How to service and repair a coil springs and shock absorber on 2006 Cadillac STS?

Service and shock absorber repairs begin by elevating and stabilizing the vehicle with caution toward the coil springs to protect their protective coating from getting damaged thus leading to early failure. Pick the tire along with its wheel off before separating the shock module of the vehicle for placement inside the spring compressor. Follow the assembly of the upper Control Arm with its insulator as a reference for installation before turning the spring compressor forcing screw until the coil spring becomes compressed while letting the shock absorber operate freely. After the driver conducts the removal of the magnaride sensor nut and shock absorber upper retaining nut the shock absorber can be extracted from the shock module. Adjust the forcing screw of the compressor to remove the upper mounting plate and coil spring as well as the upper Control Arm Bracket assembly and insulator. Installation first requires the placement of coil spring along with insulator and shock absorber and upper Control Arm Bracket assembly inside the spring compressor. Users must achieve proper alignment of all marks while positioning the alignment pins in the upper Control Arm Bracket directly facing shock absorber lower mounting holes at 90 degrees. Compare the coil spring length by using the spring compressor to turn its forcing screw before tightening the shock absorber retaining nut to 25 nm (18 ft. Lbs.) and installing the magnaride sensor nut. Once the shock module leaves the spring compressor you should reinstall it on the vehicle before reattaching the tire and wheel while lowering the car.

OEM 2006 Cadillac STS Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Shock Absorbers found

View related parts
2006 Cadillac STS Shock, Driver Side
Part Number: 19302795
$495.98 MSRP: $962.60
You Save: $466.62 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber, Front And Rear Suspension; Shock Absorber
- Position: Driver Side
- Replaces: 89060191
- Item Weight: 11.80 Pounds
- Item Dimensions: 6.3 x 6.2 x 28.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19302795
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac STS Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2006 Cadillac STS Shock Absorber, Front
Part Number: 19180778
$526.42 MSRP: $952.80
You Save: $426.38 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Kit, Front Shock; Strut; Absorber Kit, Front And Rear Suspension
- Position: Front
- Replaces: 19181632, 19121865, 19177765
- Item Weight: 8.10 Pounds
- Item Dimensions: 31.5 x 8.1 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19180778
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac STS Submodels:
- Base, Platinum | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2006 Cadillac STS Shock Absorber, Rear Upper
Part Number: 15938719
$115.89 MSRP: $209.74
You Save: $93.85 (45%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly-Rear Shock (W/Upper Mount); Absorber, Front And Rear Suspension
- Position: Rear Upper
- Replaces: 15289216
- Item Weight: 10.00 Pounds
- Item Dimensions: 27.8 x 6.7 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15938719
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac STS Submodels:
- Base | 6 Cyl 3.6 L GAS
View related parts
2006 Cadillac STS Shock Absorber, Front
Part Number: 19181633
$69.15 MSRP: $159.66
You Save: $90.51 (57%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Kit, Front Shock; Strut; Absorber Kit, Front And Rear Suspension
- Position: Front
- Replaces: 19177764, 19121992, 19181635, 19180577, 88966973
- Item Weight: 0.30 Pounds
- Item Dimensions: 28.1 x 8.3 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19181633
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac STS Submodels:
- Base, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS
View related parts
2006 Cadillac STS Shock Absorber, Rear Upper
Part Number: 25769669
$326.97 MSRP: $634.59
You Save: $307.62 (49%)
ADD TO CART
Product Specifications
- Other Name: Absorber, Rear Shock (W/Upper Mount); Shock; Absorber, Front And Rear Suspension
- Position: Rear Upper
- Item Weight: 9.40 Pounds
- Item Dimensions: 27.0 x 6.8 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25769669
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac STS Submodels:
- Base, Platinum | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2006 Cadillac STS Strut, Driver Side
Part Number: 25766002
$211.25 MSRP: $332.39
You Save: $121.14 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber, Front And Rear Suspension; Shock Absorber
- Position: Driver Side
- Item Weight: 24.00 Pounds
- Item Dimensions: 31.4 x 13.7 x 13.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25766002
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac STS Submodels:
- Base | 6 Cyl 3.6 L GAS
View related parts
2006 Cadillac STS Shock Absorber, Rear Upper
Part Number: 15145723
$234.10 MSRP: $433.11
You Save: $199.01 (46%)
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly-Rear Shock (W/Upper Mount); Shock; Absorber, Front And Rear Suspension
- Position: Rear Upper
- Item Weight: 23.80 Pounds
- Item Dimensions: 28.0 x 6.0 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15145723
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac STS Submodels:
- Base | 6 Cyl 3.6 L GAS
View related parts
2006 Cadillac STS Shock Absorber, Front
Part Number: 19181634
Product Specifications
- Other Name: Absorber Kit, Front Shock; Strut; Absorber Kit, Front And Rear Suspension
- Position: Front
- Replaces: 19177766, 89060237, 19177767, 19180738, 89060238
- Item Weight: 2.80 Pounds
- Item Dimensions: 26.9 x 8.4 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19181634
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac STS Submodels:
- Base, Platinum | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2006 Cadillac STS Shock Absorber, Rear Upper
Part Number: 15231721
Product Specifications
- Other Name: Absorber Assembly-Rear Shock (W/Upper Mount); Shock; Absorber, Front And Rear Suspension
- Position: Rear Upper
- Item Weight: 8.20 Pounds
- Item Dimensions: 7.1 x 6.3 x 34.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15231721
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac STS Submodels:
- V | 8 Cyl 4.4 L GAS
View related parts
2006 Cadillac STS Shock, Passenger Side
Part Number: 19302796
$520.20 MSRP: $937.30
You Save: $417.10 (45%)
Product Specifications
- Other Name: Absorber, Front And Rear Suspension; Shock Absorber
- Position: Passenger Side
- Replaces: 89060192
- Item Weight: 11.10 Pounds
- Item Dimensions: 6.3 x 6.1 x 29.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19302796
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac STS Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2006 Cadillac STS Strut, Passenger Side
Part Number: 25766003
$226.29 MSRP: $356.05
You Save: $129.76 (37%)
Product Specifications
- Other Name: Absorber, Front And Rear Suspension; Shock Absorber
- Position: Passenger Side
- Item Weight: 23.80 Pounds
- Item Dimensions: 30.2 x 13.8 x 14.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25766003
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac STS Submodels:
- Base | 6 Cyl 3.6 L GAS
View related parts
2006 Cadillac STS Shock Absorber, Front
Part Number: 19300078
Product Specifications
- Other Name: Absorber Kit, Front Shock; Strut; Absorber Kit, Front And Rear Suspension
- Position: Front
- Replaces: 88964547
- Item Weight: 7.40 Pounds
- Item Dimensions: 6.2 x 6.2 x 29.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19300078
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac STS Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2006 Cadillac STS Shock Absorber, Rear Upper
Part Number: 15238517
Product Specifications
- Other Name: Absorber Assembly-Rear Shock (W/Upper Mount); Shock; Absorber, Front And Rear Suspension
- Position: Rear Upper
- Replaces: 25713754
- Item Weight: 9.60 Pounds
- Item Dimensions: 9.5 x 8.3 x 31.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15238517
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac STS Submodels:
- Base, Platinum | 8 Cyl 4.6 L GAS

