How to replace the pushrod and valve rocker arm on 2005 Chevrolet Malibu?

To take off the valve Rocker Arm and push rod, first remove the valve Rocker Arm covers and note any active parts separately for their correct reinsertion. Secondly, take out the Rocker Arm bolts and then the rocker arms and pushrods as well. For the installations, put back the pushrods into the positions and put the ends coated with gm p/n 1052356 or equivalent. The yellow striped intake pushrods are 5 3/4 inches, and the green striped exhaust pushrods are 6 inches in length. Make sure the pushrods fit well in the lifter. After that, install the rocker arms and, depending on the fastener notice, fasten the Rocker Arm bolts to 32 nm (24 ft. Lbs.), etc. Finally, replace the valve rocker covers.

OEM 2005 Chevrolet Malibu Pushrod

Valve Push Rod

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Pushrods found

View related parts
2005 Chevrolet Malibu Push Rods
Part Number: 10166355
$13.11
ADD TO CART
Product Specifications
- Other Name: Rod, Engine Valve Push Rod; Pushrod; Exhaust Push Rod
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.9 x 0.8 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 6
- SKU: 10166355
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Malibu Submodels:
- Base, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ | 6 Cyl 3.1 L GAS, 6 Cyl 3.5 L GAS
View related parts
2005 Chevrolet Malibu Push Rods
Part Number: 10166354
$4.00 MSRP: $6.27
You Save: $2.27 (37%)
Product Specifications
- Other Name: Rod, Engine Valve Push Rod; Pushrod; Intake Push Rod
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.6 x 0.7 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 6
- SKU: 10166354
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Malibu Submodels:
- Base, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ | 6 Cyl 3.1 L GAS, 6 Cyl 3.5 L GAS

2005 Chevrolet Malibu Pushrod

With a comprehensive array of OEM 2005 Chevrolet Malibu Pushrod, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Malibu Pushrod are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Malibu Pushrod Parts Questions & Experts Answers

Q: How to replace the pushrod and valve rocker arm on 2005 Chevrolet Malibu?
A: To take off the valve Rocker Arm and push rod, first remove the valve Rocker Arm covers and note any active parts separately for their correct reinsertion. Secondly, take out the Rocker Arm bolts and then the rocker arms and pushrods as well. For the installations, put back the pushrods into the positions and put the ends coated with gm p/n 1052356 or equivalent. The yellow striped intake pushrods are 5 3/4 inches, and the green striped exhaust pushrods are 6 inches in length. Make sure the pushrods fit well in the lifter. After that, install the rocker arms and, depending on the fastener notice, fasten the Rocker Arm bolts to 32 nm (24 ft. Lbs.), etc. Finally, replace the valve rocker covers.