Other Name: Sensor, Ambient Outside Air Temperature; Ambient Air Temperature Sensor; Air Temperature Sensor; Ambient Temperature Sensor; Outside Temperature Sensor; Sensor
Replaces: 16145854
Fits the following Buick Models:
LeSabre | 1992-2005 | Custom, Limited | 6 Cyl 3.8 L GAS
Park Avenue | 1997-2005 | Base, Ultra | 6 Cyl 3.8 L GAS
Riviera | 1995-1999, 1993 | Base, Luxury | 6 Cyl 3.8 L GAS
Other Name: Sensor, A/C Refrigerant Temperature; A/C Compressor Cut-Out Switch; Air Temperature Sensor; HVAC System Switch; Automatic Temperature Sensor; Sensor; Sensor, A/C Electric Temperature And Motor Control
Other Name: Sensor, Air Conditioner Electric Temperature And Motor Control; In-Car Sensor; Aspirator, A/C Electric Temperature And Motor Control; Sensor, A/C Electric Temperature And Motor Control
Fits the following Buick Models:
Lucerne | 2006-2011 | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
Other Name: Sensor, Air Conditioner Electric Temperature And Motor Control; In-Car Temperature Sensor; Sensor; Sensor, A/C Electric Temperature And Motor Control
Replaces: 16137334
Fits the following Buick Models:
LeSabre | 1992-1999 | Custom, Limited | 6 Cyl 3.8 L GAS
Park Avenue | 1991-1996 | Base, Ultra | 6 Cyl 3.8 L GAS
Other Name: Sensor, Air Conditioner Electric Temperature And Motor Control; In-Car Temperature Sensor; In-Car Sensor; Sensor; Sensor, A/C Electric Temperature And Motor Control
Fits the following Buick Models:
Park Avenue | 1997-2005 | Base, Ultra | 6 Cyl 3.8 L GAS
Q: How to Replace an Ambient Temperature Sensor in an HVAC System on Buick LaCrosse?
A: Begin Ambient Air Temperature Sensor replacement by taking off the upper air deflector. Retaining tabs on the sensor must be pushed downwards to detach the ambient air temperature sensor while disconnecting the electrical connector. Originally connect the electrical connector to the ambient air temperature sensor before aligning retaining tabs under the sensor hole below and pushing upwards to install. Mount the upper air deflector as the final step.
Q: How to Properly Install and Remove the Ambient Temperature Sensor on Buick LeSabre?
A: First take off the electrical plug from the sensor, then remove the retainer and the sensor itself. When you're installing it, put the ambient temperature sensor and retainer on, and plug in the electrical connector to the sensor.
Q: How to replace the Ambient Temperature Sensor on Buick Regal?
A: One must begin ambient air temperature sensor replacement by disconnecting electrical connector from the ambient air temperature sensor which exists on the right front radiator air baffle. The procedure begins by uninstalling the push-in retainer from the ambient air temperature sensor followed by removing the sensor from the radiator air baffle. Position the ambient air temperature sensor on the radiator air baffle before installing the push-in retainer to secure it. Gear up the electrical connector to the ambient air temperature sensor and perform a test drive at either 32 km/h (20 mph) for 90 seconds or at 72 km/h (45 mph) for 60 seconds to acquire the ambient update.