How to replace the intermediate steering column seal on 2009 Cadillac STS?

Start by removing the Steering Column together with the upper intermediate shaft according to the correct replacement instructions which cover both jl7 configurations based on their presence or absence. Remove the intermediate shaft seal from the mod plate during the maintenance operation. Position the new intermediate shaft seal on the mod plate after making sure it forms a tight seal with both the intermediate shaft seal and mod plate. Return the Steering Column through the correct installation sequence determined by the two different configurations. The sir system needs to become enabled to finish the process.

OEM 2009 Cadillac STS Steering Column Seal

Steering Column to Firewall Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Steering Column Seal found

View related parts
2009 Cadillac STS Lower Cover
Part Number: 26064593
Product Specifications
- Other Name: Seal, Steering Column; Coupling Shield; Seal; Boot
- Item Weight: 1.00 Pounds
- Item Dimensions: 10.1 x 4.2 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26064593
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

2009 Cadillac STS Steering Column Seal

With a comprehensive array of OEM 2009 Cadillac STS Steering Column Seal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Cadillac STS Steering Column Seal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Cadillac STS Parts Questions & Experts Answers

Q: How to replace the intermediate steering column seal on 2009 Cadillac STS?
A: Start by removing the Steering Column together with the upper intermediate shaft according to the correct replacement instructions which cover both jl7 configurations based on their presence or absence. Remove the intermediate shaft seal from the mod plate during the maintenance operation. Position the new intermediate shaft seal on the mod plate after making sure it forms a tight seal with both the intermediate shaft seal and mod plate. Return the Steering Column through the correct installation sequence determined by the two different configurations. The sir system needs to become enabled to finish the process.