OEM 2008 Chevrolet Equinox Oil Filter

2008 Chevrolet Equinox Parts Questions & Experts Answers

• Q: How to replace the engine oil and oil filter on 2008 Chevrolet Equinox?

  A: The first step to change engine oil and its filter consists of raising a vehicle while providing support. A drain pan should be placed beneath the engine oil Drain Plug before removing it. Examine and clean the Drain Plug before replacing it when needed while inspecting the Oil Pan sealing surface for repair or replacement of the pan if necessary. The first step includes removing the existing Oil Filter while cleaning the adapter where the Oil Filter rests. If the adapter requires repair or needs replacement you should perform those tasks. Before installing the new Oil Filter use clean oil to lubricate the gasket then secure it using hand pressure to 3/4 to 1 full turn after its contact with the adapter surface. The engine oil Drain Plug must be installed with 25 n.m (18 lb ft) of torque. Start by removing the drain pan then lower the vehicle before taking out the oil fill cap from the rocker arm cover. Complete the engine with fresh engine oil before putting back the oil fill cap that belongs on the rocker arm cover.