How to replace the rear crankshaft seal on 2006 Cadillac DTS?

In order to change the crankshaft rear oil seal, one has to take off the flywheel and then fasten the oil seal with Rear Oil Seal Remover. Put self-drilling screws in the seal and then a center forcing screw is inserted to tear the seal away. Clean, Gasket Maker, and lubricate the seal then reinstall it and flywheel.

OEM 2006 Cadillac DTS Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Seal found

View related parts
2006 Cadillac DTS Rear Main Seal Part Number: 12568025
$53.23 MSRP: $90.63
You Save: $37.40 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Crankshaft Rear Main Bearing Cap; Crankshaft Seal; Seal, Engine Rear Main Bearing
- Position: Rear
- Replaces: 12556355, 12556107
- Item Weight: 0.40 Pounds
- Item Dimensions: 5.2 x 5.3 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12568025
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS

2006 Cadillac DTS Crankshaft Seal

With a comprehensive array of OEM 2006 Cadillac DTS Crankshaft Seal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Cadillac DTS Crankshaft Seal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Cadillac DTS Crankshaft Seal Parts and Q&A

Q: How to replace the rear crankshaft seal on 2006 Cadillac DTS?
A: In order to change the crankshaft rear oil seal, one has to take off the flywheel and then fasten the oil seal with Rear Oil Seal Remover. Put self-drilling screws in the seal and then a center forcing screw is inserted to tear the seal away. Clean, Gasket Maker, and lubricate the seal then reinstall it and flywheel.