How to replace the Wheel Hub Bolt on a drum brake on 2010 Chevrolet Cobalt?

First lift the vehicle and put supporting stands under it before fixing the Wheel Hub Bolt on a drum brake system. You should first take off the wheel and tire then unlatch the Brake Drum. The ball joint remover tool j 43631 helps remove the old Wheel Hub Bolt which should then be thrown away. Put the new Wheel Hub Bolt into the wheel bearing hub while adding multiple washers so it enters the hub. Set the wheel nut onto the washers so its flat side faces down. Tighten the wheel nut until the Wheel Hub Bolt head touches the bearing hub back completely. Following these steps you must reinstall the Brake Drum before returning the tire and wheel assembly to its regular position while the vehicle is lowered.

OEM 2010 Chevrolet Cobalt Wheel Hub Bolt

Wheel Stud

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wheel Hub Bolt found

View related parts
2010 Chevrolet Cobalt Wheel Stud
Part Number: 9595178
$3.46 MSRP: $5.42
You Save: $1.96 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt, Wheel; Wheel Hub Repair Kit; Wheel Hub Bolt; Lower Ball Joint; Hub & Bearing Wheel Studs and Bolts; Brake Drum Wheel Stud; Front and Rear Wheel Studs and Bolts.
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.8 x 4.0 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9595178
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

2010 Chevrolet Cobalt Wheel Hub Bolt

With a comprehensive array of OEM 2010 Chevrolet Cobalt Wheel Hub Bolt, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Cobalt Wheel Hub Bolt are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Cobalt Parts Questions & Experts Answers

Q: How to replace the Wheel Hub Bolt on a drum brake on 2010 Chevrolet Cobalt?
A: First lift the vehicle and put supporting stands under it before fixing the Wheel Hub Bolt on a drum brake system. You should first take off the wheel and tire then unlatch the Brake Drum. The ball joint remover tool j 43631 helps remove the old Wheel Hub Bolt which should then be thrown away. Put the new Wheel Hub Bolt into the wheel bearing hub while adding multiple washers so it enters the hub. Set the wheel nut onto the washers so its flat side faces down. Tighten the wheel nut until the Wheel Hub Bolt head touches the bearing hub back completely. Following these steps you must reinstall the Brake Drum before returning the tire and wheel assembly to its regular position while the vehicle is lowered.