How to Replace a Power Steering Hose for Pressure Hose on 2005 Chevrolet Uplander?

The first step to replace the power steering pressure pipe/hose requires users to raise and support the vehicle while disconnecting the intermediate shaft from the steering gear to maintain steering control. Place a utility stand behind the frame as support before you disconnect and eliminate the rear bolts enabling the frame lowering process. A drain pan must be positioned beneath the Power Steering Pump and gear before removing both the power steering gear heat shield and hose clip to disconnect the steering gear from the power steering pressure hose. Place a drain pan under the Power Steering Pump and gear before raising the rear of the frame and reinstalling the frame bolts without tightening the pieces. Finally remove the utility stand and lower the vehicle. Subsequently disconnect the power steering pressure hose from the pump while removing the Drive Belt. The raised vehicle enables removal of the Power Steering Hose from its hose retainer followed by the power steering pressure hose extraction. Begin by placing the new power steering pressure hose before lowering the vehicle to connect it to the pump while ensuring a 27 nm(20 ft. Lbs.) torque on the fitting. Follow installation of Power Steering Hose retainer to power steering gear and install the Drive Belt. A utility stand supports the frame assembly after vehicle elevation while frame rear bolts need removal to lower the frame for better accessibility. The steering gear requires the Power Steering Hose connection at 27 nm (20 ft. Lbs.) while you should also install the power steering gear hose clip and heat shield. The rear frame assembly must be raised before reinstallation of frame rear bolts followed by torque application to 165 nm (122 ft. Lbs.). Start by taking off the utility stand then add the intermediate shaft into the steering gear before lowering the vehicle to finish with power steering system bleeding.

OEM 2005 Chevrolet Uplander Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Power Steering Hoses found

View related parts
2005 Chevrolet Uplander Power Steering Cooler Part Number: 15283101
$81.69 MSRP: $129.70
You Save: $48.01 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Power Steering Fluid Cooling; Power Steering Hose; Power Steering Return Hose; Cooling Pipe; Hose, Steering Fluid Cooler
- Item Weight: 1.80 Pounds
- Item Dimensions: 33.8 x 13.4 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15283101
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS
View related parts
2005 Chevrolet Uplander Pipe Kit Part Number: 88963469
$15.20 MSRP: $30.53
You Save: $15.33 (51%)
ADD TO CART
Product Specifications
- Other Name: Pipe Kit, Steering Gear Left; Power Steering Hose; Pipe Kit, Hydraulic Steering Gear Pressure; Pipe Kit, Steering Gear Oil Pressure
- Item Weight: 0.80 Pounds
- Item Dimensions: 10.8 x 5.0 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88963469
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2005 Chevrolet Uplander Power Steering Pressure Hose Part Number: 15777622
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Hydraulic Steering Gear Pressure; Hose, Steering Gear Oil Pressure
- Replaces: 10311306
- Item Weight: 1.80 Pounds
- Item Dimensions: 22.9 x 20.5 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15777622
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2005 Chevrolet Uplander Power Steering Pressure Hose Part Number: 15777209
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Hydraulic Steering Gear Pressure; Hose, Steering Gear Oil Pressure
- Item Weight: 1.80 Pounds
- Item Dimensions: 23.2 x 17.9 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15777209
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2005 Chevrolet Uplander Power Steering Return Hose Part Number: 15293049
Product Specifications
- Other Name: Pipe, Steering Gear Oil Return; Power Steering Hose; Inlet Pipe
- Item Weight: 0.70 Pounds
- Item Dimensions: 23.6 x 4.5 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15293049
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS
View related parts
2005 Chevrolet Uplander Power Steering Cooler Part Number: 15777212
Product Specifications
- Other Name: Hose Assembly-Power Steering Fluid Cooling; Power Steering Hose; Power Steering Return Hose; Cooling Pipe; Hose, Steering Fluid Cooler
- Replaces: 15233978, 15197545
- Item Weight: 1.60 Pounds
- Item Dimensions: 30.7 x 25.8 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15777212
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2005 Chevrolet Uplander Pipe Kit, Driver Side Part Number: 26081830
Product Specifications
- Other Name: Pipe Kit, Steering Gear; Power Steering Hose; Pressure Line; Line Kit; Line; Pipe Kit, Hydraulic Steering Gear Pressure; Pipe Kit, Steering Gear Oil Pressure
- Position: Driver Side
- Item Weight: 0.60 Pounds
- Item Dimensions: 10.7 x 3.7 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26081830
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2005 Chevrolet Uplander Pipe Kit, Passenger Side Part Number: 26081831
Product Specifications
- Other Name: Pipe Kit, Steering Gear; Power Steering Hose; Pressure Line; Line Kit; Line; Pipe Kit, Hydraulic Steering Gear Pressure; Pipe Kit, Steering Gear Oil Pressure
- Position: Passenger Side
- Item Weight: 0.60 Pounds
- Item Dimensions: 18.2 x 3.1 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26081831
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2005 Chevrolet Uplander Pipe Kit Part Number: 88963470
Product Specifications
- Other Name: Pipe Kit, Hydraulic Steering Gear Pressure; Power Steering Hose; Pipe Kit, Steering Gear Oil Pressure
- Position: Passenger Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 18.5 x 4.8 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88963470
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2005 Chevrolet Uplander Power Steering Hose

With a comprehensive array of OEM 2005 Chevrolet Uplander Power Steering Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Uplander Power Steering Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Uplander Power Steering Hose Parts and Q&A

Q: How to Replace a Power Steering Hose for Pressure Hose on 2005 Chevrolet Uplander?
A: The first step to replace the power steering pressure pipe/hose requires users to raise and support the vehicle while disconnecting the intermediate shaft from the steering gear to maintain steering control. Place a utility stand behind the frame as support before you disconnect and eliminate the rear bolts enabling the frame lowering process. A drain pan must be positioned beneath the Power Steering Pump and gear before removing both the power steering gear heat shield and hose clip to disconnect the steering gear from the power steering pressure hose. Place a drain pan under the Power Steering Pump and gear before raising the rear of the frame and reinstalling the frame bolts without tightening the pieces. Finally remove the utility stand and lower the vehicle. Subsequently disconnect the power steering pressure hose from the pump while removing the Drive Belt. The raised vehicle enables removal of the Power Steering Hose from its hose retainer followed by the power steering pressure hose extraction. Begin by placing the new power steering pressure hose before lowering the vehicle to connect it to the pump while ensuring a 27 nm(20 ft. Lbs.) torque on the fitting. Follow installation of Power Steering Hose retainer to power steering gear and install the Drive Belt. A utility stand supports the frame assembly after vehicle elevation while frame rear bolts need removal to lower the frame for better accessibility. The steering gear requires the Power Steering Hose connection at 27 nm (20 ft. Lbs.) while you should also install the power steering gear hose clip and heat shield. The rear frame assembly must be raised before reinstallation of frame rear bolts followed by torque application to 165 nm (122 ft. Lbs.). Start by taking off the utility stand then add the intermediate shaft into the steering gear before lowering the vehicle to finish with power steering system bleeding.