How to replace the Crankshaft Position Sensor on 2003 Chevrolet Corvette?

When replacing the crankshaft position (CKP) sensor start by disconnecting the negative Battery Cable before lifting the vehicle to remove the Starter. Remove the Crankshaft Position Sensor retaining bolt while disconnecting the sensor electrical connector. Clean the area around the sensor to avoid engine contamination by foreign debris. Next, remove the ckp sensor. Install the new ckp sensor then bolt it into place by tightening it to 25 n.m (18 lb ft). Following the same steps in reverse order from step 4 you should reconnect the ckp sensor electrical connector then reinstall the Starter along with lowering the vehicle before reconnecting the negative Battery Cable. The transmitter programming process needs completion while performing the ckp system variation learn procedure.

OEM 2003 Chevrolet Corvette Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Position Sensor found

View related parts
2003 Chevrolet Corvette Crankshaft Position Sensor
Part Number: 12560228
$65.79 MSRP: $117.48
You Save: $51.69 (44%)
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Crankshaft Sensor
- Replaces: 12555566
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.4 x 2.9 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12560228
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS

2003 Chevrolet Corvette Crankshaft Position Sensor

With a comprehensive array of OEM 2003 Chevrolet Corvette Crankshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Chevrolet Corvette Crankshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Chevrolet Corvette Parts Questions & Experts Answers

Q: How to replace the Crankshaft Position Sensor on 2003 Chevrolet Corvette?
A: When replacing the crankshaft position (CKP) sensor start by disconnecting the negative Battery Cable before lifting the vehicle to remove the Starter. Remove the Crankshaft Position Sensor retaining bolt while disconnecting the sensor electrical connector. Clean the area around the sensor to avoid engine contamination by foreign debris. Next, remove the ckp sensor. Install the new ckp sensor then bolt it into place by tightening it to 25 n.m (18 lb ft). Following the same steps in reverse order from step 4 you should reconnect the ckp sensor electrical connector then reinstall the Starter along with lowering the vehicle before reconnecting the negative Battery Cable. The transmitter programming process needs completion while performing the ckp system variation learn procedure.

Related 2003 Chevrolet Corvette Parts

Alternate Year Models

2002 Chevrolet Corvette Crankshaft Position Sensor 2004 Chevrolet Corvette Crankshaft Position Sensor