How to replace the front door hinge on the body side on 2003 Chevrolet Avalanche 1500?

Start the front door hinge body side replacement process by taking away all associated panels and components followed by sealing removal from the current hinge area before marking its position on the hinge pillar. Light hand-sand the hinge with a 100 grit or superior sandpaper to expose the four pillar welds before center punching each mark and using a 13 mm (1/2 in) hole saw through the hinge base to drill at each position without penetrating into the pillar. Induce the hinge with the help of a chisel or drill the holes before completely cleaning the pillar face to prepare it for the service hinge installation. Place the service hinge inside the scribe marks before center punching all studs locations on the hinge pillar. Use a drill bit with 3 mm (1/8 in) diameter to bore holes at punch marks before drilling 11.5 mm (29/64 in) diameter holes for the studs. All bare metal surfaces need cleaning before applying approved anti-corrosion primer according to GM 4901M-D-2000 GM Approved Refinish Materials. You need to pass feed fish wire (GM P/N 15017229) through the hinge and hinge stud hole before installing the stud (GM P/N 15017230) to the wire end then pulling the system into position. Cut off the fish wire from the hinge-stud system before drawing the stud through the pillar using the provided nuts GM P/N 11516746. Rephrase the stud installation steps for all locations before taking out service nuts to apply a full-bodied sealant on the hinge mounting surface for proper covering. Mount the hinge onto the pillar through its attachment holes by completing the installation with the provided nuts while torquing them to 25 N.m (18 lb ft). After surface pre-treatment and refinishing one must reapply sealants before reattaching all necessary panels.

OEM 2003 Chevrolet Avalanche 1500 Door Hinge

Interior Door Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Door Hinges found

View related parts
2003 Chevrolet Avalanche 1500 Lower Hinge, Driver Side
Part Number: 12472843
$64.29 MSRP: $92.79
You Save: $28.50 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Kit, Door Hinge; Upper Hinge; Hinge; Door Hinge
- Position: Driver Side
- Item Weight: 1.60 Pounds
- Item Dimensions: 7.0 x 4.3 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12472843
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Avalanche 1500 Submodels:
- Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
2003 Chevrolet Avalanche 1500 Hinge
Part Number: 15080226
$75.63 MSRP: $112.57
You Save: $36.94 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge, End Gate Closing; Door Hinge
- Replaces: 15761243
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.4 x 3.3 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15080226
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Avalanche 1500 Submodels:
- Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
2003 Chevrolet Avalanche 1500 Lower Hinge, Front
Part Number: 19354132
$164.44 MSRP: $245.85
You Save: $81.41 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Kit, Front Side Door (Body Side); Door Hinge; Upper Hinge; Hinge; Hinge Kit, Door Hinge
- Position: Front
- Replaces: 12476447, 12477887, 12472841
- Item Weight: 2.50 Pounds
- Item Dimensions: 7.9 x 5.4 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19354132
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Avalanche 1500 Submodels:
- Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
2003 Chevrolet Avalanche 1500 Hinge, Driver Side
Part Number: 15080227
$60.74 MSRP: $90.40
You Save: $29.66 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge, End Gate Closing; Door Hinge
- Position: Driver Side
- Replaces: 15761244
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.4 x 3.3 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15080227
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Avalanche 1500 Submodels:
- Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
2003 Chevrolet Avalanche 1500 Hinge Assembly, Passenger Side
Part Number: 12476452
$204.32 MSRP: $305.48
You Save: $101.16 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Kit, Door Hinge; Hinge; Door Hinge
- Position: Passenger Side
- Item Weight: 1.30 Pounds
- Item Dimensions: 7.4 x 4.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12476452
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Avalanche 1500 Submodels:
- Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
2003 Chevrolet Avalanche 1500 Lower Hinge, Front
Part Number: 19354133
$168.88 MSRP: $252.48
You Save: $83.60 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Kit, Front Side Door (Body Side); Door Hinge; Upper Hinge; Hinge; Hinge Kit, Door Hinge
- Position: Front
- Replaces: 12476448, 12477888, 12472842
- Item Weight: 2.30 Pounds
- Item Dimensions: 5.1 x 5.2 x 11.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19354133
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Avalanche 1500 Submodels:
- Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
2003 Chevrolet Avalanche 1500 Hinge Assembly, Driver Side
Part Number: 12476451
$160.60 MSRP: $240.11
You Save: $79.51 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Kit, Door Hinge; Hinge; Door Hinge
- Position: Driver Side
- Item Weight: 1.30 Pounds
- Item Dimensions: 7.1 x 4.1 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12476451
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Avalanche 1500 Submodels:
- Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
2003 Chevrolet Avalanche 1500 Hinge Assembly, Rear Driver Side
Part Number: 19354130
$159.94 MSRP: $239.11
You Save: $79.17 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Kit, Rear Side Door (Body Side); Door Hinge; Hinge; Hinge Kit, Door Hinge
- Position: Rear Driver Side
- Replaces: 12476449
- Item Weight: 1.30 Pounds
- Item Dimensions: 5.1 x 5.1 x 11.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19354130
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Avalanche 1500 Submodels:
- Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
2003 Chevrolet Avalanche 1500 Upper Hinge, Passenger Side
Part Number: 12472844
$93.05 MSRP: $179.03
You Save: $85.98 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Kit, Door Hinge; Lower Hinge; Hinge; Door Hinge
- Position: Passenger Side
- Item Weight: 1.90 Pounds
- Item Dimensions: 6.9 x 4.5 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12472844
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Avalanche 1500 Submodels:
- Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
2003 Chevrolet Avalanche 1500 Hinge Assembly, Rear Passenger Side
Part Number: 19354131
$183.76 MSRP: $274.74
You Save: $90.98 (34%)
Product Specifications
- Other Name: Hinge Kit, Rear Side Door (Body Side); Door Hinge; Hinge; Hinge Kit, Door Hinge
- Position: Rear Passenger Side
- Replaces: 12476450
- Item Weight: 2.30 Pounds
- Item Dimensions: 5.2 x 5.2 x 11.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19354131
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Avalanche 1500 Submodels:
- Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS

