How to service and repair the Steering Angle Sensor on Chevrolet Corvette?

Identify the type of steering wheel position sensor to be removed before servicing and repairing the Steering Angle Sensor. Test the sensor type and remember that the front of the sensor connector will be on the right when you are holding the process, from the technician's perspective. In case of reusing the already existing sensor, there is no necessity of alignment prior to removal. Pull out the sensor connector and take out the sensor from the adapter and bearing assembly. If you are reusing the sensor, create an alignment mark on the flush rotor flange cuff [before removal] to prevent misalignment when installing the cuff again. For installation, if using a new sensor it comes along with a pin installed; do not pull off the pin until the sensor has found its place. Position the sensor to match the Steering Shaft and insert it into the adapter and bearing assembly and make sure the connector connects successfully. Features of the front of the sensor include a foam ring , a pin hole for the centering pin, a flushed rotor flange cuff and an alignment mark for installation. In case reuse of existing sensor, make sure that the marking on the flush rotor flange cuff is brought to the parallel position until the sensor is fully seated. Repeat the process of alignment and installation for each variant of the sensor, taking special note of the particular features and alignment marks so as to accurately install.

How to replace the Steering Angle Sensor or Steering Shaft Lower Bearing on Chevrolet Corvette?

To replace the Steering Wheel Position Sensor or Steering Shaft Lower Bearing, you will first have to disable the SIR System, remove the steering shaft seal, sensor retainer, sensor assembly, and adapter, and bearing assembly. For installation, you should start by fitting the adapter and the bearing assembly to the steering shaft and rotate the steering shaft assembly while in the 12 o'clock position before fitting the sensor assembly, followed by the sensor retainer and steering shaft seal. Finally, enable the SIR system.

OEM Chevrolet Corvette Steering Angle Sensor

Steering Column Angle Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Steering Angle Sensors found

View related parts
Chevrolet Corvette Position Sensor Part Number: 13589991
$41.83 MSRP: $116.38
You Save: $74.55 (65%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Steering Gear Hydraulic Valve; Steering Wheel Speed Sensor; Steering Angle Sensor; Angle Sensor; Steering Sensor Assembly
- Replaces: 13579709, 13589257, 13584209, 13513905
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Corvette | Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Position Sensor Part Number: 26058286
Product Specifications
- Other Name: Sensor, Steering Column; Steering Wheel Speed Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2000 Chevrolet Corvette | Base | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Position Sensor Part Number: 15231652
$106.08 MSRP: $166.15
You Save: $60.07 (37%)
Product Specifications
- Other Name: Sensor, Steering Column; Steering Wheel Speed Sensor; Steering Angle Sensor; Sensor
- Replaces: 26059045, 88965330
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2009 Chevrolet Corvette | 427 Limited Edition Z06, Base, Z06, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Corvette Position Sensor Part Number: 88965543
$123.83 MSRP: $194.85
You Save: $71.02 (37%)
Product Specifications
- Other Name: Sensor, Steering Column; Steering Wheel Speed Sensor; Steering Angle Sensor; Sensor, Steering Gear Hydraulic Valve
- Replaces: 26059047
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2004 Chevrolet Corvette | 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Z06 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Position Sensor Part Number: 15231656
$118.46 MSRP: $186.40
You Save: $67.94 (37%)
Product Specifications
- Other Name: Sensor, Steering Column; Steering Wheel Speed Sensor; Steering Angle Sensor; Sensor
- Replaces: 26069756, 88965535
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2009 Chevrolet Corvette | 427 Limited Edition Z06, Base, Z06, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Corvette Position Sensor Part Number: 26055808
Product Specifications
- Other Name: Sensor, Steering Column; Steering Wheel Speed Sensor; Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1998 Chevrolet Corvette | Base, Indianapolis 500 Pace Car | 8 Cyl 5.7 L GAS

Chevrolet Corvette Steering Angle Sensor

Want to cut long-term maintenance and repair costs? Choose OEM Steering Angle Sensor. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Corvette parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Corvette Steering Angle Sensor includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Corvette Steering Angle Sensor is an important part which greatly improves the functionality of Chevrolet Corvette cars. Regarded as one of the most trustworthy, this sensor produces signals on the steering angle needed for Electronic Stability Control (ESC). Together with yaw and ABS wheel speed sensors, the Chevrolet Corvette Steering Angle Sensor enhances control of the car movements contributing to effective control of the brakes and avoiding the loss of control in a dynamic mode of the car. Serving all eight generations of Corvette, this sensor is compatible with new advancements in the technology worldwide to help both the performance enthusiast as well as the ordinary driver. The Chevrolet Corvette Steering Angle Sensor also has electronic controls that alters the power steering help as per speed as well as input, which is excellent for tenderness as well as road feel. This integration is helpful not only in driving efficiency but also in driving safety and is considered the pillar of most automobiles in the market. The Steering Angle Sensor thus becomes very crucial with the Chevrolet Corvette transition to an intermediate rear-wheel drive in 2020. In conclusion, the Chevrolet Corvette Steering Angle Sensor is an epitome of the qualities that Chevrolet has shown it possesses in terms of the production of performance oriented, reliable, and technologically improved sports cars.

Chevrolet Corvette Steering Angle Sensor Parts and Q&A

Position Sensor
88965543
Q: How to service and repair the Steering Angle Sensor on Chevrolet Corvette?
A:
Identify the type of steering wheel position sensor to be removed before servicing and repairing the Steering Angle Sensor. Test the sensor type and remember that the front of the sensor connector will be on the right when you are holding the process, from the technician's perspective. In case of reusing the already existing sensor, there is no necessity of alignment prior to removal. Pull out the sensor connector and take out the sensor from the adapter and bearing assembly. If you are reusing the sensor, create an alignment mark on the flush rotor flange cuff [before removal] to prevent misalignment when installing the cuff again. For installation, if using a new sensor it comes along with a pin installed; do not pull off the pin until the sensor has found its place. Position the sensor to match the Steering Shaft and insert it into the adapter and bearing assembly and make sure the connector connects successfully. Features of the front of the sensor include a foam ring , a pin hole for the centering pin, a flushed rotor flange cuff and an alignment mark for installation. In case reuse of existing sensor, make sure that the marking on the flush rotor flange cuff is brought to the parallel position until the sensor is fully seated. Repeat the process of alignment and installation for each variant of the sensor, taking special note of the particular features and alignment marks so as to accurately install.
Position Sensor
15231652
Q: How to replace the Steering Angle Sensor or Steering Shaft Lower Bearing on Chevrolet Corvette?
A:
To replace the Steering Wheel Position Sensor or Steering Shaft Lower Bearing, you will first have to disable the SIR System, remove the steering shaft seal, sensor retainer, sensor assembly, and adapter, and bearing assembly. For installation, you should start by fitting the adapter and the bearing assembly to the steering shaft and rotate the steering shaft assembly while in the 12 o'clock position before fitting the sensor assembly, followed by the sensor retainer and steering shaft seal. Finally, enable the SIR system.