What Tools Are Required to Service and Repair the Brake Disc, and What Are the Key Considerations for Refinishing on 2005 GMC Sierra 1500?

Two basic kits are needed for disc and wheel hub services - Disc Resurfacing Kit (J41013) and Wheel Hub Resurfacing Kit (J42450-A). Regular brake service does not include disc refinement and new discs should not get refinished for brake system noise or other small issues. The technician needs to measure the disc thickness to confirm it remains above the lowest permitted limit before any refinishing happens. You need to refinish the discs only when the material buildup, rust, cracks, color changes, or depth marks exceed approved tolerances. You must prepare the hub/axle flange and brake disc mating surfaces for resurfacing by removing all rust and debris using Wheel Hub Resurfacing Kit (J42450-A) and Disc Resurfacing Kit (J41013). Place the brake disc on the brake lathe while checking for any dirt or contamination on its mating surfaces. Put the cutting tools to work on the rotating disc surface during lathe operation to create a witness mark; replace the disc if the mark reaches less than three-fourths of its circumference. Use the lathe manufacturer's procedure to restore the disc surface while checking thickness at each stage. The damaged disc must be replaced when its minimum thickness limit is reached. For a non-directional disc surface you should set your tool to the recommended speed and work with 120 grit aluminum oxide sandpaper when using a non-directional finishing tool or 150 grit sandpaper when using a sanding block. Wipe denatured alcohol or brake cleaner on friction surfaces then measure assembled LRO to ready disc brakes for service by correcting any necessary runout values.

OEM 2005 GMC Sierra 1500 Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Brake Discs found

View related parts
2005 GMC Sierra 1500 Brake Rotor
Part Number: 25757802
$139.37 MSRP: $268.83
You Save: $129.46 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor, Front And Rear Wheel Brake; Rotor
- Position: Rear
- Replaces: 15712802, 15065077
- Item Weight: 18.50 Pounds
- Item Dimensions: 16.7 x 16.1 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 25757802
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Sierra 1500 Submodels:
- Base, C3, Denali, HT, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
2005 GMC Sierra 1500 Rotor
Part Number: 15712803
$131.08 MSRP: $250.60
You Save: $119.52 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor, Front And Rear Wheel Brake; Brake Rotor
- Position: Rear
- Item Weight: 30.00 Pounds
- Item Dimensions: 16.5 x 17.0 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15712803
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Sierra 1500 Submodels:
- Base, Denali, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2005 GMC Sierra 1500 Rotor
Part Number: 15712801
$96.36 MSRP: $180.93
You Save: $84.57 (47%)
ADD TO CART
Product Specifications
- Other Name: Rotor, Front And Rear Wheel Brake; Brake Rotor
- Position: Rear
- Item Weight: 13.40 Pounds
- Item Dimensions: 15.9 x 16.6 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15712801
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Sierra 1500 Submodels:
- Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2005 GMC Sierra 1500 Rotor, Front
Part Number: 15942195
$152.90 MSRP: $296.76
You Save: $143.86 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor-Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Replaces: 15718986, 18060215
- Item Weight: 27.20 Pounds
- Item Dimensions: 13.6 x 14.0 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15942195
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Sierra 1500 Submodels:
- Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
2005 GMC Sierra 1500 Rotor, Front
Part Number: 22950036
$131.59 MSRP: $257.65
You Save: $126.06 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor-Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Replaces: 88963556, 25819670
- Item Weight: 29.40 Pounds
- Item Dimensions: 13.9 x 14.2 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22950036
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Sierra 1500 Submodels:
- Base, Denali, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2005 GMC Sierra 1500 Rotor, Front
Part Number: 19210603
$94.27 MSRP: $182.96
You Save: $88.69 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor, Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Replaces: 18060214
- Item Weight: 20.40 Pounds
- Item Dimensions: 13.4 x 13.0 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19210603
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Sierra 1500 Submodels:
- Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
2005 GMC Sierra 1500 Rotor
Part Number: 19211496
Product Specifications
- Other Name: Rotor, Front And Rear Wheel Brake; Brake Rotor
- Position: Rear
- Replaces: 15712800
- Item Weight: 18.40 Pounds
- Item Dimensions: 16.2 x 16.1 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19211496
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Sierra 1500 Submodels:
- Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS

2005 GMC Sierra 1500 Brake Disc

With a comprehensive array of OEM 2005 GMC Sierra 1500 Brake Disc, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 GMC Sierra 1500 Brake Disc are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 GMC Sierra 1500 Parts Questions & Experts Answers

Q: What Tools Are Required to Service and Repair the Brake Disc, and What Are the Key Considerations for Refinishing on 2005 GMC Sierra 1500?
A: Two basic kits are needed for disc and wheel hub services - Disc Resurfacing Kit (J41013) and Wheel Hub Resurfacing Kit (J42450-A). Regular brake service does not include disc refinement and new discs should not get refinished for brake system noise or other small issues. The technician needs to measure the disc thickness to confirm it remains above the lowest permitted limit before any refinishing happens. You need to refinish the discs only when the material buildup, rust, cracks, color changes, or depth marks exceed approved tolerances. You must prepare the hub/axle flange and brake disc mating surfaces for resurfacing by removing all rust and debris using Wheel Hub Resurfacing Kit (J42450-A) and Disc Resurfacing Kit (J41013). Place the brake disc on the brake lathe while checking for any dirt or contamination on its mating surfaces. Put the cutting tools to work on the rotating disc surface during lathe operation to create a witness mark; replace the disc if the mark reaches less than three-fourths of its circumference. Use the lathe manufacturer's procedure to restore the disc surface while checking thickness at each stage. The damaged disc must be replaced when its minimum thickness limit is reached. For a non-directional disc surface you should set your tool to the recommended speed and work with 120 grit aluminum oxide sandpaper when using a non-directional finishing tool or 150 grit sandpaper when using a sanding block. Wipe denatured alcohol or brake cleaner on friction surfaces then measure assembled LRO to ready disc brakes for service by correcting any necessary runout values.