How to replace the intake camshaft and lash adjuster on 2010 Chevrolet HHR?

To replace the intake camshaft and valve lifters, take off the intake camshaft position actuator and bearing cap bolts. Remove intake cam, care taken to keep roller followers and hydraulic adjusters in their place. Lubricate the hydraulic adjusters and valve tips, replace camshaft, and bearing caps, tightening bolts in small increments. Finally, the actuator should be installed.

OEM 2010 Chevrolet HHR Lash Adjuster

Lash Adjuster Lifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Lash Adjuster found

View related parts
2010 Chevrolet HHR Valve Lifters, Green Line Part Number: 12686787
$14.33 MSRP: $23.63
You Save: $9.30 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Adjuster Assembly-Hydraulic Valve Lash; Filler Cap O-Ring; Adjuster, Engine Valve Lifter; Adjuster, Engine Valve
- Replaces: 12572638, 24100005
- Condition: New
- SKU: 12686787
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2010 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS

2010 Chevrolet HHR Lash Adjuster

With a comprehensive array of OEM 2010 Chevrolet HHR Lash Adjuster, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet HHR Lash Adjuster are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet HHR Lash Adjuster Parts and Q&A

Q: How to replace the intake camshaft and lash adjuster on 2010 Chevrolet HHR?
A: To replace the intake camshaft and valve lifters, take off the intake camshaft position actuator and bearing cap bolts. Remove intake cam, care taken to keep roller followers and hydraulic adjusters in their place. Lubricate the hydraulic adjusters and valve tips, replace camshaft, and bearing caps, tightening bolts in small increments. Finally, the actuator should be installed.