2006 Cadillac STS Shock Absorber

With a comprehensive array of OEM 2006 Cadillac STS Shock Absorber, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Cadillac STS Shock Absorber are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Cadillac STS Parts Questions & Experts Answers

Q: How to service and repair a coil springs and shock absorber on 2006 Cadillac STS?
A: Service and shock absorber repairs begin by elevating and stabilizing the vehicle with caution toward the coil springs to protect their protective coating from getting damaged thus leading to early failure. Pick the tire along with its wheel off before separating the shock module of the vehicle for placement inside the spring compressor. Follow the assembly of the upper Control Arm with its insulator as a reference for installation before turning the spring compressor forcing screw until the coil spring becomes compressed while letting the shock absorber operate freely. After the driver conducts the removal of the magnaride sensor nut and shock absorber upper retaining nut the shock absorber can be extracted from the shock module. Adjust the forcing screw of the compressor to remove the upper mounting plate and coil spring as well as the upper Control Arm Bracket assembly and insulator. Installation first requires the placement of coil spring along with insulator and shock absorber and upper Control Arm Bracket assembly inside the spring compressor. Users must achieve proper alignment of all marks while positioning the alignment pins in the upper Control Arm Bracket directly facing shock absorber lower mounting holes at 90 degrees. Compare the coil spring length by using the spring compressor to turn its forcing screw before tightening the shock absorber retaining nut to 25 nm (18 ft. Lbs.) and installing the magnaride sensor nut. Once the shock module leaves the spring compressor you should reinstall it on the vehicle before reattaching the tire and wheel while lowering the car.

Related 2006 Cadillac STS Parts

Alternate Year Models

2005 Cadillac STS Shock Absorber 2007 Cadillac STS Shock Absorber