 28685 (J 28685) rear suspension bushing remover/installer together with the j 9519-e (J 9519-E) ball joint remover/installer kit on the lower Control Arm while marking its initial orientation. When installing new bushings position the flat side toward the mark on the Control Arm for a 45-degree installation using j 28685 (J 28685) and j 9519-e (J 9519-E). Use the j 28685 (J 28685) tool to check that the bushing sticks out 9.8 mm (0.39 inch) from the Control Arm while making sure the bushing end reaches the indicator line on j 28685 (J 28685). Start by raising the rear axle with a utility stand, reattach the Control Arm bolt to the rear axle, then remove the stand before lowering the vehicle entirely.