Other Name: Sensor, Ambient Outside Air Temperature; Ambient Air Temperature Sensor; Air Temperature Sensor; Yaw Rate Sensor; Ambient Temperature Sensor; AC Temperature Sensor; Sensor
Replaces: 10396844
Fits the following Buick Models:
Enclave | 2008-2017 | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
Encore | 2013-2022 | Base, Convenience, Essence, Leather, Preferred, Preferred II, Premium, Sport Touring | 4 Cyl 1.4 L GAS
LaCrosse | 2008-2009 | CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
Lucerne | 2008-2011 | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
Verano | 2012-2017 | Base, Convenience, Leather, Premium, Sport Touring, Turbo | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
Other Name: Sensor, Ambient Air Temperature Gage (W/Bracket); Ambient Air Temperature Sensor; Air Temperature Sensor; Ambient Temperature Sensor; Sensor, Ambient Outside Air Temperature
Position: Driver Side
Fits the following Buick Models:
LaCrosse | 2005-2007 | CX, CXL, CXS | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
Lucerne | 2006-2007 | CX, CXL, CXS | 6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS
Rainier | 2004-2007 | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
Other Name: Sensor, Ambient Outside Air Temperature; Air Temperature Sensor; Ambient Temperature Sensor; In-Car Sensor; Sensor; Sensor, Outside Rear View Manual; Sensor, Air Conditioning
Position: Passenger Side
Fits the following Buick Models:
Enclave | 2018-2024 | Avenir, Base, Essence, Preferred, Premium | 6 Cyl 3.6 L GAS
Encore GX | 2020-2023 | Essence, Preferred, Select | 3 Cyl 1.2 L GAS, 3 Cyl 1.3 L GAS
Envision | 2016-2023 | Avenir, Base, Essence, Preferred, Premium, Premium II | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
LaCrosse | 2017-2019 | Avenir, Base, Essence, Preferred, Premium, Sport Touring | 4 Cyl 2.5 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.6 L GAS
Regal Sportback | 2018-2020 | Avenir, Base, Essence, GS, Preferred, Preferred II | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
Regal TourX | 2018-2020 | Base, Essence, Preferred | 4 Cyl 2.0 L GAS
Other Name: Duct Assembly-Inside Air Temperature Sensor; In-Car Temperature Sensor; In-Car Sensor; Sensor; Sensor, A/C Electric Temperature And Motor Control
Fits the following Buick Models:
LeSabre | 2000-2005 | Custom, Limited | 6 Cyl 3.8 L GAS
Other Name: Sensor, Air Conditioner Electric Temperature And Motor Control; In-Car Temperature Sensor; In-Car Sensor; Sensor; Sensor, A/C Electric Temperature And Motor Control
Fits the following Buick Models:
Park Avenue | 1997-2005 | Base, Ultra | 6 Cyl 3.8 L GAS
Q: How to replace the lower left air temperature sensor on Buick LaCrosse?
A: In order to replace the lower left air temperature sensor, you have to extract the left closeout panel. Then remove the lower left air temperature sensor from the heater outlet cover with using counter-clockwise rotation to release it. Unplug the electrical connector that is attached to the sensor. To install, set the lower left air temperature sensor to the heater outlet cover that must be rotated clockwise to lock. This will be followed by reattaching the electrical connector to the sensor and re-attaching the left closeout panel.
Q: How to Change the Cabin Air Temperature Sensor on a Buick LeSabre?
A: Begin inside air temperature sensor replacement by removing both the right instrument panel trim plate and knee bolster. Pull the aspirator hose toward the rear to separate it from the instrument panel assembly. First unplug the temperature sensor electrical connector then pull the temperature sensor free from the aspirator hose by rotating it counterclockwise 1/4 turn. Begin by attaching the temperature sensor electrical connector before installing the inside air temperature sensor onto the aspirator hose where it should be turned clockwise 1/4 turn. After putting the aspirator hose back into place reinstall the knee bolster then install the right instrument panel trim plate.
Q: How to Change the Air Temperature Sensor Inside the Vehicle on a Buick Regal?
A: Proceeding to replace the Inside Air Temperature Sensor begins by removing the instrument panel cluster trim plate. Start by disconnecting the electrical connection at the air temperature sensor then take the sensor out from the aspirator duct. When installing the sensor make sure it forms a proper seal with the instrument panel cluster trim plate to stop airflow from behind the dash. Release the instrument panel cluster trim plate first before attaching the sensor to the aspirator duct and reconnecting both the sensor's electrical connector and re-installing the trim plate.