How to replace the front wheel bearing and hub on an AWD on 2009 Cadillac STS?

Users need to lift up and sustain the vehicle at first, withdraw the tire and wheel to replace the front Wheel Bearing and hub in awd vehicles. First remove the brake rotor then get rid of the wheel driveshaft retaining nut. Disconnect the abs connector under the splash shield and take care to avoid the boot area while removing Wheel Bearing bolts to keep the parts safe. Install tool j 45859 or an equivalent device to match the Wheel Bearing/hub profile and use it to disconnect the wheel driveshaft from the assembly before removing the Wheel Bearing/hub itself. To put in the new Wheel Bearing hub section combine these elements: place the added Wheel Bearing/hub and tighten the mounting bolts to 135 nm (100 lb ft) while joining the abs electrical connector with the splash shield. Put on a fresh wheel driveshaft retaining nut and torque it to 160 nm (118 lb ft) before replacing the brake rotor and tire along with wheel. Finally, lower the vehicle.

OEM 2009 Cadillac STS Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Wheel Bearings found

View related parts
2009 Cadillac STS Hub & Bearing, Front
Part Number: 12413103
$105.64 MSRP: $198.37
You Save: $92.73 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub, Front Wheel; Wheel Bearing and Hub Assembly; ABS Sensor; Repair Kit.; Front Speed Sensor
- Position: Front
- Item Weight: 8.80 Pounds
- Item Dimensions: 7.3 x 7.0 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 12413103
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac STS Hub & Bearing, Front
Part Number: 19352506
$161.57 MSRP: $313.57
You Save: $152.00 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly, Front Wheel (W/Wheel Speed Sensor); Wheel Bearing & Hub Repair Kit.; Hub, Front Wheel
- Position: Front
- Replaces: 15816313
- Item Weight: 10.30 Pounds
- Item Dimensions: 9.3 x 8.5 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19352506
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac STS Submodels:
- V | 8 Cyl 4.4 L GAS
View related parts
2009 Cadillac STS Hub & Bearing
Part Number: 89047639
Product Specifications
- Other Name: Hub, Rear Wheel; Wheel Bearing and Hub Assembly; Wheel Bearing & Hub Assembly; Wheel Bearing; Axle Bearing; Wheel Hub
- Position: Rear
- Item Weight: 8.40 Pounds
- Item Dimensions: 7.2 x 7.2 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 89047639
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac STS Hub & Bearing, Rear
Part Number: 15819433
Product Specifications
- Other Name: Hub, Rear Wheel; Wheel Bearing and Hub Assembly; Wheel Bearing & Hub Assembly; Wheel Bearing; Axle Bearing; Wheel Hub
- Position: Rear
- Item Weight: 9.70 Pounds
- Item Dimensions: 7.1 x 6.3 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15819433
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac STS Submodels:
- V | 8 Cyl 4.4 L GAS
View related parts
2009 Cadillac STS Rear Speed Sensor, Front
Part Number: 19370295
$155.46 MSRP: $278.86
You Save: $123.40 (45%)
Product Specifications
- Other Name: Hub Assembly, Front Wheel (W/Wheel Speed Sensor); Hub & Bearing; Front Speed Sensor; Hub, Front Wheel; Hub, Rear Wheel
- Position: Front
- Replaces: 12413071, 25693148, 19259810
- Condition: New
- SKU: 19370295
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2009 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

2009 Cadillac STS Wheel Bearing

With a comprehensive array of OEM 2009 Cadillac STS Wheel Bearing, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Cadillac STS Wheel Bearing are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Cadillac STS Parts Questions & Experts Answers

Q: How to replace the front wheel bearing and hub on an AWD on 2009 Cadillac STS?
A: Users need to lift up and sustain the vehicle at first, withdraw the tire and wheel to replace the front Wheel Bearing and hub in awd vehicles. First remove the brake rotor then get rid of the wheel driveshaft retaining nut. Disconnect the abs connector under the splash shield and take care to avoid the boot area while removing Wheel Bearing bolts to keep the parts safe. Install tool j 45859 or an equivalent device to match the Wheel Bearing/hub profile and use it to disconnect the wheel driveshaft from the assembly before removing the Wheel Bearing/hub itself. To put in the new Wheel Bearing hub section combine these elements: place the added Wheel Bearing/hub and tighten the mounting bolts to 135 nm (100 lb ft) while joining the abs electrical connector with the splash shield. Put on a fresh wheel driveshaft retaining nut and torque it to 160 nm (118 lb ft) before replacing the brake rotor and tire along with wheel. Finally, lower the vehicle.