How to replace the Steering Angle Sensor on 2006 Chevrolet Corvette?

Begin sensor replacement by disabling the sir system while carefully following the sir caution in service precautions. Proceed by first extracting the Steering Column from the vehicle and subsequently removing the steering shaft seal followed by sensor retainer and sensor assembly. A reused sensor requires centering operations before extraction occurs. The next steps involve removing the adapter and bearing assembly and the lower spring retainer. The installation process begins with adapter and bearing assembly attachment to steering shaft assembly followed by installing the lower spring retainer onto adapter and bearing assembly. Position the Steering Angle Sensor assembly onto the steering shaft assembly then install the sensor retainer along with its seal. Check that the sensor is positioned correctly before installation then turn the steering shaft assembly to face its 12 o'clock position. Set the Steering Column into the vehicle then reactivate the sir system.

OEM 2006 Chevrolet Corvette Steering Angle Sensor

Steering Column Angle Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Steering Angle Sensors found

View related parts
2006 Chevrolet Corvette Position Sensor
Part Number: 15231656
$118.46 MSRP: $186.40
You Save: $67.94 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Steering Column; Steering Wheel Speed Sensor; Steering Angle Sensor; Sensor
- Replaces: 26069756, 88965535
- Item Weight: 0.40 Pounds
- Item Dimensions: 5.4 x 4.3 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15231656
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Corvette Submodels:
- 427 Limited Edition Z06, Base, Z06, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2006 Chevrolet Corvette Position Sensor
Part Number: 15231652
$106.08 MSRP: $166.15
You Save: $60.07 (37%)
Product Specifications
- Other Name: Sensor, Steering Column; Steering Wheel Speed Sensor; Steering Angle Sensor; Sensor
- Replaces: 26059045, 88965330
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.9 x 3.2 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15231652
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Corvette Submodels:
- 427 Limited Edition Z06, Base, Z06, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS

2006 Chevrolet Corvette Steering Angle Sensor

With a comprehensive array of OEM 2006 Chevrolet Corvette Steering Angle Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Corvette Steering Angle Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Corvette Steering Angle Sensor Parts Questions & Experts Answers

Q: How to replace the Steering Angle Sensor on 2006 Chevrolet Corvette?
A: Begin sensor replacement by disabling the sir system while carefully following the sir caution in service precautions. Proceed by first extracting the Steering Column from the vehicle and subsequently removing the steering shaft seal followed by sensor retainer and sensor assembly. A reused sensor requires centering operations before extraction occurs. The next steps involve removing the adapter and bearing assembly and the lower spring retainer. The installation process begins with adapter and bearing assembly attachment to steering shaft assembly followed by installing the lower spring retainer onto adapter and bearing assembly. Position the Steering Angle Sensor assembly onto the steering shaft assembly then install the sensor retainer along with its seal. Check that the sensor is positioned correctly before installation then turn the steering shaft assembly to face its 12 o'clock position. Set the Steering Column into the vehicle then reactivate the sir system.