OEM 2006 Chevrolet Corvette Steering Wheel

2006 Chevrolet Corvette Steering Wheel Parts Questions & Experts Answers

• Q: How to replace the steering wheel on 2006 Chevrolet Corvette?

  A: Remove the Steering Wheel inflator module and horn electrical connector initially before beginning replacement activities. Install the steering column lock pin (J 42640) to the steering column before you can remove the Steering Wheel set nut which needs disposal. After attaching the Steering Wheel puller legs (J 4120) and the Steering Wheel puller (J 1859-A) to the Steering Wheel using the center screw to clamp down against the steering column shaft the wheel will separate from the shaft. Use the puller tools to remove them from the Steering Wheel. The Steering Wheel installation process begins by placing the wheel onto the steering column where the marks should line up correctly before you apply a new Steering Wheel set nut and torque it to 41 nm (30 ft. Lbs.). To complete installation unplug the steering column lock pin (J 42640) while installing the horn electrical connector and Steering Wheel inflator module.