OEM Buick Rendezvous EGR Tube

EGR Hose
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 EGR Tubes found

  • Buick Rendezvous EGR Tube - 12602651
    Buick Rendezvous EGR Tube Diagram - 12602651
    View related parts

    Buick Rendezvous EGR Pipe

    Part Number: 12602651
    $103.98 MSRP: $171.01
    You Save: $67.03 (40%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Pipe Assembly-EGR Valve; EGR Tube; Tube; Pipe, Emission System
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 2006-2007 Buick Rendezvous | CX, CXL | 6 Cyl 3.5 L GAS
  • Buick Rendezvous EGR Tube - 24508969
    Buick Rendezvous EGR Tube Diagram - 24508969
    View related parts

    Buick Rendezvous EGR Tube

    Part Number: 24508969
    $85.87 MSRP: $153.36
    You Save: $67.49 (45%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Pipe Assembly-EGR Valve; EGR Pipe; Tube; Pipe; Pipe, Emission System
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 2002-2004 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS

Buick Rendezvous EGR Tube

Our website offers an extensive catalog of genuine Buick Rendezvous EGR Tube at unbeatable prices. Every OEM Buick Rendezvous EGR Tube comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Buick Rendezvous EGR Tube Parts Questions & Experts Answers

  • Q: How to replace the EGR Tube on Buick Rendezvous?
    A: First disconnect the ignition and secure the parking brake before starting the replacement of the egr pipe. The floor jack should raise the vehicle front by 100 mm while you remove its two mounting bolts in the front section. Slowly position the frame along with powertrain about 100 mm (4 inches) down from the underbody rails to work on the egr pipe while avoiding more than a 100 mm (4 inch) drop. Set two pressure stands beneath the frame to stop it from moving. Start by removing the egr pipe bolt and the egr pipe from the EGR Valve before losing the egr pipe nut to separate the egr pipe from the Exhaust Manifold for pipe removal. Install the egr pipe to the Exhaust Manifold by tightening the egr pipe nut to 25 n.m (18 lb ft). Proceed to attach the egr pipe along with its bolt to the EGR Valve before tightening the bolt to 25 n.m (18 lb ft). Following frame and powertrain elevation by a floor jack until rails contact the underbody you can install frame bolts before removing the jack stands to lower and remove the floor jack. After this release the parking brake.

Related Buick Rendezvous Parts