Other Name: Sensor, Computer Control Sensors; Rear Oxygen Sensor
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2004 Buick Rendezvous | CXL, Ultra | 6 Cyl 3.6 L GAS
Buick Rendezvous Oxygen Sensor
Our website offers an extensive catalog of genuine Buick Rendezvous Oxygen Sensor at unbeatable prices. Every OEM Buick Rendezvous Oxygen Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Buick Rendezvous Oxygen Sensor Parts Questions & Experts Answers
Q: How to replace the heated oxygen sensor (HO2S) at Position 1 on Buick Rendezvous?
A: The replacement process of the heated oxygen sensor (HO2S) at Position 1 begins with acquiring the needed tool which is a Heated Oxygen Sensor Wrench (J 39194-B). First remove the intake manifold cover followed by removing the connector position assurance retainer and disconnect the engine harness electrical connector from the HO2S. You should remove the HO2S electrical connector clip from its position on the ignition coil bracket. You must use a Heated Oxygen Sensor Wrench (J 39194-B) to take out the HO2S but keep the pigtail connected with the permanent attachment and the connector safe. The threads of new or serviced HO2S should receive an anti-seize compound GM P/N 12377953 or equivalent when returning to use the original sensor. Follow the instructions to fasten the HO2S with a Heated Oxygen Sensor Wrench (J 39194-B) at 41 N.m (30 lb ft). Installation ends by reconnecting the engine harness electrical connector to the HO2S then installing the CPA retainer and attaching the HO2S electrical connector clip to the ignition coil bracket followed by the intake manifold cover.