2003 Chevrolet Avalanche 1500 Door Hinge

With a comprehensive array of OEM 2003 Chevrolet Avalanche 1500 Door Hinge, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Chevrolet Avalanche 1500 Door Hinge are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Chevrolet Avalanche 1500 Door Hinge Parts Questions & Experts Answers

Q: How to replace the front door hinge on the body side on 2003 Chevrolet Avalanche 1500?
A: Start the front door hinge body side replacement process by taking away all associated panels and components followed by sealing removal from the current hinge area before marking its position on the hinge pillar. Light hand-sand the hinge with a 100 grit or superior sandpaper to expose the four pillar welds before center punching each mark and using a 13 mm (1/2 in) hole saw through the hinge base to drill at each position without penetrating into the pillar. Induce the hinge with the help of a chisel or drill the holes before completely cleaning the pillar face to prepare it for the service hinge installation. Place the service hinge inside the scribe marks before center punching all studs locations on the hinge pillar. Use a drill bit with 3 mm (1/8 in) diameter to bore holes at punch marks before drilling 11.5 mm (29/64 in) diameter holes for the studs. All bare metal surfaces need cleaning before applying approved anti-corrosion primer according to GM 4901M-D-2000 GM Approved Refinish Materials. You need to pass feed fish wire (GM P/N 15017229) through the hinge and hinge stud hole before installing the stud (GM P/N 15017230) to the wire end then pulling the system into position. Cut off the fish wire from the hinge-stud system before drawing the stud through the pillar using the provided nuts GM P/N 11516746. Rephrase the stud installation steps for all locations before taking out service nuts to apply a full-bodied sealant on the hinge mounting surface for proper covering. Mount the hinge onto the pillar through its attachment holes by completing the installation with the provided nuts while torquing them to 25 N.m (18 lb ft). After surface pre-treatment and refinishing one must reapply sealants before reattaching all necessary panels.