How to replace the brake line using the J45405 Pipe Flaring Tool Kit on 2006 Cadillac DTS?

Apply the J45405 Pipe Flaring Tool Kit (J45405) for brake pipe replacements while observing brake fluid irritant safety measures and implementing double-walled steel brake pipes to avert system failure. The first step involves checking the replacement area of brake pipe then unsecuring it from any retainers based on need. Determine the total length of the pipe replacement area with bends present then account for the proper flare length of 6.35 mm (0.250 inch) for 4.76 mm (3/16 inch) diameter pipes. Cut the brake pipe straight to its precise dimension by using the included pipe cutter on the J45405. Use suitable brake pipe and tube nut sizes then remove nylon coatings from flare ends with the included coating stripper from J45405 before using the de-burring tool to chamfer inside and outside pipe diameters. Begin by installing tube nuts followed by cleaning both the brake pipe and J45405 device from contaminants. Move to prepping the dies by opening the clamp screw and placing die halves into their die cage. Insert the ready pipe into the dies, tighten their clamping screw while forming the flare with the supplied mandrel. A correct shape and diameter check should be performed on the newly-formed flare which needs to measure 7.10 mm (0.279 inch) with a tolerance range of 0.18 mm (0.007 inch) for 4.76 mm (3/16 inch) diameter pipe. After proper pipe shaping using the right brake pipe bending tool, install the pipe through unions and retainers to the vehicle before bleeding the hydraulic brake system followed by a leak check while engine operation and brake application under assistance.

OEM 2006 Cadillac DTS Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Brake Lines found

View related parts
2006 Cadillac DTS Flex Hose, Front Passenger Side Part Number: 19366678
$30.73 MSRP: $57.67
You Save: $26.94 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 15850972
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.1 x 2.1 x 18.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366678
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
2006 Cadillac DTS Flex Hose, Front Driver Side Part Number: 19366720
$30.67 MSRP: $57.59
You Save: $26.92 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 15937523
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.2 x 2.0 x 20.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366720
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
2006 Cadillac DTS Flex Hose Part Number: 15230030
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear
- Replaced by: 19366672
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.1 x 11.2 x 1.1 inches
- Condition: New
- SKU: 15230030
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
2006 Cadillac DTS Flex Hose, Front Part Number: 19366674
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front
- Replaces: 15230037
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.1 x 19.4 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366674
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
2006 Cadillac DTS Flex Hose, Front Part Number: 19366673
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front
- Replaces: 15230036
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.1 x 19.2 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366673
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
2006 Cadillac DTS Flex Hose, Rear Part Number: 19366671
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Replaces: 15230029
- Item Weight: 0.60 Pounds
- Item Dimensions: 11.4 x 3.1 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366671
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
2006 Cadillac DTS Flex Hose, Rear Driver Side Part Number: 19366676
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Driver Side
- Replaces: 15283581
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.0 x 13.8 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366676
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
2006 Cadillac DTS Flex Hose, Rear Passenger Side Part Number: 19366677
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Passenger Side
- Replaces: 15283582
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.1 x 13.8 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366677
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS

2006 Cadillac DTS Brake Line

With a comprehensive array of OEM 2006 Cadillac DTS Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Cadillac DTS Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Cadillac DTS Brake Line Parts and Q&A

Q: How to replace the brake line using the J45405 Pipe Flaring Tool Kit on 2006 Cadillac DTS?
A: Apply the J45405 Pipe Flaring Tool Kit (J45405) for brake pipe replacements while observing brake fluid irritant safety measures and implementing double-walled steel brake pipes to avert system failure. The first step involves checking the replacement area of brake pipe then unsecuring it from any retainers based on need. Determine the total length of the pipe replacement area with bends present then account for the proper flare length of 6.35 mm (0.250 inch) for 4.76 mm (3/16 inch) diameter pipes. Cut the brake pipe straight to its precise dimension by using the included pipe cutter on the J45405. Use suitable brake pipe and tube nut sizes then remove nylon coatings from flare ends with the included coating stripper from J45405 before using the de-burring tool to chamfer inside and outside pipe diameters. Begin by installing tube nuts followed by cleaning both the brake pipe and J45405 device from contaminants. Move to prepping the dies by opening the clamp screw and placing die halves into their die cage. Insert the ready pipe into the dies, tighten their clamping screw while forming the flare with the supplied mandrel. A correct shape and diameter check should be performed on the newly-formed flare which needs to measure 7.10 mm (0.279 inch) with a tolerance range of 0.18 mm (0.007 inch) for 4.76 mm (3/16 inch) diameter pipe. After proper pipe shaping using the right brake pipe bending tool, install the pipe through unions and retainers to the vehicle before bleeding the hydraulic brake system followed by a leak check while engine operation and brake application under assistance.