How to replace the brake line using the J 29803-A ISO Flaring Kit on 2004 Chevrolet Monte Carlo?

The J 29803-A ISO Flaring Kit (J 29803-A) should be used to replace brake pipes by utilizing double-walled steel brake pipe to avoid brake system failures. Start by buying tubing and steel fitting nuts with proper measurements then cut the tubing to match the old pipe measurement together with 3 mm (1/8 inch) extra length for every ISO flare. Put fittings into tubing before creating the flare while you should chamfer all pipe dimensions inside and out with a de-burring tool. Clear all remaining lubricants off the brake pipe and flaring tool before securing the J 29803-A (J 29803-A) tool body by using a vise clamp. Pick up the appropriate forming mandrel and forming collet for your pipe size then feed the forming mandrel into tool body space before tightening the forcing screw to the mandrel contact point then rotating it one full turn backward. Fit the brake pipe through the clamping nut to the correct collet position where the tube length should reach around 19 mm (3/4 inch). Insert the tool body's collet and clamp down securely and then use a professional wrench to tighten the forcing screw until it stops without going beyond the bottom. The clamping operation concludes when the clamping nut is loosened and the clamping nut assemblies are taken apart from one another. Bend the pipe to match the old pipe but maintain a clearance of 19 mm (3/4 inch) from moving or vibrating components.

OEM 2004 Chevrolet Monte Carlo Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Lines found

View related parts
2004 Chevrolet Monte Carlo Flex Hose, Front Driver Side
Part Number: 22163577
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 19.0 x 7.2 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22163577
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2004 Chevrolet Monte Carlo Flex Hose, Front
Part Number: 22163414
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front
- Item Weight: 0.70 Pounds
- Item Dimensions: 19.8 x 7.2 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22163414
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2004 Chevrolet Monte Carlo Flex Hose, Driver Side
Part Number: 15876864
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Replaces: 22163799
- Item Weight: 0.80 Pounds
- Item Dimensions: 13.5 x 4.9 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15876864
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2004 Chevrolet Monte Carlo Flex Hose, Passenger Side
Part Number: 15876863
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Replaces: 22163798
- Item Weight: 0.80 Pounds
- Item Dimensions: 13.6 x 4.9 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15876863
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

2004 Chevrolet Monte Carlo Brake Line

With a comprehensive array of OEM 2004 Chevrolet Monte Carlo Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Monte Carlo Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Monte Carlo Parts Questions & Experts Answers

Q: How to replace the brake line using the J 29803-A ISO Flaring Kit on 2004 Chevrolet Monte Carlo?
A: The J 29803-A ISO Flaring Kit (J 29803-A) should be used to replace brake pipes by utilizing double-walled steel brake pipe to avoid brake system failures. Start by buying tubing and steel fitting nuts with proper measurements then cut the tubing to match the old pipe measurement together with 3 mm (1/8 inch) extra length for every ISO flare. Put fittings into tubing before creating the flare while you should chamfer all pipe dimensions inside and out with a de-burring tool. Clear all remaining lubricants off the brake pipe and flaring tool before securing the J 29803-A (J 29803-A) tool body by using a vise clamp. Pick up the appropriate forming mandrel and forming collet for your pipe size then feed the forming mandrel into tool body space before tightening the forcing screw to the mandrel contact point then rotating it one full turn backward. Fit the brake pipe through the clamping nut to the correct collet position where the tube length should reach around 19 mm (3/4 inch). Insert the tool body's collet and clamp down securely and then use a professional wrench to tighten the forcing screw until it stops without going beyond the bottom. The clamping operation concludes when the clamping nut is loosened and the clamping nut assemblies are taken apart from one another. Bend the pipe to match the old pipe but maintain a clearance of 19 mm (3/4 inch) from moving or vibrating components.