How to replace the front side door emblem/nameplate on 2010 GMC Canyon?

Begin your Canyon rear door emblem/nameplate replacement project by covering and matching the installation area with tape. Heat the emblem/nameplate with a J 25070 gun kept 152 mm above the surface and move in circles for 30 seconds. A plastic flat blade tool helps to take off the emblem/nameplate. 3M(TM) scotch brite molding adhesive remover disk (3M(TM) P/N 07501) removes all adhesive from the door panel and back of the emblem/nameplate. Clean the door surface with VMP naphtha which comes from varnish makers and painters. Without label marks on the door fix tape first and measure 251 mm (9.88 in) from the bottom and 157 mm (6.18 in) from the front edge to place the emblem/nameplate front. Use the J 25070 heating tool to warm and prepare the door surface to 21°C (70°F) without touching the emblem/nameplate adhesive backing. When pressing the emblem/nameplate onto the door panel move the backing from the front end and attach the emblem with continued backing removal. Use your hands to roll the emblem/nameplate for good sticking then check if it bonded correctly before lifting tape out from the spaces near the door symbol.

OEM 2010 GMC Canyon Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Emblems found

View related parts
2010 GMC Canyon Letter
Part Number: 15634643
$62.39 MSRP: $89.27
You Save: $26.88 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem Kit, Radiator Grille; Emblem; Nameplate; Emblem Kit, Radiator Grille And Front End Ornamentation
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.1 x 2.7 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15634643
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2010 GMC Canyon Letter
Part Number: 15634639
$28.22 MSRP: $42.01
You Save: $13.79 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem Kit, Radiator Grille; Emblem; Nameplate; Emblem Kit, Radiator Grille And Front End Ornamentation
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.2 x 2.7 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15634639
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2010 GMC Canyon Nameplate, Rear
Part Number: 10355873
$101.29 MSRP: $150.76
You Save: $49.47 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, End Gate And Rear Door Decoration; Plate Assembly, Cab And Load Carrier Outer Side Decoration; Plate, End Gate And Rear Door Decoration
- Position: Rear
- Replaces: 15207239
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.0 x 14.5 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10355873
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2010 GMC Canyon Emblem
Part Number: 84689784
$11.20 MSRP: $16.67
You Save: $5.47 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Front Side Door; Decal; Nameplate; Emblem, Cab, Load Carrier, Rear End, Door, Quarter Panel, Fender, Rocker Panel, Side Step.
- Replaces: 15223483, 15223484
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84689784
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2010 GMC Canyon Submodels:
- SL, SLE, SLT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2010 GMC Canyon Nameplate, Rear
Part Number: 15926160
$82.20 MSRP: $117.62
You Save: $35.42 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, End Gate And Rear Door Decoration; Plate, End Gate And Rear Door Decoration
- Position: Rear
- Replaces: 15207240
- Item Weight: 0.30 Pounds
- Item Dimensions: 17.2 x 1.7 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15926160
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 GMC Canyon Submodels:
- SLE, Z71 SLE, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2010 GMC Canyon Nameplate
Part Number: 84674406
$52.96 MSRP: $78.83
You Save: $25.87 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate Assembly-End Gate Divider Name *Chrome; Emblem, End Gate And Rear Door Decoration; Plate, End Gate And Rear Door Decoration
- Replaces: 22884137, 15195869, 15029627
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84674406
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2010 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2010 GMC Canyon Letter
Part Number: 15634641
$24.51 MSRP: $36.47
You Save: $11.96 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem Kit, Radiator Grille; Emblem; Nameplate; Emblem Kit, Radiator Grille And Front End Ornamentation
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.4 x 3.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15634641
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2010 GMC Canyon Nameplate, Rear
Part Number: 15926161
Product Specifications
- Other Name: Emblem, End Gate And Rear Door Decoration
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 4.3 x 1.6 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15926161
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 GMC Canyon Submodels:
- SLT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

2010 GMC Canyon Emblem

With a comprehensive array of OEM 2010 GMC Canyon Emblem, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 GMC Canyon Emblem are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 GMC Canyon Emblem Parts Questions & Experts Answers

Q: How to replace the front side door emblem/nameplate on 2010 GMC Canyon?
A: Begin your Canyon rear door emblem/nameplate replacement project by covering and matching the installation area with tape. Heat the emblem/nameplate with a J 25070 gun kept 152 mm above the surface and move in circles for 30 seconds. A plastic flat blade tool helps to take off the emblem/nameplate. 3M(TM) scotch brite molding adhesive remover disk (3M(TM) P/N 07501) removes all adhesive from the door panel and back of the emblem/nameplate. Clean the door surface with VMP naphtha which comes from varnish makers and painters. Without label marks on the door fix tape first and measure 251 mm (9.88 in) from the bottom and 157 mm (6.18 in) from the front edge to place the emblem/nameplate front. Use the J 25070 heating tool to warm and prepare the door surface to 21°C (70°F) without touching the emblem/nameplate adhesive backing. When pressing the emblem/nameplate onto the door panel move the backing from the front end and attach the emblem with continued backing removal. Use your hands to roll the emblem/nameplate for good sticking then check if it bonded correctly before lifting tape out from the spaces near the door symbol.

Related 2010 GMC Canyon Parts

Alternate Year Models

2009 GMC Canyon Emblem 2011 GMC Canyon Emblem