How to replace the front Fender Splash Shield on 2005 Buick Century?

Begin front fender splash shield replacement by removing front bumper fascia bolts from the front fender splash shield and the nut from the stud at the rear of the front fender splash shield before proceeding to dislodge the bolt from the front tab of the front fender splash shield at the lower engine compartment side rail and then eliminating the rear fender bolts. You must remove the components at the rear of the front fender splash shield from the fender after they have been detached. Place the front fender splash shield into the wheelhouse opening by positioning it over the stud and apply a nut at the rear section of the front fender splash shield until it reaches 4 Nm (35 lb in) torque. The installation begins by tightening the front bumper fascia bolts of the front fender splash shield at 2 Nm (18 lb in). The second step includes installing the bolt at the fender's rear side and tightening it to 7 Nm (61 lb in). Fasten and tighten the bolt from the front tab of the front fender splash shield at the lower engine compartment side rail to 4.5 Nm (40 lb in).

OEM 2005 Buick Century Fender Splash Shield

Wheelhouse Liner

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Fender Splash Shields found

View related parts
2005 Buick Century Splash Shield, Front Inner Passenger Side Part Number: 10293182
$10.91 MSRP: $11.11
You Save: $0.20 (2%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield, Front Fender Inner Wheel House; Fender Splash Shield; Engine Cover
- Position: Front Inner Passenger Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 19.2 x 9.6 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10293182
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
View related parts
2005 Buick Century Splash Shield, Front Inner Driver Side Part Number: 10285881
$11.53
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield, Front Fender Inner Wheel House; Fender Splash Shield; Engine Cover
- Position: Front Inner Driver Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 19.1 x 10.6 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10285881
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
View related parts
2005 Buick Century Fender Liner, Front Inner Passenger Side Part Number: 10430448
$56.44 MSRP: $84.00
You Save: $27.56 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Liner, Front Fender Inner Wheel House; Fender Splash Shield; Splash Shield
- Position: Front Inner Passenger Side
- Replaces: 10289512, 10298265, 10408452
- Item Weight: 2.20 Pounds
- Item Dimensions: 29.4 x 27.6 x 14.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10430448
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
View related parts
2005 Buick Century Fender Liner, Front Inner Driver Side Part Number: 10430449
$6.37 MSRP: $9.49
You Save: $3.12 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Liner, Front Fender Inner Wheel House; Fender Splash Shield; Splash Shield
- Position: Front Inner Driver Side
- Replaces: 10408454, 10298266, 10289513
- Item Weight: 2.30 Pounds
- Item Dimensions: 30.1 x 28.0 x 14.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10430449
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
View related parts
2005 Buick Century Front Panel, Inner Driver Side Part Number: 10241007
Product Specifications
- Other Name: Extension, Front Fender Inner Wheel House
- Position: Front Inner Driver Side
- Item Weight: 1.60 Pounds
- Item Dimensions: 6.6 x 6.7 x 15.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10241007
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
View related parts
2005 Buick Century Front Panel, Inner Passenger Side Part Number: 10299383
Product Specifications
- Other Name: Extension, Front Fender Inner Wheel House
- Position: Front Inner Passenger Side
- Replaces: 10241006
- Item Weight: 1.60 Pounds
- Item Dimensions: 14.6 x 6.2 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10299383
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS

2005 Buick Century Fender Splash Shield

With a comprehensive array of OEM 2005 Buick Century Fender Splash Shield, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick Century Fender Splash Shield are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Buick Century Fender Splash Shield Parts and Q&A

Q: How to replace the front Fender Splash Shield on 2005 Buick Century?
A: Begin front fender splash shield replacement by removing front bumper fascia bolts from the front fender splash shield and the nut from the stud at the rear of the front fender splash shield before proceeding to dislodge the bolt from the front tab of the front fender splash shield at the lower engine compartment side rail and then eliminating the rear fender bolts. You must remove the components at the rear of the front fender splash shield from the fender after they have been detached. Place the front fender splash shield into the wheelhouse opening by positioning it over the stud and apply a nut at the rear section of the front fender splash shield until it reaches 4 Nm (35 lb in) torque. The installation begins by tightening the front bumper fascia bolts of the front fender splash shield at 2 Nm (18 lb in). The second step includes installing the bolt at the fender's rear side and tightening it to 7 Nm (61 lb in). Fasten and tighten the bolt from the front tab of the front fender splash shield at the lower engine compartment side rail to 4.5 Nm (40 lb in).